This is the 'GetDP Reference Manual' for GetDP 3.6.0 (development version) (April 3, 2024). Copyright (C) 1997-2022 P. Dular and C. Geuzaine, University of Liege. GetDP Obtaining GetDP Copying conditions 1 Overview 2 How to read this manual 3 Running GetDP 4 Expressions 5 Objects 6 Types for objects 7 Short examples 8 Complete examples Appendix A File formats Appendix B Gmsh examples Appendix C Compiling the source code Appendix D Frequently asked questions Appendix E Tips and tricks Appendix F Version history Appendix G Copyright and credits Appendix H License Concept index Metasyntactic variable index Syntax index GetDP Obtaining GetDP Copying conditions 1 Overview 1.1 Numerical tools as objects 1.2 Which problems can GetDP actually solve? 1.3 Bug reports 2 How to read this manual 2.1 Syntactic rules used in this document 3 Running GetDP 4 Expressions 4.1 Comments 4.2 Includes 4.3 Expressions definition 4.4 Constants 4.5 Operators 4.5.1 Operator types 4.5.2 Evaluation order 4.6 Functions 4.7 Current values 4.8 Arguments 4.9 Run-time variables and registers 4.10 Fields 4.11 Macros, loops and conditionals 5 Objects 5.1 'Group': defining topological entities 5.2 'Function': defining global and piecewise expressions 5.3 'Constraint': specifying constraints on function spaces and formulations 5.4 'FunctionSpace': building function spaces 5.5 'Jacobian': defining jacobian methods 5.6 'Integration': defining integration methods 5.7 'Formulation': building equations 5.8 'Resolution': solving systems of equations 5.9 'PostProcessing': exploiting computational results 5.10 'PostOperation': exporting results 6 Types for objects 6.1 Types for 'Group' 6.2 Types for 'Function' 6.2.1 Math functions 6.2.2 Extended math functions 6.2.3 Green functions 6.2.4 Type manipulation functions 6.2.5 Coordinate functions 6.2.6 Miscellaneous functions 6.3 Types for 'Constraint' 6.4 Types for 'FunctionSpace' 6.5 Types for 'Jacobian' 6.6 Types for 'Integration' 6.7 Types for 'Formulation' 6.8 Types for 'Resolution' 6.9 Types for 'PostProcessing' 6.10 Types for 'PostOperation' 7 Short examples 7.1 Constant expression examples 7.2 'Group' examples 7.3 'Function' examples 7.4 'Constraint' examples 7.5 'FunctionSpace' examples 7.5.1 Nodal finite element spaces 7.5.2 High order nodal finite element space 7.5.3 Nodal finite element space with floating potentials 7.5.4 Edge finite element space 7.5.5 Edge finite element space with gauge condition 7.5.6 Coupled edge and nodal finite element spaces 7.5.7 Coupled edge and nodal finite element spaces for multiply connected domains 7.6 'Jacobian' examples 7.7 'Integration' examples 7.8 'Formulation' examples 7.8.1 Electrostatic scalar potential formulation 7.8.2 Electrostatic scalar potential formulation with floating potentials and electric charges 7.8.3 Magnetostatic 3D vector potential formulation 7.8.4 Magnetodynamic 3D or 2D magnetic field and magnetic scalar potential formulation 7.8.5 Nonlinearities, Mixed formulations, ... 7.9 'Resolution' examples 7.9.1 Static resolution (electrostatic problem) 7.9.2 Frequency domain resolution (magnetodynamic problem) 7.9.3 Time domain resolution (magnetodynamic problem) 7.9.4 Nonlinear time domain resolution (magnetodynamic problem) 7.9.5 Coupled formulations 7.10 'PostProcessing' examples 7.11 'PostOperation' examples 8 Complete examples 8.1 Electrostatic problem 8.2 Magnetostatic problem 8.3 Magnetodynamic problem Appendix A File formats A.1 Input file format A.2 Output file format A.2.1 File '.pre' A.2.2 File '.res' Appendix B Gmsh examples Appendix C Compiling the source code Appendix D Frequently asked questions D.1 The basics D.2 Installation D.3 Usage Appendix E Tips and tricks Appendix F Version history Appendix G Copyright and credits Appendix H License Concept index Metasyntactic variable index Syntax index GetDP ***** Patrick Dular and Christophe Geuzaine GetDP is a general finite element solver that uses mixed finite elements to discretize de Rham-type complexes in one, two and three dimensions. This is the 'GetDP Reference Manual' for GetDP 3.6.0 (development version) (April 3, 2024). Obtaining GetDP *************** The source code and various pre-compiled versions of GetDP (for Windows, Linux and MacOS) can be downloaded from . If you use GetDP, we would appreciate that you mention it in your work. References and the latest news about GetDP are always available on . Copying conditions ****************** GetDP is "free software"; this means that everyone is free to use it and to redistribute it on a free basis. GetDP is not in the public domain; it is copyrighted and there are restrictions on its distribution, but these restrictions are designed to permit everything that a good cooperating citizen would want to do. What is not allowed is to try to prevent others from further sharing any version of GetDP that they might get from you. Specifically, we want to make sure that you have the right to give away copies of GetDP, that you receive source code or else can get it if you want it, that you can change GetDP or use pieces of GetDP in new free programs, and that you know you can do these things. To make sure that everyone has such rights, we have to forbid you to deprive anyone else of these rights. For example, if you distribute copies of GetDP, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights. Also, for our own protection, we must make certain that everyone finds out that there is no warranty for GetDP. If GetDP is modified by someone else and passed on, we want their recipients to know that what they have is not what we distributed, so that any problems introduced by others will not reflect on our reputation. The precise conditions of the license for GetDP are found in the General Public License that accompanies the source code (*note License::). Further information about this license is available from the GNU Project webpage . Detailed copyright information can be found in *note Copyright and credits::. If you want to integrate parts of GetDP into a closed-source software, or want to sell a modified closed-source version of GetDP, you will need to obtain a different license. Please contact us directly (http://geuz.org) for more information. 1 Overview ********** GetDP (a "General environment for the treatment of Discrete Problems") is a scientific software environment for the numerical solution of integro-differential equations, open to the coupling of physical problems (electromagnetic, thermal, etc.) as well as of numerical methods (finite element method, integral methods, etc.). It can deal with such problems of various dimensions (1D, 2D or 3D) and time states (static, transient or harmonic). The main feature of GetDP is the closeness between its internal structure (written in C), the organization of data defining discrete problems (written by the user in ASCII data files) and the symbolic mathematical expressions of these problems. Its aim is to be welcoming and of easy use for both development and application levels: it consists of a working environment in which the definition of any problem makes use of a limited number of objects, which makes the environment structured and concise. It therefore gives researchers advanced developing tools and a large freedom in adding new functionalities. The modeling tools provided by GetDP can be tackled at various levels of complexity: this opens the software to a wide range of activities, such as research, collaboration, education, training and industrial studies. 1.1 Numerical tools as objects ============================== An assembly of computational tools (or objects) in GetDP leads to a problem definition structure, which is a transcription of the mathematical expression of the problem, and forms a text data file: the equations describing a phenomenon, written in a mathematical form adapted to a chosen numerical method, directly constitute data for GetDP. The resolution of a discrete problem with GetDP requires the definition, in a text data file, of the GetDP objects listed (together with their dependencies) in the following figure and table. ---------------------------------------------------------------------------- | | | -------------- | | -------->| Function |-------------------------------- | | | -------------- \ \ | | | | | --------------------------- \ | | | | \ | \ | | | \|/ ------------ | \ \|/ -------------- -------------- | | \ -------------- | Group |-->| Constraint |-------- | | \ |PostOperation | -------------- -------------- | | | \ -------------- | | | || | | | | \ /||\ *********************************************************************************************** * | | | || \|/ \|/\|/ \|/ _\| || * * | | | || -------------- -------------- -------------- -------------- * * | | | =====>|FunctionSpace |==>| Formulation |==>| Resolution |==>|PostProcessing| * * | | | -------------- -------------- -------------- -------------- * * | | | /|\/|\/|\ | /|\/|\/|\/|\ * * | | -------------------------------- | | | | | | | * * | | ----------------- | --------------------------- | | | * * | | | -------------- | | | * * | | | | Integration |---------------------------- | | * * | | | -------------- | | * * | | | | | * * | | -------------- | | * * | ----------->| Jacobian |-------------------------------------------------- | * * | -------------- | * * | | * * ------------------------------------------------------------------------------------ * * * *********************************************************************************************** Group --- Function Group Constraint Group, Function, (Resolution) FunctionSpace Group, Constraint, (Formulation), (Resolution) Jacobian Group Integration --- Formulation Group, Function, (Constraint), FunctionSpace, Jacobian, Integration Resolution Function, Formulation PostProcessing Group, Function, Jacobian, Integration, Formulation, Resolution PostOperation Group, PostProcessing The gathering of all these objects constitutes the problem definition structure, which is a copy of the formal mathematical formulation of the problem. Reading the first column of the table from top to bottom pictures the working philosophy and the linking of operations peculiar to GetDP, from group definition to results visualization. The decomposition highlighted in the figure points out the separation between the objects defining the method of resolution, which may be isolated in a "black box" (bottom) and those defining the data peculiar to a given problem (top). The computational tools which are in the center of a problem definition structure are formulations ('Formulation') and function spaces ('FunctionSpace'). Formulations define systems of equations that have to be built and solved, while function spaces contain all the quantities, i.e., functions, fields of vectors or covectors, known or not, involved in formulations. Each object of a problem definition structure must be defined before being referred to by others. A linking which always respects this property is the following: it first contains the objects defining particular data of a problem, such as geometry, physical characteristics and boundary conditions (i.e., 'Group', 'Function' and 'Constraint') followed by those defining a resolution method, such as unknowns, equations and related objects (i.e., 'Jacobian', 'Integration', 'FunctionSpace', 'Formulation', 'Resolution' and 'PostProcessing'). The processing cycle ends with the presentation of the results (i.e., lists of numbers in various formats), defined in 'PostOperation' fields. This decomposition points out the possibility of building black boxes, containing objects of the second group, adapted to treatment of general classes of problems that share the same resolution methods. 1.2 Which problems can GetDP actually solve? ============================================ The preceding explanations may seem very (too) general. Which are the problems that GetDP can actually solve? To answer this question, here is a list of methods that we have considered and coupled until now: Numerical methods finite element method boundary element method (experimental, undocumented) volume integral methods (experimental, undocumented) Geometrical models one-dimensional models (1D) two-dimensional models (2D), plane and axisymmetric three-dimensional models (3D) Time states static states sinusoidal and harmonic states transient states eigenvalue problems These methods have been successfully applied to build coupled physical models involving electromagnetic phenomena (magnetostatics, magnetodynamics, electrostatics, electrokinetics, electrodynamics, wave propagation, lumped electric circuits), acoustic phenomena, thermal phenomena and mechanical phenomena (elasticity, rigid body movement). As can be guessed from the preceding list, GetDP has been initially developed in the field of computational electromagnetics, which fully uses all the offered coupling features. We believe that this does not interfere with the expected generality of the software because a particular modeling forms a problem definition structure which is totally external to the software: GetDP offers computational tools; the user freely applies them to define and solve his problem. Nevertheless, specific numerical tools will _always_ need to be implemented to solve specific problems in areas other than those mentionned above. If you think the general phisosophy of GetDP is right for you and your problem, but you discover that GetDP lacks the tools necessary to handle it, let us know: we would love to discuss it with you. For example, at the time of this writing, many areas of GetDP would need to be improved to make GetDP as useful for computational mechanics or computational fluid dynamics as it is for computational electromagnetics... So if you have the skills and some free time, feel free to join the project: we gladly accept all code contributions! 1.3 Bug reports =============== Please file issues on . Provide as precise a description of the problem as you can, including sample input files that produce the bug. Don't forget to mention both the version of GetDP and the version of your operation system (*note Running GetDP:: to see how to get this information). See *note Frequently asked questions::, and the bug tracking system (https://gitlab.onelab.info/getdp/getdp/issues) to see which problems we already know about. 2 How to read this manual ************************* After reading *note Overview::, which depicts the general philosophy of GetDP, you might want to skip *note Expressions::, *note Objects:: and *note Types for objects:: and directly run the demo files bundled in the distribution on your computer (*note Running GetDP::). You should then open these examples with a text editor and compare their structure with the examples given in *note Short examples:: and *note Complete examples::. For each new syntax element that you fall onto, you can then go back to *note Expressions::, *note Objects::, and *note Types for objects::, and find in these chapters the detailed description of the syntactic rules as well as all the available options. Indexes for many concepts (*note Concept index::) and for all the syntax elements (*note Syntax index::) are available at the end of this manual. 2.1 Syntactic rules used in this document ========================================= Here are the rules we tried to follow when writing this user's guide. Note that metasyntactic variable definitions stay valid throughout all the manual (and not only in the sections where the definitions appear). See *note Metasyntactic variable index::, for an index of all metasyntactic variables. 1. Keywords and literal symbols are printed like 'this'. 2. Metasyntactic variables (i.e., text bits that are not part of the syntax, but stand for other text bits) are printed like THIS. 3. A colon (':') after a metasyntactic variable separates the variable from its definition. 4. Optional rules are enclosed in '<' '>' pairs. 5. Multiple choices are separated by '|'. 6. Three dots (...) indicate a possible repetition of the preceding rule. 7. For conciseness, the notation 'RULE <, RULE > ...' is replaced by 'RULE <,...>'. 8. The ETC symbol replaces nonlisted rules. 3 Running GetDP *************** GetDP has no graphical interface(1) (*note Running GetDP-Footnote-1::). It is a command-line driven program that reads a problem definition file once at the beginning of the processing. This problem definition file is a regular ASCII text file (*note Numerical tools as objects::), hence created with whatever text editor you like. If you just type the program name at your shell prompt (without any argument), you will get a short help on how to run GetDP. All GetDP calls look like getdp FILENAME OPTIONS where FILENAME is the ASCII file containing the problem definition, i.e., the structures this user's guide has taught you to create. This file can include other files (*note Includes::), so that only one problem definition file should always be given on the command line. The input files containing the problem definition structure are usually given the '.pro' extension (if so, there is no need to specify the extension on the command line). The name of this file (without the extension) is used as a basis for the creation of intermediate files during the pre-processing and the processing stages. The OPTIONS are a combination of the following commands (in any order): '-pre' RESOLUTION-ID Performs the pre-processing associated with the resolution RESOLUTION-ID. In the pre-processing stage, GetDP creates the geometric database (from the mesh file), identifies the degrees of freedom (the unknowns) of the problem and sets up the constraints on these degrees of freedom. The pre-processing creates a file with a '.pre' extension. If RESOLUTION-ID is omitted, the list of available choices is displayed. '-cal' Performs the processing. This requires that a pre-processing has been performed previously, or that a '-pre' option is given on the same command line. The performed resolution is the one given as an argument to the '-pre' option. In the processing stage, GetDP executes all the commands given in the 'Operation' field of the selected 'Resolution' object (such as matrix assemblies, system resolutions, ...). '-pos' POST-OPERATION-ID ... Performs the operations in the 'PostOperation'(s) selected by the POST-OPERATION-ID(s). This requires that a processing has been performed previously, or that a '-cal' option is given on the same command line. If POST-OPERATION-ID is omitted, the list of available choices is displayed. '-msh' FILENAME Reads the mesh (in '.msh' format) from FILENAME (*note File formats::) rather than from the default problem file name (with the '.msh' extension appended). '-msh_scaling' VALUE Multiplies the coordinates of all the nodes in the mesh by VALUE. '-gmshread' FILENAME ... Read gmsh data files (same as GmshRead in 'Resolution' operations). Allows to use such datasets outside resolutions (e.g. in pre-processing). '-split' Saves processing results in separate files (one for each timestep). '-res' FILENAME ... Loads processing results from file(s). '-name' STRING Uses STRING as the default generic file name for input or output of mesh, pre-processing and processing files. '-restart' Restarts processing of a time stepping resolution interrupted before being complete. '-solve' RESOLUTION-ID Same as '-pre RESOLUTION-ID -cal'. '-solver' FILENAME Specifies a solver option file (whose format varies depending on the linear algebra toolkit used). '-slepc' Uses SLEPc instead of Arpack as eigensolver. '-adapt' FILE Reads adaptation constraints from file. '-order' REAL Specifies the maximum interpolation order. '-cache' Caches network computations to disk. '-bin' Selects binary format for output files. '-v2' Creates mesh-based Gmsh output files when possible. '-check' Lets you check the problem structure interactively. '-v' '-verbose' INTEGER Sets the verbosity level. A value of 0 means that no information will be displayed during the processing. '-cpu' Reports CPU times for all operations. '-p' '-progress' INTEGER Sets the progress update rate. This controls the refreshment rate of the counter indicating the progress of the current computation (in %). '-onelab' NAME
Communicates with OneLab (file or server address) '-setnumber' NAME VALUE Sets constant number NAME to VALUE '-setstring' NAME VALUE Sets constant string NAME to VALUE '-info' Displays the version information. '-version' Displays the version number. '-help' Displays a message listing basic usage and available options. (1) If you are looking for a graphical front-end to GetDP, you may consider using Gmsh (available at ). Gmsh permits to construct geometries, generate meshes, launch computations and visualize results directly from within a user-friendly graphical interface. The file formats used by Gmsh for mesh generation and post-processing are the default file formats accepted by GetDP (see *note Input file format::, and *note Types for PostOperation::). 4 Expressions ************* This chapter and the next two describe in a rather formal way all the commands that can be used in the ASCII text input files. If you are just beginning to use GetDP, or just want to see what GetDP is all about, you should skip this chapter and the next two for now, have a quick look at *note Running GetDP::, and run the demo problems bundled in the distribution on your computer. You should then open the '.pro' files in a text editor and compare their structure with the examples given in *note Short examples:: and *note Complete examples::. Once you have a general idea of how the files are organized, you might want to come back here to learn more about the specific syntax of all the objects, and all the available options. 4.1 Comments ============ Both C and C++ style comments are supported and can be used in the input data files to comment selected text regions: 1. the text region comprised between '/*' and '*/' pairs is ignored; 2. the rest of a line after a double slash '//' is ignored. Comments cannot be used inside double quotes or inside GetDP keywords. 4.2 Includes ============ An input data file can be included in another input data file by placing one of the following commands (EXPRESSION-CHAR represents a file name) on a separate line, outside the GetDP objects. Any text placed after an include command on the same line is ignored. Include EXPRESSION-CHAR #include EXPRESSION-CHAR See *note Constants::, for the definition of the character expression EXPRESSION-CHAR. 4.3 Expressions definition ========================== Expressions are the basic tool of GetDP. They cover a wide range of functional expressions, from constants to formal expressions containing functions (built-in or user-defined, depending on space and time, etc.), arguments, discrete quantities and their associated differential operators, etc. Note that 'white space' (spaces, tabs, new line characters) is ignored inside expressions (as well as inside all GetDP objects). Expressions are denoted by the metasyntactic variable EXPRESSION (remember the definition of the syntactic rules in *note Syntactic rules::): EXPRESSION: ( EXPRESSION ) | INTEGER | REAL | CONSTANT-ID | QUANTITY | ARGUMENT | CURRENT-VALUE | VARIABLE-SET | VARIABLE-GET | REGISTER-SET | REGISTER-GET | OPERATOR-UNARY EXPRESSION | EXPRESSION OPERATOR-BINARY EXPRESSION | EXPRESSION OPERATOR-TERNARY-LEFT EXPRESSION OPERATOR-TERNARY-RIGHT EXPRESSION | BUILT-IN-FUNCTION-ID [ < EXPRESSION-LIST > ] < { EXPRESSION-CST-LIST } > | FUNCTION-ID [ < EXPRESSION-LIST > ] | < Real | Complex > [ EXPRESSION ] | Dt [ EXPRESSION ] | AtAnteriorTimeStep [ EXPRESSION, INTEGER ] | Order [ QUANTITY ] | Trace [ EXPRESSION, GROUP-ID ] | EXPRESSION ##INTEGER The following sections introduce the quantities that can appear in expressions, i.e., constant terminals (INTEGER, REAL) and constant expression identifiers (CONSTANT-ID, EXPRESSION-CST-LIST), discretized fields (QUANTITY), arguments (ARGUMENT), current values (CURRENT-VALUE), register values (REGISTER-SET, REGISTER-GET), operators (OPERATOR-UNARY, OPERATOR-BINARY, OPERATOR-TERNARY-LEFT, OPERATOR-TERNARY-RIGHT) and built-in or user-defined functions (BUILT-IN-FUNCTION-ID, FUNCTION-ID). The last seven cases in this definition permit to cast an expression as real or complex, get the time derivative or evaluate an expression at an anterior time step, retrieve the interpolation order of a discretized quantity, evaluate the trace of an expression, and print the value of an expression for debugging purposes. List of expressions are defined as: EXPRESSION-LIST: EXPRESSION <,...> 4.4 Constants ============= The three constant types used in GetDP are INTEGER, REAL and STRING. These types have the same meaning and syntax as in the C or C++ programming languages. Besides general expressions (EXPRESSION), purely constant expressions, denoted by the metasyntactic variable EXPRESSION-CST, are also used: EXPRESSION-CST: ( EXPRESSION-CST ) | INTEGER | REAL | CONSTANT-ID | OPERATOR-UNARY EXPRESSION-CST | EXPRESSION-CST OPERATOR-BINARY EXPRESSION-CST | EXPRESSION-CST OPERATOR-TERNARY-LEFT EXPRESSION-CST OPERATOR-TERNARY-RIGHT EXPRESSION-CST | MATH-FUNCTION-ID [ < EXPRESSION-CST-LIST > ] | #CONSTANT-ID() | CONSTANT-ID(EXPRESSION-CST) | StrFind[ EXPRESSION-CHAR, EXPRESSION-CHAR ] | StrCmp[ EXPRESSION-CHAR, EXPRESSION-CHAR ] | StrLen[ EXPRESSION-CHAR ] | StringToName[ EXPRESSION-CHAR ] | S2N[ EXPRESSION-CHAR ] | Exists[ STRING ] | FileExists[ STRING ] | GroupExists[ STRING ] | GetForced[ STRING ] | NbrRegions [ STRING ] | GetNumber[ EXPRESSION-CHAR <, EXPRESSION-CST> ] 'StrFind' searches the first EXPRESSION-CHAR for any occurrence of the second EXPRESSION-CHAR. 'StrCmp' compares the two strings (returns an integer greater than, equal to, or less than 0, according as the first string is greater than, equal to, or less than the second string). 'StrLen' returns the length of the string. 'StringToName' creates a name from the provided string. 'Exists' checks for the existence of a constant or a function. 'FileExists' checks for the existence of a file. 'GroupExists' checks for the existence of a group. 'GetForced' gets the value of a constant (zero if does not exist). 'NbrRegions' counts the numbers of elementary regions in a group. 'GetNumber' allows to get the value of a ONELAB number variable (the optional second argument specifies the default value returned if the variable does not exist). List of constant expressions are defined as: EXPRESSION-CST-LIST: EXPRESSION-CST-LIST-ITEM <,...> with EXPRESSION-CST-LIST-ITEM: EXPRESSION-CST | EXPRESSION-CST : EXPRESSION-CST | EXPRESSION-CST : EXPRESSION-CST : EXPRESSION-CST | CONSTANT-ID () | CONSTANT-ID ( { EXPRESSION-CST-LIST } ) | List[ CONSTANT-ID ] | List[ EXPRESSION-CST-LIST-ITEM ] | List[ { EXPRESSION-CST-LIST } ] | ListAlt[ CONSTANT-ID, CONSTANT-ID ] | ListAlt[ EXPRESSION-CST-LIST-ITEM, EXPRESSION-CST-LIST-ITEM ] | LinSpace[ EXPRESSION-CST, EXPRESSION-CST, EXPRESSION-CST ] | LogSpace[ EXPRESSION-CST, EXPRESSION-CST, EXPRESSION-CST ] | - EXPRESSION-CST-LIST-ITEM | EXPRESSION-CST * EXPRESSION-CST-LIST-ITEM | EXPRESSION-CST-LIST-ITEM * EXPRESSION-CST | EXPRESSION-CST / EXPRESSION-CST-LIST-ITEM | EXPRESSION-CST-LIST-ITEM / EXPRESSION-CST | EXPRESSION-CST-LIST-ITEM ^ EXPRESSION-CST | EXPRESSION-CST-LIST-ITEM + EXPRESSION-CST-LIST-ITEM | EXPRESSION-CST-LIST-ITEM - EXPRESSION-CST-LIST-ITEM | EXPRESSION-CST-LIST-ITEM * EXPRESSION-CST-LIST-ITEM | EXPRESSION-CST-LIST-ITEM / EXPRESSION-CST-LIST-ITEM | ListFromFile [ EXPRESSION-CHAR ] | ListFromServer [ EXPRESSION-CHAR ] | ReadTable [ EXPRESSION-CHAR, EXPRESSION-CHAR ] The second case in this last definition permits to create a list containing the range of numbers comprised between the two EXPRESSION-CST, with a unit incrementation step. The third case also permits to create a list containing the range of numbers comprised between the two EXPRESSION-CST, but with a positive or negative incrementation step equal to the third EXPRESSION-CST. The fourth and fifth cases permit to reference constant identifiers (CONSTANT-IDs) of lists of constants and constant identifiers of sublists of constants (see below for the definition of constant identifiers) . The sixth case is a synonym for the fourth. The seventh case permits to create alternate lists: the arguments of 'ListAlt' must be CONSTANT-IDs of lists of constants of the same dimension. The result is an alternate list of these constants: first constant of argument 1, first constant of argument 2, second constant of argument 1, etc. These kinds of lists of constants are for example often used for function parameters (*note Functions::). The next two cases permit to create linear and logarithmic lists of numbers, respectively. The remaining cases permit to apply arithmetic operators item-wise in lists. 'ListFromFile' reads a list of numbers from a file. 'ListFromServer' attemps to get a list of numbers from the ONELAB variable EXPRESSION-CHAR. 'ReadTable' reads tabular data in the same format as 'ListFromFile', and in addition stores in the run-time table named after the second EXPRESSION-CHAR. Contrary to a general EXPRESSION which is evaluated at runtime (thanks to an internal stack mechanism), an EXPRESSION-CST is completely evaluated during the syntactic analysis of the problem (when GetDP reads the '.pro' file). The definition of such constants or lists of constants with identifiers can be made outside or inside any GetDP object. The syntax for the definition of constants is: AFFECTATION: DefineConstant [ CONSTANT-ID < = EXPRESSION-CST > <,...> ]; | DefineConstant [ CONSTANT-ID = { EXPRESSION-CST , ONELAB-OPTIONS } <,...> ]; | DefineConstant [ STRING-ID < = STRING-DEF > <,...> ]; | DefineConstant [ STRING-ID = { STRING-DEF , ONELAB-OPTIONS } <,...> ]; | CONSTANT-ID <()> = CONSTANT-DEF; | CONSTANT-ID = DefineNumber[ CONSTANT-DEF, ONELAB-OPTIONS ]; STRING-ID <()> = STRING-DEF; | STRING-ID = DefineString[ STRING-DEF, ONELAB-OPTIONS ]; | Printf [ "STRING" ] < > | >> STRING-DEF >; | Printf [ "STRING", EXPRESSION-CST-LIST ] < > | >> STRING-DEF >; | Read [ CONSTANT-ID ] ; | Read [ CONSTANT-ID , EXPRESSION-CST ]; | UndefineConstant | Delete [ CONSTANT-ID ] ; UndefineFunction [ CONSTANT-ID ] ; SetNumber[ STRING , EXPRESSION-CST ]; SetString[ STRING , STRING-DEF ]; with CONSTANT-ID: STRING | STRING ( EXPRESSION-CST-LIST ) | STRING ~ { EXPRESSION-CST } <,...> CONSTANT-DEF: EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST } STRING-ID: STRING | STRING ~ { EXPRESSION-CST } <,...> STRING-DEF: "STRING" | StrCat[ EXPRESSION-CHAR <,...> ] | Str[ EXPRESSION-CHAR <,...> ] Notes: 1. Five constants are predefined in GetDP: 'Pi' (3.1415926535897932), '0D' (0), '1D' (1), '2D' (2) and '3D' (3). 2. When '~{EXPRESSION-CST}' is appended to a string STRING, the result is a new string formed by the concatenation of STRING, '_' (an underscore) and the value of the EXPRESSION-CST. This is most useful in loops (*note Macros loops and conditionals::), where it permits to define unique strings automatically. For example, For i In {1:3} x~{i} = i; EndFor is the same as x_1 = 1; x_2 = 2; x_3 = 3; 3. The assignment in 'DefineConstant' (zero if no EXPRESSION-CST is given) is performed only if CONSTANT-ID has not yet been defined. This kind of explicit default definition mechanism is most useful in general problem definition structures making use of a large number of generic constants, functions or groups. When exploiting only a part of a complex problem definition structure, the default definition mechanism allows to define the quantities of interest only, the others being assigned a default value (that will not be used during the processing but that avoids the error messages produced when references to undefined quantities are made). When ONELAB-OPTIONS are provided, the parameter is exchanged with the ONELAB server. See for more information. 4. 'DefineNumber' and 'DefineString' allow to define a ONELAB parameter. In this case the affectation always takes place. 'SetNumber' and 'SetString' allow the direct setting of ONELAB parameters without defining local variables. See *note Constant expression examples::, as well as *note Function examples::, for some examples. Character expressions are defined as follows: EXPRESSION-CHAR: "STRING" | STRING-ID | StrCat[ EXPRESSION-CHAR <,...> ] | Str[ EXPRESSION-CHAR <,...> ] StrChoice[ EXPRESSION, EXPRESSION-CHAR, EXPRESSION-CHAR ] | StrSub[ EXPRESSION-CHAR, EXPRESSION, EXPRESSION ] | StrSub[ EXPRESSION-CHAR, EXPRESSION ] | UpperCase [ EXPRESSION-CHAR ] | Sprintf [ EXPRESSION-CHAR ] | Sprintf[ EXPRESSION-CHAR, EXPRESSION-CST-LIST ] | NameToString ( STRING ) | N2S ( STRING ) | GetString[ EXPRESSION-CHAR <, EXPRESSION-CHAR,> ] | Date | CurrentDirectory | CurrentDir | AbsolutePath [ EXPRESSION-CHAR ] | DirName [ EXPRESSION-CHAR ] | OnelabAction 'StrCat' and 'Str' permit to concatenate character expressions ('Str' adds a newline character after each string except the last) when creating a string. 'Str' is also used to create string lists (when STRING-ID is followed by '()'). 'StrChoice' returns the first or second EXPRESSION-CHAR depending on the value of EXPRESSION. 'StrSub' returns the portion of the string that starts at the character position given by the first EXPRESSION and spans the number of characters given by the second EXPRESSION or until the end of the string (whichever comes first; or always if the second EXPRESSION is not provided). 'UpperCase' converts the EXPRESSION-CHAR to upper case. 'Sprintf' is equivalent to the 'sprintf' C function (where EXPRESSION-CHAR is a format string that can contain floating point formatting characters: '%e', '%g', etc.). 'NameToString' converts a variable name into a string. 'GetString' allows to get the value of a ONELAB string variable (the optional second argument specifies the default value returned if the variable does not exist.) 'Date' permits to access the current date. 'CurrentDirectory' and 'CurrentDir' return the directory of the '.pro' file. 'AbsolutePath' returns the absolute path of a file. 'DirName' returns the directory of a file. 'OnelabAction' returns the current ONELAB action (e.g. 'check' or 'compute'). List of character expressions are defined as: EXPRESSION-CHAR-LIST: EXPRESSION-CHAR <,...> 4.5 Operators ============= 4.5.1 Operator types -------------------- The operators in GetDP are similar to the corresponding operators in the C or C++ programming languages. OPERATOR-UNARY: '-' Unary minus. '!' Logical not. OPERATOR-BINARY: '^' Exponentiation. The evaluation of the both arguments must result in a scalar value. '*' Multiplication or scalar product, depending on the type of the arguments. '/\' Cross product. The evaluation of both arguments must result in vectors. '/' Division. '%' Modulo. The evaluation of the second argument must result in a scalar value. '+' Addition. '-' Subtraction. '==' Equality. '!=' Inequality. '>' Greater. The evaluation of both arguments must result in scalar values. '>=' Greater or equality. The evaluation of both arguments must result in scalar values. '<' Less. The evaluation of both arguments must result in scalar values. '<=' Less or equality. The evaluation of both arguments must result in scalar values. '&&' Logical 'and'. The evaluation of both arguments must result in scalar values. '||' Logical 'or'. The evaluation of both arguments must result in floating point values. Warning: the logical 'or' always (unlike in C or C++) implies the evaluation of both arguments. That is, the second operand of '||' is evaluated even if the first one is true. '&' Binary 'and'. '|' Binary 'or'. '>>' Bitwise right-shift operator. Shifts the bits of the first argument to the right by the number of bits specified by the second argument. '<<' Bitwise left-shift operator. Shifts the bits of the first argument to the left by the number of bits specified by the second argument. OPERATOR-TERNARY-LEFT: '?' OPERATOR-TERNARY-RIGHT: ':' The only ternary operator, formed by OPERATOR-TERNARY-LEFT and OPERATOR-TERNARY-RIGHT is defined as in the C or C++ programming languages. The ternary operator first evaluates its first argument (the EXPRESSION-CST located before the '?'), which must result in a scalar value. If it is true (non-zero) the second argument (located between '?' and ':') is evaluated and returned; otherwise the third argument (located after ':') is evaluated and returned. 4.5.2 Evaluation order ---------------------- The evaluation priorities are summarized below (from stronger to weaker, i.e., '^' has the highest evaluation priority). Parentheses '()' may be used anywhere to change the order of evaluation. '^' '- (unary), !' '| &' '/\' '*, /, %' '+, -' '<, >, <=, >=, <<, >>' '!=, ==' '&&, ||' '?:' 4.6 Functions ============= Two types of functions coexist in GetDP: user-defined functions (FUNCTION-ID, see *note Function::) and built-in functions (BUILT-IN-FUNCTION-ID, defined in this section). Both types of functions are always followed by a pair of brackets '[]' that can possibly contain arguments (*note Arguments::). This makes it simple to distinguish a FUNCTION-ID or a BUILT-IN-FUNCTION-ID from a CONSTANT-ID. As shown below, built-in functions might also have parameters, given between braces '{}', and which are completely evaluated during the analysis of the syntax (since they are of EXPRESSION-CST-LIST type): BUILT-IN-FUNCTION-ID [ < EXPRESSION-LIST > ] < { EXPRESSION-CST-LIST } > with BUILT-IN-FUNCTION-ID: MATH-FUNCTION-ID | EXTENDED-MATH-FUNCTION-ID | GREEN-FUNCTION-ID | TYPE-FUNCTION-ID | COORD-FUNCTION-ID | MISC-FUNCTION-ID Notes: 1. All possible values for BUILT-IN-FUNCTION-ID are listed in *note Types for Function::. 2. Classical mathematical functions (*note Math functions::) are the only functions allowed in a constant definition (see the definition of EXPRESSION-CST in *note Constants::). 4.7 Current values ================== Current values return the current floating point value of an internal GetDP variable: '$Time' Value of the current time. This value is set to zero for non time dependent analyses. '$DTime' Value of the current time increment used in a time stepping algorithm. '$Theta' Current theta value in a theta time stepping algorithm. '$TimeStep' Number of the current time step in a time stepping algorithm. '$Breakpoint' In case of a breakpoint hit in TimeLoopAdaptive it is the number of the current breakpoint. In the other case when $Time corresponds not to a breakpoint the value is -1. '$Iteration, $NLIteration' Current iteration in a nonlinear loop. '$Residual, $NLResidual' Current residual in a nonlinear loop. '$EigenvalueReal' Real part of the current eigenvalue. '$EigenvalueImag' Imaginary part of the current eigenvalue. '$X, $XS' Value of the current (destination or source) X-coordinate. '$Y, $YS' Value of the current (destination or source) Y-coordinate. '$Z, $ZS' Value of the current (destination or source) Z-coordinate. '$A, $B, $C' Value of the current parametric coordinates used in the parametric 'OnGrid' 'PostOperation' (*note Types for PostOperation::). '$QuadraturePointIndex' Index of the current quadrature point. '$KSPIteration' Current iteration in a Krylov subspace solver. '$KSPResidual' Current residual in a Krylov subspace solver. '$KSPIterations' Total number of iterations of Krylov subspace solver. '$KSPSystemSize' System size of Krylov subspace solver. Note: 1. The current X, Y and Z coordinates refer to the 'physical world' coordinates, i.e., coordinates in which the mesh is expressed. Current values are "read-only". User-defined run-time variables, which share the same syntax but whose value can be changed in an EXPRESSION, are defined in *note Run-time variables and registers::. 4.8 Arguments ============= Function arguments can be used in expressions and have the following syntax (INTEGER indicates the position of the argument in the EXPRESSION-LIST of the function, starting from 1): ARGUMENT: $INTEGER See *note Function::, and *note Function examples::, for more details. 4.9 Run-time variables and registers ==================================== Constant expressions (EXPRESSION-CSTs) are evaluated only once during the analysis of the problem definition structure, cf. *note Constants::. While this is perfectly fine in most situations, sometimes it is necessary to store and modify variables at run-time. For example, an iteration in a 'Resolution' could depend on values computed at run-time. Also, to speed-up the evaluation of EXPRESSIONs (which are evaluated at runtime through GetDP's internal stack mechanism), it can be useful to save some results in a temporary variable, at run-time, in order to reuse them later on. Two mechanisms exit to handle such cases: run-time variables (which follow the same syntax as *note Current values::), and registers. Run-time variables have the following syntax: VARIABLE-SET: $VARIABLE-ID = EXPRESSION VARIABLE-GET: $VARIABLE-ID VARIABLE-ID: STRING | STRING ~ { EXPRESSION-CST } <,...> Thus, run-time variables can simply be defined anywhere in an EXPRESSION and be reused later on. Current values can be seen as special cases of run-time variables, which are read-only. Registers have the following syntax: REGISTER-SET: EXPRESSION#EXPRESSION-CST REGISTER-GET: #EXPRESSION-CST Thus, to store any expression in the register 5, one should add '#5' directly after the expression. To reuse the value stored in this register, one simply uses '#5' instead of the expression it should replace. See *note Function examples::, for an example. 4.10 Fields =========== A discretized quantity (defined in a function space, cf. *note FunctionSpace::) is represented between braces '{}', and can only appear in well-defined expressions in 'Formulation' (*note Formulation::) and 'PostProcessing' (*note PostProcessing::) objects: QUANTITY: < QUANTITY-DOF > { < QUANTITY-OPERATOR > QUANTITY-ID } | { < QUANTITY-OPERATOR > QUANTITY-ID } [ EXPRESSION-CST-LIST ] with QUANTITY-ID: STRING | STRING ~ { EXPRESSION-CST } and QUANTITY-DOF: 'Dof' Defines a vector of discrete quantities (vector of 'D'egrees 'o'f 'f'reedom), to be used only in 'Equation' terms of formulations to define (elementary) matrices. Roughly said, the 'Dof' symbol in front of a discrete quantity indicates that this quantity is an unknown quantity, and should therefore not be considered as already computed. An 'Equation' term must be linear with respect to the 'Dof'. Thus, for example, a nonlinear term like Integral { [ f[] * Dof{T}^4 , {T} ]; ... } must first be linearized; and while Integral { [ f[] * Dof{T} , {T} ]; ... } Integral { [ -f[] * 12 , {T} ]; ... } is valid, the following, which is affine but not linear, is not: Integral { [ f[] * (Dof{T} - 12) , {T} ]; ... } GetDP supports two linearization techniques. The first is functional iteration (or Picard method), where one simply plugs the value obtained at the previous iteration into the nonlinear equation (the previous value is known, and is accessed e.g. with '{T}' instead 'Dof{T}'). The second is the Newton-Raphson iteration, where the Jacobian is specified with a 'JacNL' equation term. 'BF' Indicates that only a basis function will be used (only valid with basis functions associated with regions). QUANTITY-OPERATOR: 'd' Exterior derivative (d): applied to a P-form, gives a (P+1)-form. 'Grad' Gradient: applied to a scalar field, gives a vector. 'Curl' 'Rot' Curl: applied to a vector field, gives a vector. 'Div' Divergence (div): applied to a vector field, gives a scalar. 'D1' Applies the operator specified in the first argument of 'dFunction { BASIS-FUNCTION-TYPE, BASIS-FUNCTION-TYPE }' (*note FunctionSpace::). This is currently only used for nodal-interpolated vector fields (interpolated with 'BF_Node_X', 'BF_Node_Y', 'BF_Node_Z') When the first BASIS-FUNCTION-TYPE in 'dFunction' is set to 'BF_NodeX_D1' for component X, 'BF_NodeY_D1' for component Y and 'BF_NodeZ_D1' for component Z, then 'D1' applied to a vector [u_x, u_y, u_z] gives: [du_x/dx, du_y/dy, du_z/dz] Note that in this case specifying explicitely 'dFunction' is not necessary, as 'BF_NodeX_D1', 'BF_NodeY_D1' and 'BF_NodeZ_D1' are assigned by default as the "'D1' derivatives" of 'BF_NodeX', 'BF_NodeY' and 'BF_NodeZ'. This also holds for 'BF_GroupOfNodes_X', 'BF_GroupOfNodes_Y' and 'BF_GroupOfNodes_Z'. When the first BASIS-FUNCTION-TYPE in 'dFunction' is set to 'BF_NodeX_D12' for component X and 'BF_NodeY_D12' for component Y, then 'D1' applied to a vector [u_x, u_y] gives: [du_x/dx, du_y/dy, du_y/dx + du_x/dy] 'D2' Applies the operator specified in the second argument of 'dFunction { BASIS-FUNCTION-TYPE, BASIS-FUNCTION-TYPE }' (*note FunctionSpace::). This is currently only used for nodal-interpolated vector fields (interpolated with 'BF_Node_X', 'BF_Node_Y', 'BF_Node_Z') More specifically, when the second BASIS-FUNCTION-TYPE is to 'BF_NodeX_D2' for component X, 'BF_NodeY_D2' for component Y and 'BF_NodeZ_D2' for component Z, then 'D2' applied to a vector [u_x, u_y, u_z] gives: [du_y/dx + du_x/dy, du_z/dy + du_y/dz, du_x/dz + du_z/dx] Note that in this case specifying explicitely 'dFunction' is not necessary, as 'BF_NodeX_D2', 'BF_NodeY_D2' and 'BF_NodeZ_D2' are assigned by default as the "'D2' derivatives" of 'BF_NodeX', 'BF_NodeY' and 'BF_NodeZ'. This also holds for 'BF_GroupOfNodes_X', 'BF_GroupOfNodes_Y' and 'BF_GroupOfNodes_Z'. Notes: 1. While the operators 'Grad', 'Curl' and 'Div' can be applied to 0, 1 and 2-forms respectively, the exterior derivative operator 'd' is usually preferred with such fields. 2. The second case permits to evaluate a discretized quantity at a certain position X, Y, Z (when EXPRESSION-CST-LIST contains three items) or at a specific time, N time steps ago (when EXPRESSION-CST-LIST contains a single item). 4.11 Macros, loops and conditionals =================================== Macros are defined as follows: 'Macro STRING | EXPRESSION-CHAR' Begins the declaration of a user-defined file macro named STRING. The body of the macro starts on the line after ''Macro STRING'', and can contain any GetDP command. 'Return' Ends the body of the current user-defined file macro. Macro declarations cannot be imbricated, and must be made outside any GetDP object. 'Macro ( EXPRESSION-CHAR , EXPRESSION-CHAR ) ;' Begins the declaration of a user-defined string macro. The body of the macro is given explicitly as the second argument. Macros, loops and conditionals can be used in any of the following objects: Group, Function, Constraint (as well as in a contraint-case), FunctionSpace, Formulation (as well as in the quantity and equation defintions), Resolution (as well as resolution-term, system defintion and operations), PostProcessing (in the definition of the PostQuantities) and PostOperation (as well as in the operation list). LOOP: 'Call STRING | EXPRESSION-CHAR;' Executes the body of a (previously defined) macro named STRING. 'For ( EXPRESSION-CST : EXPRESSION-CST )' Iterates from the value of the first EXPRESSION-CST to the value of the second EXPRESSION-CST, with a unit incrementation step. At each iteration, the commands comprised between ''For ( EXPRESSION-CST : EXPRESSION-CST )'' and the matching 'EndFor' are executed. 'For ( EXPRESSION-CST : EXPRESSION-CST : EXPRESSION-CST )' Iterates from the value of the first EXPRESSION-CST to the value of the second EXPRESSION-CST, with a positive or negative incrementation step equal to the third EXPRESSION-CST. At each iteration, the commands comprised between ''For ( EXPRESSION-CST : EXPRESSION-CST : EXPRESSION-CST )'' and the matching 'EndFor' are executed. 'For STRING In { EXPRESSION-CST : EXPRESSION-CST }' Iterates from the value of the first EXPRESSION-CST to the value of the second EXPRESSION-CST, with a unit incrementation step. At each iteration, the value of the iterate is affected to an expression named STRING, and the commands comprised between ''For STRING In { EXPRESSION-CST : EXPRESSION-CST }'' and the matching 'EndFor' are executed. 'For STRING In { EXPRESSION-CST : EXPRESSION-CST : EXPRESSION-CST }' Iterates from the value of the first EXPRESSION-CST to the value of the second EXPRESSION-CST, with a positive or negative incrementation step equal to the third EXPRESSION-CST. At each iteration, the value of the iterate is affected to an expression named STRING, and the commands comprised between ''For STRING In { EXPRESSION-CST : EXPRESSION-CST : EXPRESSION-CST }'' and the matching 'EndFor' are executed. 'EndFor' Ends a matching 'For' command. 'If ( EXPRESSION-CST )' The body enclosed between ''If ( EXPRESSION-CST )'' and the matching 'ElseIf', 'Else' or 'EndIf', is evaluated if EXPRESSION-CST is non-zero. 'ElseIf ( EXPRESSION-CST )' The body enclosed between ''ElseIf ( EXPRESSION-CST )'' and the next matching 'ElseIf', 'Else' or 'EndIf', is evaluated if EXPRESSION-CST is non-zero and none of the EXPRESSION-CST of the previous matching codes 'If' and 'ElseIf' were non-zero. 'Else' The body enclosed between 'Else' and the matching 'EndIf' is evaluated if none of the EXPRESSION-CST of the previous matching codes 'If' and 'ElseIf' were non-zero. 'EndIf' Ends a matching 'If' command. 'LevelTest' Variable equal to the level of imbrication of a body in an 'If'-'EndIf' test. 'Parse [ EXPRESSION-CHAR ];' Parse the given string. 5 Objects ********* This chapter presents the formal definition of the ten GetDP objects mentioned in *note Overview::. To be concise, all the possible parameters for these objects are not given here (cf. the ETC syntactic rule defined in *note Syntactic rules::). Please refer to *note Types for objects::, for the list of all available options. 5.1 'Group': defining topological entities ========================================== Meshes (grids) constitute the input data of GetDP. All that is needed by GetDP as a mesh is a file containing a list of nodes (with their coordinates) and a list of geometrical elements with, for each one, a number characterizing its geometrical type (i.e., line, triangle, quadrangle, tetrahedron, hexahedron, prism, etc.), a number characterizing the physical region to which it belongs and the list of its nodes. This minimal input set should be easy to extract from most of the classical mesh file formats (*note Input file format::, for a complete description of the mesh file format read by GetDP). Groups of geometrical entities of various types can be considered and are used in many objects. There are region groups, of which the entities are regions, and function groups, with nodes, edges, facets, volumes, groups of nodes, edges of tree, facets of tree, ... of regions. Amongst region groups, elementary and global groups can be distinguished: elementary groups are relative to single regions (e.g., physical regions in which piecewise defined functions or constraints can be defined) while global groups are relative to sets of regions for which given treatments have to be performed (e.g., domain of integration, support of a function space, etc.). Groups of function type contain lists of entities built on some region groups (e.g., nodes for nodal elements, edges for edge elements, edges of tree for gauge conditions, groups of nodes for floating potentials, elements on one side of a surface for cuts, etc.). A definition of initially empty groups can be obtained thanks to a 'DefineGroup' command, so that their identifiers exist and can be referred to in other objects, even if these groups are not explicitly defined. This procedure is similar to the 'DefineConstant' procedure introduced for constants in *note Constants::. The syntax for the definition of groups is: Group { < DefineGroup [ GROUP-ID <{INTEGER}> <,...> ]; > ... < GROUP-ID = GROUP-DEF; > ... < GROUP-ID += GROUP-DEF; > ... < GROUP-ID -= GROUP-DEF; > ... < AFFECTATION > ... < LOOP > ... } with GROUP-ID: STRING | STRING ~ { EXPRESSION-CST } GROUP-DEF: GROUP-TYPE [ GROUP-LIST <, GROUP-SUB-TYPE GROUP-LIST > ] | GROUP-ID <{}> | #GROUP-LIST GROUP-TYPE: Region | Global | NodesOf | EdgesOf | ETC GROUP-LIST: All | GROUP-LIST-ITEM | { GROUP-LIST-ITEM <,...> } GROUP-LIST-ITEM: INTEGER | INTEGER : INTEGER | INTEGER : INTEGER : INTEGER | GROUP-ID <{}> GROUP-SUB-TYPE: Not | StartingOn | OnPositiveSideOf | ETC Notes: 1. INTEGER as a GROUP-LIST-ITEM is the only interface with the mesh; with each element is associated a region number, being this INTEGER, and a geometrical type (*note Input file format::). Ranges of integers can be specified in the same way as ranges of constant expressions in an EXPRESSION-CST-LIST-ITEM (*note Constants::). For example, 'I:J' replaces the list of consecutive integers I, I+1, ..., J-1, J. 2. Array of groups: 'DefineGroup[GROUP-ID{N}]' defines the empty groups 'GROUP-ID{I}', I=1, ..., n. Such a definition is optional, i.e., each 'GROUP-ID{I}' can be separately defined, in any order. 3. '#GROUP-LIST' is an abbreviation of 'Region[GROUP-LIST]'. See *note Types for Group::, for the complete list of options and *note Group examples::, for some examples. 5.2 'Function': defining global and piecewise expressions ========================================================= A user-defined function can be global in space or piecewise defined in region groups. A physical characteristic is an example of a piecewise defined function (e.g., magnetic permeability, electric conductivity, etc.) and can be simply a constant, for linear materials, or a function of one or several arguments for nonlinear materials. Such functions can of course depend on space coordinates or time, which can be needed to express complex constraints. A definition of initially empty functions can be made thanks to the 'DefineFunction' command so that their identifiers exist and can be referred to (but cannot be used) in other objects. The syntax for the definition of functions is: Function { < DefineFunction [ FUNCTION-ID <,...> ]; > ... < FUNCTION-ID [ < GROUP-DEF <, GROUP-DEF > > ] = EXPRESSION; > ... < AFFECTATION > ... < LOOP > ... } with FUNCTION-ID: STRING Note: 1. The first optional GROUP-DEF in brackets must be of 'Region' type, and indicates on which region the (piecewise) function is defined. The second optional GROUP-DEF in brackets, also of 'Region' type, defines an association with a second region for mutual contributions. A default piecewise function can be defined with 'All' for GROUP-DEF, for all the other non-defined regions. Warning: it is incorrect to write 'f[reg1]=1; g[reg2]=f[]+1;' since the domains of definition of 'f[]' and 'g[]' don't match. 2. One can also define initially empty functions inline by replacing the expression with '***'. See *note Types for Function::, for the complete list of built-in functions and *note Function examples::, for some examples. 5.3 'Constraint': specifying constraints on function spaces and formulations ============================================================================ Constraints can be referred to in 'FunctionSpace' objects to be used for boundary conditions, to impose global quantities or to initialize quantities. These constraints can be expressed with functions or be imposed by the pre-resolution of another discrete problem. Other constraints can also be defined, e.g., constraints of network type for the definition of circuit connections, to be used in 'Formulation' objects. The syntax for the definition of constraints is: Constraint { { < Append < EXPRESSION-CST >; > Name CONSTRAINT-ID; Type CONSTRAINT-TYPE; Case { { Region GROUP-DEF; < Type CONSTRAINT-TYPE; > < SubRegion GROUP-DEF; > < TimeFunction EXPRESSION; > < RegionRef GROUP-DEF; > < SubRegionRef GROUP-DEF; > < Coefficient EXPRESSION; > < Function EXPRESSION; > < Filter EXPRESSION; > CONSTRAINT-VAL; } ... < LOOP > ... } | Case CONSTRAINT-CASE-ID { { Region GROUP-DEF; < Type CONSTRAINT-TYPE; > CONSTRAINT-CASE-VAL; } ... < LOOP > ... } ... } ... < AFFECTATION > ... < LOOP > ... } with CONSTRAINT-ID: CONSTRAINT-CASE-ID: STRING | STRING ~ { EXPRESSION-CST } CONSTRAINT-TYPE: Assign | Init | Network | Link | ETC CONSTRAINT-VAL: Value EXPRESSION | NameOfResolution RESOLUTION-ID | ETC CONSTRAINT-CASE-VAL: Branch { INTEGER, INTEGER } | ETC Notes: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive) permits to append an existing 'Constraint' of the same 'Name' with additional 'Case's. 2. The constraint type CONSTRAINT-TYPE defined outside the 'Case' fields is applied to all the cases of the constraint, unless other types are explicitly given in these cases. The default type is 'Assign'. 3. The region type 'Region GROUP-DEF' will be the main GROUP-LIST argument of the GROUP-DEF to be built for the constraints of 'FunctionSpace's. The optional region type 'SubRegion GROUP-DEF' will be the argument of the associated GROUP-SUB-TYPE. 4. EXPRESSION in 'Value' of CONSTRAINT-VAL cannot be time dependent ('$Time') because it is evaluated only once during the pre-processing (for efficiency reasons). Time dependences must be defined in 'TimeFunction EXPRESSION'. See *note Types for Constraint::, for the complete list of options and *note Constraint examples::, for some examples. 5.4 'FunctionSpace': building function spaces ============================================= A 'FunctionSpace' is characterized by the type of its interpolated fields, one or several basis functions and optional constraints (in space and time). Subspaces of a function space can be defined (e.g., for the use with hierarchical elements), as well as direct associations of global quantities (e.g., floating potential, electric charge, current, voltage, magnetomotive force, etc.). A key point is that basis functions are defined by any number of subsets of functions, being added. Each subset is characterized by associated built-in functions for evaluation, a support of definition and a set of associated supporting geometrical entities (e.g., nodes, edges, facets, volumes, groups of nodes, edges incident to a node, etc.). The freedom in defining various kinds of basis functions associated with different geometrical entities to interpolate a field permits to build made-to-measure function spaces adapted to a wide variety of field approximations (*note FunctionSpace examples::). The syntax for the definition of function spaces is: FunctionSpace { { < Append < EXPRESSION-CST >; > Name FUNCTION-SPACE-ID; Type FUNCTION-SPACE-TYPE; BasisFunction { { Name BASIS-FUNCTION-ID; NameOfCoef COEF-ID; Function BASIS-FUNCTION-TYPE < { Quantity QUANTITY-ID; Formulation FORMULATION-ID { EXPRESSION-CST }; Group GROUP-DEF; Resolution RESOLUTION-ID { EXPRESSION-CST } } >; < dFunction { BASIS-FUNCTION-TYPE, BASIS-FUNCTION-TYPE } ; > Support GROUP-DEF; Entity GROUP-DEF; } ... } < SubSpace { { < Append < EXPRESSION-CST >; > Name SUB-SPACE-ID; NameOfBasisFunction BASIS-FUNCTION-LIST; } ... } > < GlobalQuantity { { Name GLOBAL-QUANTITY-ID; Type GLOBAL-QUANTITY-TYPE; NameOfCoef COEF-ID; } ... } > < Constraint { { NameOfCoef COEF-ID; EntityType Auto | GROUP-TYPE; < EntitySubType GROUP-SUB-TYPE; > NameOfConstraint CONSTRAINT-ID <{}>; } ... } > } ... < AFFECTATION > ... < LOOP > ... } with FUNCTION-SPACE-ID: FORMULATION-ID: RESOLUTION-ID: STRING | STRING ~ { EXPRESSION-CST } BASIS-FUNCTION-ID: COEF-ID: SUB-SPACE-ID: GLOBAL-QUANTITY-ID: STRING FUNCTION-SPACE-TYPE: Scalar | Vector | Form0 | Form1 | ETC BASIS-FUNCTION-TYPE: BF_Node | BF_Edge | ETC BASIS-FUNCTION-LIST: BASIS-FUNCTION-ID | { BASIS-FUNCTION-ID <,...> } GLOBAL-QUANTITY-TYPE: AliasOf | AssociatedWith Notes: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive; its omission fixes it to a top value) permits to append an existing 'FunctionSpace' of the same 'Name' with additional 'BasisFunction's, 'SubSpace's, 'GlobalQuantity''s and 'Constraint's, or an existing 'SubSpace' of the same 'Name' with additional 'NameOfBasisFunction''s. If the 'Append' 'FunctionSpace' level is 2, the 'Append' 'SubSpace' level is automatically 1 if omitted. 2. When the definition region of a function type group used as an 'Entity' of a 'BasisFunction' is the same as that of the associated 'Support', it is replaced by 'All' for more efficient treatments during the computation process (this prevents the construction and the analysis of a list of geometrical entities). 3. The same 'Name' for several 'BasisFunction' fields permits to define piecewise basis functions; separate 'NameOfCoef's must be defined for those fields. 4. A constraint is associated with geometrical entities defined by an automatically created 'Group' of type GROUP-TYPE ('Auto' automatically fixes it as the 'Entity' GROUP-DEF type of the related 'BasisFunction'), using the 'Region' defined in a 'Constraint' object as its main argument, and the optional 'SubRegion' in the same object as a GROUP-SUB-TYPE argument. 5. A global basis function ('BF_Global' or 'BF_dGlobal') needs parameters, i.e., it is given by the quantity (QUANTITY-ID) pre-computed from multiresolutions performed on multiformulations. 6. Explicit derivatives of the basis functions can be specified using 'dFunction { BASIS-FUNCTION-TYPE , BASIS-FUNCTION-TYPE }'. These derivates can be accessed using the special 'D1' and 'D2' operators (*note Fields::). See *note Types for FunctionSpace::, for the complete list of options and *note FunctionSpace examples::, for some examples. 5.5 'Jacobian': defining jacobian methods ========================================= Jacobian methods can be referred to in 'Formulation' and 'PostProcessing' objects to be used in the computation of integral terms and for changes of coordinates. They are based on 'Group' objects and define the geometrical transformations applied to the reference elements (i.e., lines, triangles, quadrangles, tetrahedra, prisms, hexahedra, etc.). Besides the classical lineic, surfacic and volume Jacobians, the 'Jacobian' object allows the construction of various transformation methods (e.g., infinite transformations for unbounded domains) thanks to dedicated jacobian methods. The syntax for the definition of Jacobian methods is: Jacobian { { < Append < EXPRESSION-CST >; > Name JACOBIAN-ID; Case { { Region GROUP-DEF | All; Jacobian JACOBIAN-TYPE < { EXPRESSION-CST-LIST } >; } ... } } ... } with JACOBIAN-ID: STRING JACOBIAN-TYPE: Vol | Sur | VolAxi | ETC Note: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive) permits to append an existing 'Jacobian' of the same 'Name' with additional 'Case's. 2. The default case of a 'Jacobian' object is defined by 'Region All' and must follow all the other cases. See *note Types for Jacobian::, for the complete list of options and *note Jacobian examples::, for some examples. 5.6 'Integration': defining integration methods =============================================== Various numerical or analytical integration methods can be referred to in 'Formulation' and 'PostProcessing' objects to be used in the computation of integral terms, each with a set of particular options (number of integration points for quadrature methods--which can be linked to an error criterion for adaptative methods, definition of transformations for singular integrations, etc.). Moreover, a choice can be made between several integration methods according to a criterion (e.g., on the proximity between the source and computation points in integral formulations). The syntax for the definition of integration methods is: Integration { { < Append < EXPRESSION-CST >; > Name INTEGRATION-ID; < Criterion EXPRESSION; > Case { < { Type INTEGRATION-TYPE; Case { { GeoElement ELEMENT-TYPE; NumberOfPoints EXPRESSION-CST } ... } } ... > < { Type Analytic; } ... > } } ... } with INTEGRATION-ID: STRING INTEGRATION-TYPE: Gauss | ETC ELEMENT-TYPE: Line | Triangle | Tetrahedron ETC Note: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive) permits to append an existing 'Integration' of the same 'Name' with additional 'Case's. See *note Types for Integration::, for the complete list of options and *note Integration examples::, for some examples. 5.7 'Formulation': building equations ===================================== The 'Formulation' tool permits to deal with volume, surface and line integrals with many kinds of densities to integrate, written in a form that is similar to their symbolic expressions (it uses the same EXPRESSION syntax as elsewhere in GetDP), which therefore permits to directly take into account various kinds of elementary matrices (e.g., with scalar or cross products, anisotropies, nonlinearities, time derivatives, various test functions, etc.). In case nonlinear physical characteristics are considered, arguments are used for associated functions. In that way, many formulations can be directly written in the data file, as they are written symbolically. Fields involved in each formulation are declared as belonging to beforehand defined function spaces. The uncoupling between formulations and function spaces allows to maintain a generality in both their definitions. A 'Formulation' is characterized by its type, the involved quantities (of local, global or integral type) and a list of equation terms. Global equations can also be considered, e.g., for the coupling with network relations. The syntax for the definition of formulations is: Formulation { { < Append < EXPRESSION-CST >; > Name FORMULATION-ID; Type FORMULATION-TYPE; Quantity { { Name QUANTITY-ID; Type QUANTITY-TYPE; NameOfSpace FUNCTION-SPACE-ID <{}> < [ SUB-SPACE-ID | GLOBAL-QUANTITY-ID ] >; < Symmetry EXPRESSION-CST; > < [ EXPRESSION ]; In GROUP-DEF; Jacobian JACOBIAN-ID; Integration INTEGRATION-ID; > < IndexOfSystem INTEGER; > } ... } Equation { < LOCAL-TERM-TYPE { < TERM-OP-TYPE > [ EXPRESSION, EXPRESSION ]; In GROUP-DEF; Jacobian JACOBIAN-ID; Integration INTEGRATION-ID; } > ... < GlobalTerm { < TERM-OP-TYPE > [ EXPRESSION, EXPRESSION ]; In GROUP-DEF; < SubType EQUATION-TERM-SUB-TYPE; > } > ... < GlobalEquation { Type Network; NameOfConstraint CONSTRAINT-ID; { Node EXPRESSION; Loop EXPRESSION; Equation EXPRESSION; In GROUP-DEF; } ... } > ... < AFFECTATION > ... < LOOP > ... } } ... < AFFECTATION > ... < LOOP > ... } with FORMULATION-ID: STRING | STRING ~ { EXPRESSION-CST } FORMULATION-TYPE: FemEquation | ETC LOCAL-TERM-TYPE: Integral | deRham EQUATION-TERM-SUB-TYPE: Self (default) | Mutual | SelfAndMutual QUANTITY-TYPE: Local | Global | Integral TERM-OP-TYPE: DtDof | DtDtDof | Eig | JacNL | ETC Note: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive) permits to append an existing 'Formulation' of the same 'Name' with additional 'Quantity''s and 'Equation's. 2. 'IndexOfSystem' permits to resolve ambiguous cases when several quantities belong to the same function space, but to different systems of equations. The INTEGER parameter then specifies the index in the list of an 'OriginSystem' command (*note Resolution::). 3. A 'GlobalTerm' defines a term to be assembled in an equation associated with a global quantity. This equation is a finite element equation if that global quantity is linked with local quantities. The optional associated 'SubType' defines either self (default) or mutual contributions, or both. Mutual contributions need piecewise functions defined on pairs or regions. 4. A 'GlobalEquation' defines a global equation to be assembled in the matrix of the system. See *note Types for Formulation::, for the complete list of options and *note Formulation examples::, for some examples. 5.8 'Resolution': solving systems of equations ============================================== The operations available in a 'Resolution' include: the generation of a linear system, its solving with various kinds of linear solvers, the saving of the solution or its transfer to another system, the definition of various time stepping methods, the construction of iterative loops for nonlinear problems (Newton-Raphson and fixed point methods), etc. Multi-harmonic resolutions, coupled problems (e.g., magneto-thermal) or linked problems (e.g., pre-computations of source fields) are thus easily defined in GetDP. The 'Resolution' object is characterized by a list of systems to build and their associated formulations, using time or frequency domain, and a list of elementary operations: Resolution { { < Append < EXPRESSION-CST >; > Name RESOLUTION-ID; < Hidden EXPRESSION-CST; > System { { Name SYSTEM-ID; NameOfFormulation FORMULATION-LIST; < Type SYSTEM-TYPE; > < Frequency EXPRESSION-CST-LIST-ITEM | Frequency { EXPRESSION-CST-LIST }; > < DestinationSystem SYSTEM-ID; > < OriginSystem SYSTEM-ID; | OriginSystem { SYSTEM-ID <,...> }; > < NameOfMesh EXPRESSION-CHAR > < Solver EXPRESSION-CHAR > < LOOP > } ... < LOOP > ... } Operation { < RESOLUTION-OP; > ... < LOOP > ... } } ... < AFFECTATION > ... < LOOP > ... } with RESOLUTION-ID: SYSTEM-ID: STRING | STRING ~ { EXPRESSION-CST } FORMULATION-LIST: FORMULATION-ID <{}> | { FORMULATION-ID <{}> <,...> } SYSTEM-TYPE: Real | Complex RESOLUTION-OP: Generate[SYSTEM-ID] | Solve[SYSTEM-ID] | ETC Notes: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive) permits to append an existing 'Resolution' of the same 'Name' with additional 'System's and 'Operation's. 2. The default type for a system of equations is 'Real'. A frequency domain analysis is defined through the definition of one or several frequencies ('Frequency EXPRESSION-CST-LIST-ITEM | Frequency { EXPRESSION-CST-LIST }'). Complex systems of equations with no predefined list of frequencies (e.g., in modal analyses) can be explicitely defined with 'Type Complex'. 3. 'NameOfMesh' permits to explicitely specify the mesh to be used for the construction of the system of equations. 4. 'Solver' permits to explicitely specify the name of the solver parameter file to use for the solving of the system of equations. This is ony valid if GetDP was compiled against the default solver library (it is the case if you downloaded a pre-compiled copy of GetDP from the internet). 5. 'DestinationSystem' permits to specify the destination system of a 'TransferSolution' operation (*note Types for Resolution::). 6. 'OriginSystem' permits to specify the systems from which ambiguous quantity definitions can be solved (*note Formulation::). See *note Types for Resolution::, for the complete list of options and *note Resolution examples::, for some examples. 5.9 'PostProcessing': exploiting computational results ====================================================== The 'PostProcessing' object is based on the quantities defined in a 'Formulation' and permits the construction (thanks to the EXPRESSION syntax) of any useful piecewise defined quantity of interest: PostProcessing { { < Append < EXPRESSION-CST >; > Name POST-PROCESSING-ID; NameOfFormulation FORMULATION-ID <{}>; < NameOfSystem SYSTEM-ID; > Quantity { { < Append < EXPRESSION-CST >; > Name POST-QUANTITY-ID; Value { POST-VALUE ... } } ... < LOOP > ... } } ... < AFFECTATION > ... < LOOP > ... } with POST-PROCESSING-ID: POST-QUANTITY-ID: STRING | STRING ~ { EXPRESSION-CST } POST-VALUE: Local { LOCAL-VALUE } | Integral { INTEGRAL-VALUE } LOCAL-VALUE: [ EXPRESSION ]; In GROUP-DEF; Jacobian JACOBIAN-ID; INTEGRAL-VALUE: [ EXPRESSION ]; In GROUP-DEF; Integration INTEGRATION-ID; Jacobian JACOBIAN-ID; Notes: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive; its omission fixes it to a top value) permits to append an existing 'PostProcessing' of the same 'Name' with additional 'Value's, or an existing 'Quantity' of the same 'Name' with additional 'Quantity''s. If the 'Append' 'PostProcessing' level is 2, the 'Append' 'Quantity' level is automatically 1 if omitted. Fixing the 'Append' 'Quantity' level to -N suppresses the N lastly defined 'Quantity''s before appending. 2. The quantity defined with INTEGRAL-VALUE is piecewise defined over the elements of the mesh of GROUP-DEF, and takes, in each element, the value of the integration of EXPRESSION over this element. The global integral of EXPRESSION over a whole region (being either GROUP-DEF or a subset of GROUP-DEF) has to be defined in the 'PostOperation' with the 'POST-QUANTITY-ID[GROUP-DEF]' command (*note PostOperation::). 3. If 'NameOfSystem SYSTEM-ID' is not given, the system is automatically selected as the one to which the first quantity listed in the 'Quantity' field of FORMULATION-ID is associated. See *note Types for PostProcessing::, for the complete list of options and *note PostProcessing examples::, for some examples. 5.10 'PostOperation': exporting results ======================================= The 'PostOperation' is the bridge between results obtained with GetDP and the external world. It defines several elementary operations on 'PostProcessing' quantities (e.g., plot on a region, section on a user-defined plane, etc.), and outputs the results in several file formats. PostOperation { { < Append < EXPRESSION-CST >; > Name POST-OPERATION-ID; NameOfPostProcessing POST-PROCESSING-ID; < Hidden EXPRESSION-CST; > < Format POST-OPERATION-FMT; > < TimeValue EXPRESSION-CST-LIST; > < TimeImagValue EXPRESSION-CST-LIST; > < LastTimeStepOnly < EXPRESSION-CST >; > < OverrideTimeStepValue EXPRESSION-CST; > < NoMesh EXPRESSION-CST; > < AppendToExistingFile EXPRESSION-CST; > < ResampleTime[EXPRESSION-CST, EXPRESSION-CST, EXPRESSION-CST]; > < AppendTimeStepToFileName < EXPRESSION-CST >; > Operation { < POST-OPERATION-OP; > ... } } ... < AFFECTATION > ... < LOOP > ... } | PostOperation < (Append < EXPRESSION-CST >) > POST-OPERATION-ID UsingPost POST-PROCESSING-ID { < POST-OPERATION-OP; > ... } ... with POST-OPERATION-ID: STRING | STRING ~ { EXPRESSION-CST } POST-OPERATION-OP: Print[ POST-QUANTITY-ID <[GROUP-DEF]>, PRINT-SUPPORT <,PRINT-OPTION> ... ] | Print[ EXPRESSION-LIST, Format "STRING" <,PRINT-OPTION> ... ] | PrintGroup[ GROUP-ID, PRINT-SUPPORT <,PRINT-OPTION> ... ] | Echo[ "STRING" <,PRINT-OPTION> ... ] | CreateDir [ "STRING" ] | DeleteFile [ "STRING" ] | SendMergeFileRequest[ EXPRESSION-CHAR ] | < LOOP > ... ETC PRINT-SUPPORT: OnElementsOf GROUP-DEF | OnRegion GROUP-DEF | OnGlobal | ETC PRINT-OPTION: File EXPRESSION-CHAR | Format POST-OPERATION-FMT | ETC POST-OPERATION-FMT: Table | TimeTable | ETC Notes: 1. The optional 'Append < EXPRESSION-CST >' (when the optional level EXPRESSION-CST is strictly positive) permits to append an existing 'PostOperation' of the same 'Name' with additional 'Operation's. 2. Both 'PostOperation' syntaxes are equivalent. The first one conforms to the overall interface, but the second one is more concise. 3. The format POST-OPERATION-FMT defined outside the 'Operation' field is applied to all the post-processing operations, unless other formats are explicitly given in these operations with the 'Format' option (*note Types for PostOperation::). The default format is 'Gmsh'. 4. The 'ResampleTime' option allows equidistant resampling of the time steps by a spline interpolation. The parameters are: start time, stop time, time step. 5. The optional argument '[GROUP-DEF]' of the POST-QUANTITY-ID can only be used when this quantity has been defined as an INTEGRAL-VALUE (*note PostProcessing::). In this case, the sum of all elementary integrals is performed over the region GROUP-DEF. See *note Types for PostOperation::, for the complete list of options and *note PostOperation examples::, for some examples. 6 Types for objects ******************* This chapter presents the complete list of choices associated with metasyntactic variables introduced for the ten GetDP objects. 6.1 Types for 'Group' ===================== Types in GROUP-TYPE [ R1 <, GROUP-SUB-TYPE R2 <, GROUP-SUB-TYPE-2 R3 > > ] 'GROUP-TYPE < GROUP-SUB-TYPE < GROUP-SUB-TYPE-2 > >': 'Region' Regions in R1. 'Global' Regions in R1 (variant of 'Region' used with global 'BasisFunction's 'BF_Global' and 'BF_dGlobal'). 'NodesOf' Nodes of elements of R1 < 'Not': but not those of R2 >. 'EdgesOf' Edges of elements of R1 < 'Not': but not those of R2 >. 'FacetsOf' Facets of elements of R1 < 'Not': but not those of R2 >. 'VolumesOf' Volumes of elements of R1 < 'Not': but not those of R2 >. 'ElementsOf' Elements of regions in R1 < 'OnOneSideOf': only elements on one side of R2 (non-automatic, i.e., both sides if both in R1) > | < 'OnPositiveSideOf': only elements on positive (normal) side of R2 < , 'Not': but not those touching only its skin R3 (mandatory for free skins for correct separation of side layers) > >. 'GroupsOfNodesOf' Groups of nodes of elements of R1 (a group is associated with each region). 'GroupsOfEdgesOf' Groups of edges of elements of R1 (a group is associated with each region). < 'InSupport': in a support R2 being a group of type 'ElementOf', i.e., containing elements >. 'GroupsOfEdgesOnNodesOf' Groups of edges incident to nodes of elements of R1 (a group is associated with each node). < 'Not': but not those of R2) >. 'GroupOfRegionsOf' Single group of elements of regions in R1 (with basis function BF_Region just one DOF is created for all elements of R1). 'EdgesOfTreeIn' Edges of a tree of edges of R1 < 'StartingOn': a complete tree is first built on R2 >. 'FacetsOfTreeIn' Facets of a tree of facets of R1 < 'StartingOn': a complete tree is first built on R2 >. 'DualNodesOf' Dual nodes of elements of R1. 'DualEdgesOf' Dual edges of elements of R1. 'DualFacetsOf' Dual facets of elements of R1. 'DualVolumesOf' Dual volumes of elements of R1. 6.2 Types for 'Function' ======================== 6.2.1 Math functions -------------------- The following functions are the equivalent of the functions of the C or C++ math library. Unless indicated otherwise, arguments to these functions can be real or complex valued when used in EXPRESSIONs. When used in constant expressions (EXPRESSION-CST, see *note Constants::), only real-valued arguments are accepted. MATH-FUNCTION-ID: 'Exp' '[EXPRESSION]' Exponential function: e^EXPRESSION. 'Log' '[EXPRESSION]' Natural logarithm: ln(EXPRESSION), EXPRESSION>0. 'Log10' '[EXPRESSION]' Base 10 logarithm: log10(EXPRESSION), EXPRESSION>0. 'Sqrt' '[EXPRESSION]' Square root, EXPRESSION>=0. 'Sin' '[EXPRESSION]' Sine of EXPRESSION. 'Asin' '[EXPRESSION]' Arc sine (inverse sine) of EXPRESSION in [-Pi/2,Pi/2], EXPRESSION in [-1,1] (real valued only). 'Cos' '[EXPRESSION]' Cosine of EXPRESSION. 'Acos' '[EXPRESSION]' Arc cosine (inverse cosine) of EXPRESSION in [0,Pi], EXPRESSION in [-1,1] (real valued only). 'Tan' '[EXPRESSION]' Tangent of EXPRESSION. 'Atan' '[EXPRESSION]' Arc tangent (inverse tangent) of EXPRESSION in [-Pi/2,Pi/2] (real valued only). 'Atan2' '[EXPRESSION,EXPRESSION]' Arc tangent (inverse tangent) of the first EXPRESSION divided by the second, in [-Pi,Pi] (real valued only). 'Sinh' '[EXPRESSION]' Hyperbolic sine of EXPRESSION. 'Cosh' '[EXPRESSION]' Hyperbolic cosine of EXPRESSION. 'Tanh' '[EXPRESSION]' Hyperbolic tangent of the real valued EXPRESSION. 'TanhC2' '[EXPRESSION]' Hyperbolic tangent of a complex valued EXPRESSION. 'Fabs' '[EXPRESSION]' Absolute value of EXPRESSION (real valued only). 'Abs' '[EXPRESSION]' Absolute value of EXPRESSION. 'Floor' '[EXPRESSION]' Rounds downwards to the nearest integer that is not greater than EXPRESSION (real valued only). 'Ceil' '[EXPRESSION]' Rounds upwards to the nearest integer that is not less than EXPRESSION (real valued only). 'Fmod' '[EXPRESSION,EXPRESSION]' Remainder of the division of the first EXPRESSION by the second, with the sign of the first (real valued only). 'Min' '[EXPRESSION,EXPRESSION]' Minimum of the two (scalar) expressions (real valued only). 'Max' '[EXPRESSION,EXPRESSION]' Maximum of the two (scalar) expressions (real valued only). 'Sign' '[EXPRESSION]' -1 for EXPRESSION less than zero and 1 otherwise (real valued only). 'Jn' '[EXPRESSION]' Returns the Bessel function of the first kind of order given by the first EXPRESSION for the value of the second EXPRESSION (real valued only). 'dJn' '[EXPRESSION]' Returns the derivative of the Bessel function of the first kind of order given by the first EXPRESSION for the value of the second EXPRESSION (real valued only). 'Yn' '[EXPRESSION]' Returns the Bessel function of the second kind of order given by the first EXPRESSION for the value of the second EXPRESSION (real valued only). 'dYn' '[EXPRESSION]' Returns the derivative of the Bessel function of the second kind of order given by the first EXPRESSION for the value of the second EXPRESSION (real valued only). 6.2.2 Extended math functions ----------------------------- EXTENDED-MATH-FUNCTION-ID: 'Cross' '[EXPRESSION,EXPRESSION]' Cross product of the two arguments; EXPRESSION must be a vector. 'Hypot' '[EXPRESSION,EXPRESSION]' Square root of the sum of the squares of its arguments. 'Norm' '[EXPRESSION]' Absolute value if EXPRESSION is a scalar; euclidian norm if EXPRESSION is a vector. 'SquNorm' '[EXPRESSION]' Square norm: 'Norm[EXPRESSION]^2'. 'Unit' '[EXPRESSION]' Normalization: 'EXPRESSION/Norm[EXPRESSION]'. Returns 0 if the norm is smaller than 1.e-30. 'Transpose' '[EXPRESSION]' Transposition; EXPRESSION must be a tensor. 'Inv' '[EXPRESSION]' Inverse of the tensor EXPRESSION. 'Det' '[EXPRESSION]' Determinant of the tensor EXPRESSION. 'Rotate' '[EXPRESSION,EXPRESSION,EXPRESSION,EXPRESSION]' Rotation of a vector or tensor given by the first EXPRESSION by the angles in radians given by the last three EXPRESSION values around the x-, y- and z-axis. 'TTrace' '[EXPRESSION]' Trace; EXPRESSION must be a tensor. 'Cos_wt_p' '[]{EXPRESSION-CST,EXPRESSION-CST}' The first parameter represents the angular frequency and the second represents the phase. If the type of the current system is 'Real', 'F_Cos_wt_p[]{w,p}' is identical to 'Cos[w*$Time+p]'. If the type of the current system is 'Complex', it is identical to 'Complex[Cos[p],Sin[p]]'. 'Sin_wt_p' '[]{EXPRESSION-CST,EXPRESSION-CST}' The first parameter represents the angular frequency and the second represents the phase. If the type of the current system is 'Real', 'F_Sin_wt_p[]{w,p}' is identical to 'Sin[w*$Time+p]'. If the type of the current system is 'Complex', it is identical to 'Complex[Sin[p],-Cos[p]]'. 'Period' '[EXPRESSION]{EXPRESSION-CST}' 'Fmod[EXPRESSION,EXPRESSION-CST]' '+' '(EXPRESSION<0 ? EXPRESSION-CST : 0)'; the result is always in [0,EXPRESSION-CST[. 'Interval' '[EXPRESSION,EXPRESSION,EXPRESSION]{EXPRESSION-CST, EXPRESSION-CST,EXPRESSION-CST}' Not documented yet. 6.2.3 Green functions --------------------- The Green functions are only used in integral quantities (*note Formulation::). The first parameter represents the dimension of the problem: * '1D': 'r = Fabs[$X-$XS]' * '2D': 'r = Sqrt[($X-$XS)^2+($Y-$YS)^2]' * '3D': 'r = Sqrt[($X-$XS)^2+($Y-$YS)^2+($Z-$ZS)^2]' The triplets of values given in the definitions below correspond to the '1D', '2D' and '3D' cases. GREEN-FUNCTION-ID: 'Laplace' '[]{EXPRESSION-CST}' 'r/2', '1/(2*Pi)*ln(1/r)', '1/(4*Pi*r)'. 'GradLaplace' '[]{EXPRESSION-CST}' Gradient of 'Laplace' relative to the destination point ('$X', '$Y', '$Z'). 'Helmholtz' '[]{EXPRESSION-CST, EXPRESSION-CST}' 'exp(j*k0*r)/(4*Pi*r)', where 'k0' is given by the second parameter. 'GradHelmholtz' '[]{EXPRESSION-CST, EXPRESSION-CST}' Gradient of 'Helmholtz' relative to the destination point ('$X', '$Y', '$Z'). 6.2.4 Type manipulation functions --------------------------------- TYPE-FUNCTION-ID: 'Complex' '[EXPRESSION-LIST]' Creates a (multi-harmonic) complex expression from an number of real-valued expressions. The number of expressions in EXPRESSION-LIST must be even. 'Complex_MH' '[EXPRESSION-LIST]{EXPRESSION-CST-LIST}' Not documented yet. 'Re' '[EXPRESSION]' Takes the real part of a complex-valued expression. 'Im' '[EXPRESSION]' Takes the imaginary part of a complex-valued expression. 'Conj' '[EXPRESSION]' Computes the conjugate of a complex-valued expression. 'Cart2Pol' '[EXPRESSION]' Converts the cartesian form (reale, imaginary) of a complex-valued expression into polar form (amplitude, phase [radians]). 'Vector' '[EXPRESSION,EXPRESSION,EXPRESSION]' Creates a vector from 3 scalars. 'Tensor' '[EXPRESSION,EXPRESSION,EXPRESSION,EXPRESSION,EXPRESSION,EXPRESSION,' 'EXPRESSION,EXPRESSION,EXPRESSION]' Creates a second-rank tensor of order 3 from 9 scalars, by row: [ scalar0 scalar1 scalar2 ] [ CompXX CompXY CompXZ ] T = [ scalar3 scalar4 scalar5 ] = [ CompYX CompYY CompYZ ] [ scalar6 scalar7 scalar8 ] [ CompZX CompZY CompZZ ] 'TensorV' '[EXPRESSION,EXPRESSION,EXPRESSION]' Creates a second-rank tensor of order 3 from 3 row vectors: [ vector0 ] T = [ vector1 ] [ vector2 ] 'TensorSym' '[EXPRESSION,EXPRESSION,EXPRESSION,EXPRESSION,EXPRESSION,EXPRESSION]' Creates a symmetrical second-rank tensor of order 3 from 6 scalars. 'TensorDiag' '[EXPRESSION,EXPRESSION,EXPRESSION]' Creates a diagonal second-rank tensor of order 3 from 3 scalars. 'SquDyadicProduct' '[EXPRESSION]' Dyadic product of the vector given by EXPRESSION with itself. 'CompX' '[EXPRESSION]' Gets the X component of a vector. 'CompY' '[EXPRESSION]' Gets the Y component of a vector. 'CompZ' '[EXPRESSION]' Gets the Z component of a vector. 'CompXX' '[EXPRESSION]' Gets the XX component of a tensor. 'CompXY' '[EXPRESSION]' Gets the XY component of a tensor. 'CompXZ' '[EXPRESSION]' Gets the XZ component of a tensor. 'CompYX' '[EXPRESSION]' Gets the YX component of a tensor. 'CompYY' '[EXPRESSION]' Gets the YY component of a tensor. 'CompYZ' '[EXPRESSION]' Gets the YZ component of a tensor. 'CompZX' '[EXPRESSION]' Gets the ZX component of a tensor. 'CompZY' '[EXPRESSION]' Gets the ZY component of a tensor. 'CompZZ' '[EXPRESSION]' Gets the ZZ component of a tensor. 'Cart2Sph' '[EXPRESSION]' Gets the tensor for transformation of vector from cartesian to spherical coordinates. 'Cart2Cyl' '[EXPRESSION]' Gets the tensor for transformation of vector from cartesian to cylindric coordinates. E.g. to convert a vector with (x,y,z)-components to one with (radial, tangential, axial)-components: Cart2Cyl[XYZ[]] * vector 'UnitVectorX' '[]' Creates a unit vector in x-direction. 'UnitVectorY' '[]' Creates a unit vector in y-direction. 'UnitVectorZ' '[]' Creates a unit vector in z-direction. 6.2.5 Coordinate functions -------------------------- COORD-FUNCTION-ID: 'X' '[]' Gets the X coordinate. 'Y' '[]' Gets the Y coordinate. 'Z' '[]' Gets the Z coordinate. 'XYZ' '[]' Gets X, Y and Z in a vector. 6.2.6 Miscellaneous functions ----------------------------- MISC-FUNCTION-ID: 'Printf' '[EXPRESSION]' Prints the value of EXPRESSION when evaluated. ('MPI_Printf' can be use instead, to print the message for all MPI ranks.) 'Rand' '[EXPRESSION]' Returns a pseudo-random number in [0, EXPRESSION]. 'Normal' '[]' Computes the normal to the element. 'NormalSource' '[]' Computes the normal to the source element (only valid in a quantity of Integral type). 'Tangent' '[]' Computes the tangent to the element (only valid for line elements). 'TangentSource' '[]' Computes the tangent to the source element (only valid in a quantity of Integral type and only for line elements). 'ElementVol' '[]' Computes the element's volume. 'SurfaceArea' '[]{EXPRESSION-CST-LIST}' Computes the area of the physical surfaces in EXPRESSION-CST-LIST or of the actual surface if EXPRESSION-CST-LIST is empty. 'GetVolume' '[]' Computes the volume of the actual physical group. 'CompElementNum' '[]' Returns 0 if the current element and the current source element are identical. 'GetNumElements' '[]{EXPRESSION-CST-LIST}' Counts the elements of physical numbers in EXPRESSION-CST-LIST or of the actual region if EXPRESSION-CST-LIST is empty. 'ElementNum' '[]' Returns the tag (number) of the current element. 'QuadraturePointIndex' '[]' Returns the index of the current quadrature point. 'AtIndex' '[EXPRESSION]{EXPRESSION-CST-LIST}' Returns the i-th entry of EXPRESSION-CST-LIST. This can be used to get an element in a list, using an index that is computed at runtime. 'InterpolationLinear' '[EXPRESSION]{EXPRESSION-CST-LIST}' Linear interpolation of points. The number of constant expressions in EXPRESSION-CST-LIST must be even. 'dInterpolationLinear' '[EXPRESSION]{EXPRESSION-CST-LIST}' Derivative of linear interpolation of points. The number of constant expressions in EXPRESSION-CST-LIST must be even. 'InterpolationBilinear' '[EXPRESSION,EXPRESSION]{EXPRESSION-CST-LIST}' Bilinear interpolation of a table based on two variables. 'dInterpolationBilinear' '[EXPRESSION,EXPRESSION]{EXPRESSION-CST-LIST}' Derivative of bilinear interpolation of a table based on two variables. The result is a vector. 'InterpolationAkima' '[EXPRESSION]{EXPRESSION-CST-LIST}' Akima interpolation of points. The number of constant expressions in EXPRESSION-CST-LIST must be even. 'dInterpolationAkima' '[EXPRESSION]{EXPRESSION-CST-LIST}' Derivative of Akima interpolation of points. The number of constant expressions in EXPRESSION-CST-LIST must be even. 'Order' '[QUANTITY]' Returns the interpolation order of the QUANTITY. 'Field' '[EXPRESSION]' Evaluate the last one of the fields ("views") loaded with 'GmshRead' (*note Types for Resolution::), at the point EXPRESSION. Common usage is thus 'Field[XYZ[]]'. 'Field' '[EXPRESSION]{EXPRESSION-CST-LIST}' Idem, but evaluate all the fields corresponding to the tags in the list, and sum all the values. A field having no value at the given position does not produce an error: its contribution to the sum is simply zero. 'ScalarField' '[EXPRESSION]{EXPRESSION-CST-LIST}' Idem, but consider only real-valued scalar fields. A second optional argument is the value of the time step. A third optional argument is a boolean flag to indicate that the interpolation should be performed (if possible) in the same element as the current element. 'VectorField' '[EXPRESSION]{EXPRESSION-CST-LIST}' Idem, but consider only real-valued vector fields. Optional arguments are treated in the same way as for 'ScalarField'. 'TensorField' '[EXPRESSION]{EXPRESSION-CST-LIST}' Idem, but consider only real-valued tensor fields. Optional arguments are treated in the same way as for 'ScalarField'. 'ComplexScalarField' '[EXPRESSION]{EXPRESSION-CST-LIST}' Idem, but consider only complex-valued scalar fields. Optional arguments are treated in the same way as for 'ScalarField'. 'ComplexVectorField' '[EXPRESSION]{EXPRESSION-CST-LIST}' Idem, but consider only complex-valued vector fields. Optional arguments are treated in the same way as for 'ScalarField'. 'ComplexTensorField' '[EXPRESSION]{EXPRESSION-CST-LIST}' Idem, but consider only complex-valued tensor fields. Optional arguments are treated in the same way as for 'ScalarField'. 'Distance' '[EXPRESSION]{EXPRESSION-CST}' Evaluate the distance between the point (whose x, y, z coordinates are given as a vector argument) and a vector valued view, interpreted as a displacement field (i.e. compute the minimal distance between the point and the deformed mesh in the view). 'GetCpuTime' '[]' Returns current CPU time, in seconds (total amount of time spent executing in user mode since GetDP was started). 'GetWallClockTime' '[]' Returns the current wall clock time, in seconds (total wall clock time since GetDP was started). 'GetMemory' '[]' Returns the current memory usage, in megabytes (maximum resident set size). 'SetNumberRunTime' '[EXPRESSION]{CHAR-EXPRESSION}' Sets the CHAR-EXPRESSION ONELAB variable at run-time to EXPRESSION. 'SetNumberRunTimeWithChoices' '[EXPRESSION]{CHAR-EXPRESSION}' Same as 'SetNumberRunTime', but adds the value to the choices of the ONELAB variable (i.e. in the same way as 'SendToServer' in 'PostOperation', which are used for plotting the history of the variable). 'GetNumberRunTime' '[ ]{CHAR-EXPRESSION}' Gets the value of the CHAR-EXPRESSION ONELAB variable at run-time. If the optional EXPRESSION is provided, it is used as a default value if ONELAB is not available. 'SetVariable' '[ EXPRESSION <,...> ]{ $VARIABLE-ID }' Sets the value of the runtime variable '$VARIABLE-ID' to the value of the first EXPRESSION, and returns this value. If optional EXPRESSIONs are provided, they are appended to the variable name, separated by '_'. 'GetVariable' '[ <,...> ]{ $VARIABLE-ID }' Gets the value of the runtime variable '$VARIABLE-ID'. If the optional EXPRESSIONs are provided, they are appended to the variable name, separated by '_'. 'ValueFromIndex' '[ ]{ EXPRESSION-CST-LIST }' Treats EXPRESSION-CST-LIST as a map of (ENTITY, VALUE) pairs. Useful to specify nodal or element-wise constraints, where ENTITY is the node (mesh vertex) or element number (tag). 'VectorFromIndex' '[ ]{ EXPRESSION-CST-LIST }' Same 'ValueFromIndex', but with 3 scalar values per ENTITY. 'ValueFromTable' '[ EXPRESSION ]{ CHAR-EXPRESSION }' Accesses the map CHAR-EXPRESSION created by a 'NodeTable' or 'ElementTable' 'PostOperation'. If the map is not available (e.g. in pre-processing), or if the entity is not found in the map, use EXPRESSION as default value. Useful to specify nodal or element-wise constraints, where ENTITY is the node (mesh vertex) or element number (tag). 6.3 Types for 'Constraint' ========================== CONSTRAINT-TYPE: 'Assign' To assign a value (e.g., for boundary condition). 'Init' To give an initial value (e.g., initial value in a time domain analysis). If two values are provided (with 'Value [ EXPRESSION, EXPRESSION ]'), the first value can be used using the 'InitSolution1' operation. This is mainly useful for the Newmark time-stepping scheme. 'AssignFromResolution' To assign a value to be computed by a pre-resolution. 'InitFromResolution' To give an initial value to be computed by a pre-resolution. 'Network' To describe the node connections of branches in a network. 'Link' To define links between degrees of freedom in the constrained region with degrees of freedom in a "reference" region, with some coefficient. For example, to link the degrees of freedom in the contrained region 'Left' with the degrees of freedom in the reference region 'Right', located Pi units to the right of the region 'Left' along the X-axis, with the coeficient '-1', one could write: { Name periodic; Case { { Region Left; Type Link ; RegionRef Right; Coefficient -1; Function Vector[X[]+Pi, Y[], Z[]] ; < FunctionRef XYZ[]; > } } } In this example, 'Function' defines the mapping that translates the geometrical elements in the region 'Left' by Pi units along the X-axis, so that they correspond with the elements in the reference region 'Right'. For this mapping to work, the meshes of 'Left' and 'Right' must be identical. (The optional 'FunctionRef' function allows to transform the reference region, useful e.g. to avoid generating overlapping meshes for rotational links.) 'LinkCplx' To define complex-valued links between degrees of freedom. The syntax is the same as for constraints of type 'Link', but 'Coeficient' can be complex. 6.4 Types for 'FunctionSpace' ============================= FUNCTION-SPACE-TYPE: 'Form0' 0-form, i.e., scalar field of potential type. 'Form1' 1-form, i.e., curl-conform field (associated with a curl). 'Form2' 2-form, i.e., div-conform field (associated with a divergence). 'Form3' 3-form, i.e., scalar field of density type. 'Form1P' 1-form perpendicular to the Z=0 plane, i.e., perpendicular curl-conform field (associated with a curl). 'Form2P' 2-form in the Z=0 plane, i.e., parallel div-conform field (associated with a divergence). 'Scalar' Scalar field. 'Vector' Vector field. BASIS-FUNCTION-TYPE: 'BF_Node' Nodal function (on 'NodesOf', value 'Form0'). 'BF_Edge' Edge function (on 'EdgesOf', value 'Form1'). 'BF_Facet' Facet function (on 'FacetsOf', value 'Form2'). 'BF_Volume' Volume function (on 'VolumesOf', value 'Form3'). 'BF_GradNode' Gradient of nodal function (on 'NodesOf', value 'Form1'). 'BF_CurlEdge' Curl of edge function (on 'EdgesOf', value 'Form2'). 'BF_DivFacet' Divergence of facet function (on 'FacetsOf', value 'Form3'). 'BF_GroupOfNodes' Sum of nodal functions (on 'GroupsOfNodesOf', value 'Form0'). 'BF_GradGroupOfNodes' Gradient of sum of nodal functions (on 'GroupsOfNodesOf', value 'Form1'). 'BF_GroupOfEdges' Sum of edge functions (on 'GroupsOfEdgesOf', value 'Form1'). 'BF_CurlGroupOfEdges' Curl of sum of edge functions (on 'GroupsOfEdgesOf', value 'Form2'). 'BF_PerpendicularEdge' 1-form (0, 0, 'BF_Node') (on 'NodesOf', value 'Form1P'). 'BF_CurlPerpendicularEdge' Curl of 1-form (0, 0, 'BF_Node') (on 'NodesOf', value 'Form2P'). 'BF_GroupOfPerpendicularEdge' Sum of 1-forms (0, 0, 'BF_Node') (on 'NodesOf', value 'Form1P'). 'BF_CurlGroupOfPerpendicularEdge' Curl of sum of 1-forms (0, 0, 'BF_Node') (on 'NodesOf', value 'Form2P'). 'BF_PerpendicularFacet' 2-form (90 degree rotation of 'BF_Edge') (on 'EdgesOf', value 'Form2P'). 'BF_DivPerpendicularFacet' Div of 2-form (90 degree rotation of 'BF_Edge') (on 'EdgesOf', value 'Form3'). 'BF_Region' Unit value 1 (on 'Region' or 'GroupOfRegionsOf', value 'Scalar'). 'BF_RegionX' Unit vector (1, 0, 0) (on 'Region', value 'Vector'). 'BF_RegionY' Unit vector (0, 1, 0) (on 'Region', value 'Vector'). 'BF_RegionZ' Unit vector (0, 0, 1) (on 'Region', value 'Vector'). 'BF_Global' Global pre-computed quantity (on 'Global', value depends on parameters). 'BF_dGlobal' Exterior derivative of global pre-computed quantity (on 'Global', value depends on parameters). 'BF_NodeX' Vector ('BF_Node', 0, 0) (on 'NodesOf', value 'Vector'). 'BF_NodeY' Vector (0, 'BF_Node', 0) (on 'NodesOf', value 'Vector'). 'BF_NodeZ' Vector (0, 0, 'BF_Node') (on 'NodesOf', value 'Vector'). 'BF_Zero' Zero value 0 (on all regions, value 'Scalar'). 'BF_One' Unit value 1 (on all regions, value 'Scalar'). GLOBAL-QUANTITY-TYPE: 'AliasOf' Another name for a name of coefficient of basis function. 'AssociatedWith' A global quantity associated with a name of coefficient of basis function, and therefore with this basis function. 6.5 Types for 'Jacobian' ======================== JACOBIAN-TYPE: 'Vol' Volume Jacobian, for N-D regions in N-D geometries, N = 1, 2 or 3. 'Sur' Surface Jacobian, for (N-1)-D regions in N-D geometries, N = 1, 2 or 3. 'Lin' Line Jacobian, for (N-2)-D regions in N-D geometries, N = 2 or 3. 'VolAxi' Axisymmetrical volume Jacobian (1st type: r), for 2-D regions in axisymmetrical geometries. 'SurAxi' Axisymmetrical surface Jacobian (1st type: r), for 1-D regions in axisymmetrical geometries. 'VolAxiSqu' Axisymmetrical volume Jacobian (2nd type: r^2), for 2-D regions in axisymmetrical geometries. 'VolSphShell' Volume Jacobian with spherical shell transformation, for N-D regions in N-D geometries, N = 2 or 3. Parameters: RADIUS-INTERNAL, RADIUS-EXTERNAL <, CENTER-X, CENTER-Y, CENTER-Z, POWER, 1/INFINITY >. 'VolCylShell' Volume Jacobian with cylindrical shell transformation, for N-D regions in N-D geometries, N = 2 or 3. For N=2, 'VolCylShell' is identical to 'VolSphShell'. For N=3, the axis of the cylinder is supposed to be along the Z axis. Parameters: RADIUS-INTERNAL, RADIUS-EXTERNAL <, CENTER-X, CENTER-Y, CENTER-Z, POWER, 1/INFINITY >. 'VolAxiSphShell' Same as 'VolAxi', but with spherical shell transformation. Parameters: RADIUS-INTERNAL, RADIUS-EXTERNAL <, CENTER-X, CENTER-Y, CENTER-Z, POWER, 1/INFINITY >. 'VolAxiSquSphShell' Same as 'VolAxiSqu', but with spherical shell transformation. Parameters: RADIUS-INTERNAL, RADIUS-EXTERNAL <, CENTER-X, CENTER-Y, CENTER-Z, POWER, 1/INFINITY >. 'VolRectShell' Volume Jacobian with rectangular shell transformation, for N-D regions in N-D geometries, N = 2 or 3. Parameters: RADIUS-INTERNAL, RADIUS-EXTERNAL <, DIRECTION, CENTER-X, CENTER-Y, CENTER-Z, POWER, 1/INFINITY >. 'VolAxiRectShell' Same as 'VolAxi', but with rectangular shell transformation. Parameters: RADIUS-INTERNAL, RADIUS-EXTERNAL <, DIRECTION, CENTER-X, CENTER-Y, CENTER-Z, POWER, 1/INFINITY >. 'VolAxiSquRectShell' Same as 'VolAxiSqu', but with rectangular shell transformation. Parameters: RADIUS-INTERNAL, RADIUS-EXTERNAL <, DIRECTION, CENTER-X, CENTER-Y, CENTER-Z, POWER, 1/INFINITY >. 6.6 Types for 'Integration' =========================== INTEGRATION-TYPE: 'Gauss' Numerical Gauss integration. 'GaussLegendre' Numerical Gauss integration obtained by application of a multiplicative rule on the one-dimensional Gauss integration. ELEMENT-TYPE: 'Line' Line (2 nodes, 1 edge, 1 volume) (#1). 'Triangle' Triangle (3 nodes, 3 edges, 1 facet, 1 volume) (#2). 'Quadrangle' Quadrangle (4 nodes, 4 edges, 1 facet, 1 volume) (#3). 'Tetrahedron' Tetrahedron (4 nodes, 6 edges, 4 facets, 1 volume) (#4). 'Hexahedron' Hexahedron (8 nodes, 12 edges, 6 facets, 1 volume) (#5). 'Prism' Prism (6 nodes, 9 edges, 5 facets, 1 volume) (#6). 'Pyramid' Pyramid (5 nodes, 8 edges, 5 facets, 1 volume) (#7). 'Point' Point (1 node) (#15). Note: 1. N in (#N) is the type number of the element (*note Input file format::). 6.7 Types for 'Formulation' =========================== FORMULATION-TYPE: 'FemEquation' Finite element method formulation (all methods of moments, integral methods). LOCAL-TERM-TYPE: 'Integral' Integral of Galerkin or Petrov-Galerkin type. 'deRham' deRham projection (collocation). QUANTITY-TYPE: 'Local' Local quantity defining a field in a function space. In case a subspace is considered, its identifier has to be given between the brackets following the 'NameOfSpace FUNCTION-SPACE-ID'. 'Global' Global quantity defining a global quantity from a function space. The identifier of this quantity has to be given between the brackets following the 'NameOfSpace FUNCTION-SPACE-ID'. 'Integral' Integral quantity obtained by the integration of a 'LocalQuantity' before its use in an 'Equation' term. TERM-OP-TYPE: 'Dt' Time derivative applied to the whole term of the equation. (Not implemented yet.) 'DtDof' Time derivative applied only to the 'Dof{}' term of the equation. 'DtDt' Time derivative of 2nd order applied to the whole term of the equation. (Not implemented yet.) 'DtDtDof' Time derivative of 2nd order applied only to the 'Dof{}' term of the equation. 'Eig' The term is multiplied by (a certain function of) the eigenvalue. This is to be used with the 'GenerateSeparate' and 'EigenSolve' 'Resolution' operations. An optional 'Order EXPRESSION;' or 'Rational EXPRESSION;' statement can be added in the term to specify the eigenvalue function. Full documentation of this feature is not available yet. 'JacNL' Nonlinear part of the Jacobian matrix (tangent stiffness matrix) to be assembled for nonlinear analysis. 'DtDofJacNL' Nonlinear part of the Jacobian matrix for the first order time derivative (tangent mass matrix) to be assembled for nonlinear analysis. 'NeverDt' No time scheme applied to the term (e.g., Theta is always 1 even if a theta scheme is applied). 6.8 Types for 'Resolution' ========================== RESOLUTION-OP: 'Generate' '[SYSTEM-ID]' Generate the system of equations SYSTEM-ID. 'Solve' '[SYSTEM-ID]' Solve the system of equations SYSTEM-ID. 'SolveAgain' '[SYSTEM-ID]' Save as 'Solve', but reuses the preconditionner when called multiple times. 'SetGlobalSolverOptions' '[CHAR-EXPRESSION]' Set global PETSc solver options (with the same syntax as PETSc options specified on the command line, e.g. '"-ksp_type gmres -pc_type ilu"'). 'GenerateJac' '[SYSTEM-ID]' Generate the system of equations SYSTEM-ID using a jacobian matrix (of which the unknowns are corrections DX of the current solution X). 'SolveJac' '[SYSTEM-ID]' Solve the system of equations SYSTEM-ID using a jacobian matrix (of which the unknowns are corrections DX of the current solution X). Then, Increment the solution (X=X+DX) and compute the relative error DX/X. 'GenerateSeparate' '[SYSTEM-ID]' Generate matrices separately for 'DtDtDof', 'DtDof' and 'NoDt' terms in SYSTEM-ID. The separate matrices can be used with the 'Update' operation (for efficient time domain analysis of linear PDEs with constant coefficients), or with the 'EigenSolve' operation (for solving generalized eigenvalue problems). 'GenerateOnly' '[SYSTEM-ID, EXPRESSION-CST-LIST]' Not documented yet. 'GenerateOnlyJac' '[SYSTEM-ID, EXPRESSION-CST-LIST]' Not documented yet. 'GenerateGroup' Not documented yet. 'GenerateRightHandSideGroup' Not documented yet. 'Update' '[SYSTEM-ID]' Update the system of equations SYSTEM-ID (built from sub-matrices generated separately with 'GenerateSeparate') with the 'TimeFunction'(s) provided in 'Assign' constraints. This assumes that the problem is linear, that the matrix coefficients are independent of time, and that all sources are imposed using 'Assign' constraints. 'Update' '[SYSTEM-ID, EXPRESSION]' Update the system of equations SYSTEM-ID (built from sub-matrices generated separately with 'GenerateSeparate') with EXPRESSION. This assumes that the problem is linear, that the matrix coefficients are independent of time, and that the right-hand-side of the linear system can simply be multiplied by EXPRESSION at each step. 'UpdateConstraint' '[SYSTEM-ID, GROUP-ID, CONSTRAINT-TYPE]' Recompute the constraint of type CONSTRAINT-TYPE acting on GROUP-ID during processing. 'GetResidual' '[SYSTEM-ID, $VARIABLE-ID]' Compute the residual 'r = b - A x' and store its L2 norm in the run-time variable $VARIABLE-ID. 'GetNormSolution | GetNormRightHandSide | GetNormResidual | GetNormIncrement' '[SYSTEM-ID, $VARIABLE-ID]' Compute the norm of the solution (resp. right-hand-side, residual or increment) and store its L2 norm in the run-time variable $VARIABLE-ID. 'SwapSolutionAndResidual' '[SYSTEM-ID]' Swap the solution 'x' and residual 'r' vectors. 'SwapSolutionAndRightHandSide' '[SYSTEM-ID]' Swap the solution 'x' and right-hand-side 'b' vectors. 'InitSolution' '[SYSTEM-ID]' Creates a new solution vector, adds it to the solution vector list for SYSTEM-ID, and initializes the solution. The values in the vector are initialized to the values given in a 'Constraint' of 'Init' type (if two values are given in 'Init', the second value is used). If no constraint is provided, the values are initialized to zero if the solution vector is the first in the solution list; otherwise the values are initialized using the previous solution in the list. 'InitSolution1' '[SYSTEM-ID]' Same as 'InitSolution', but uses the first value given in the 'Init' constraints. 'CreateSolution' '[SYSTEM-ID]' Creates a new solution vector, adds it to the solution vector list for SYSTEM-ID, and initializes the solution to zero. 'CreateSolution' '[SYSTEM-ID, EXPRESSION-CST]' Same as 'CreateSolution', but initialize the solution by copying the EXPRESSION-CSTth solution in the solution list. 'Apply' '[SYSTEM-ID]' 'x <- Ax' 'SetSolutionAsRightHandSide' '[SYSTEM-ID]' 'b <- x' 'SetRightHandSideAsSolution' '[SYSTEM-ID]' 'x <- b' 'Residual' '[SYSTEM-ID]' 'res <- b - Ax' 'CopySolution' '[SYSTEM-ID, CHAR-EXPRESSION | CONSTANT-ID() <, SendToServer CHAR-EXPRESSION > ]' Copy the current solution 'x' into a vector named CHAR-EXPRESSION or into a list named CONSTANT-ID. In the latter case, if 'SendToServer' is provided, copy the list to the ONELAB server as well. 'CopySolution' '[CHAR-EXPRESSION | CONSTANT-ID(), SYSTEM-ID]' Copy the vector named CHAR-EXPRESSION or the list named CONSTANT-ID into the current solution 'x'. 'CopyRightHandSide' '[SYSTEM-ID, CHAR-EXPRESSION | CONSTANT-ID() <, SendToServer CHAR-EXPRESSION > ]' Copy the current right-hand side 'b' into a vector named CHAR-EXPRESSION or into a list named CONSTANT-ID. In the latter case, if 'SendToServer' is provided, copy the list to the ONELAB server as well. 'CopyRightHandSide' '[CHAR-EXPRESSION | CONSTANT-ID(), SYSTEM-ID]' Copy the vector named CHAR-EXPRESSION or the list named CONSTANT-ID into the current right-hand-side 'b'. 'CopyResidual' '[SYSTEM-ID, CHAR-EXPRESSION | CONSTANT-ID() <, SendToServer CHAR-EXPRESSION > ]' Copy the current residual into a vector named CHAR-EXPRESSION or into a list named CONSTANT-ID. In the latter case, if 'SendToServer' is provided, copy the list to the ONELAB server as well. 'CopyResidual' '[CHAR-EXPRESSION | CONSTANT-ID(), SYSTEM-ID]' Copy the vector named CHAR-EXPRESSION or the list named CONSTANT-ID into the current residual. 'SaveSolution' '[SYSTEM-ID]' Save the solution of the system of equations SYSTEM-ID. 'SaveSolutions' '[SYSTEM-ID]' Save all the solutions available for the system of equations SYSTEM-ID. This should be used with algorithms that generate more than one solution at once, e.g., 'EigenSolve' or 'FourierTransform'. 'RemoveLastSolution' '[SYSTEM-ID]' Removes the last solution (i.e. associated with the last time step) associated with system SYSTEM-ID. 'TransferSolution' '[SYSTEM-ID]' Transfer the solution of system SYSTEM-ID, as an 'Assign' constraint, to the system of equations defined with a 'DestinationSystem' command. This is used with the 'AssignFromResolution' constraint type (*note Types for Constraint::). 'Evaluate' '[EXPRESSION <, EXPRESSION>]' Evaluate the EXPRESSION(s). 'SetTime' '[EXPRESSION]' Change the current time. 'SetTimeStep' '[EXPRESSION]' Change the current time step number (1, 2, 3, ...) 'SetDTime' '[EXPRESSION]' Change the current time step value (dt). 'SetFrequency' '[SYSTEM-ID, EXPRESSION]' Change the frequency of system SYSTEM-ID. 'SystemCommand' '[EXPRESSION-CHAR]' Execute the system command given by EXPRESSION-CHAR. 'Error' '[EXPRESSION-CHAR]' Output error message EXPRESSION-CHAR. 'Test' '[EXPRESSION] { RESOLUTION-OP }' If EXPRESSION is true (nonzero), perform the operations in RESOLUTION-OP. 'Test' '[EXPRESSION] { RESOLUTION-OP } { RESOLUTION-OP }' If EXPRESSION is true (nonzero), perform the operations in the first RESOLUTION-OP, else perform the operations in the second RESOLUTION-OP. 'While' '[EXPRESSION] { RESOLUTION-OP }' While EXPRESSION is true (nonzero), perform the operations in RESOLUTION-OP. 'Break' '[]' Aborts an iterative loop, a time loop or a While loop. 'Exit' '[]' Exit, brutally. 'Sleep' '[EXPRESSION]' Sleeps for EXPRESSION seconds; 'SetExtrapolationOrder' '[EXPRESSION-CST]' Chooses the extrapolation order to compute the initialization of the solution vector in time loops. Default is 0. 'Print' '[ { EXPRESSION-LIST } <, File EXPRESSION-CHAR > <, Format EXPRESSION-CHAR > ]' Print the expressions listed in EXPRESSION-LIST. If 'Format' is given, use it to format the (scalar) expressions like 'Printf'. 'Print' '[ SYSTEM-ID <, File EXPRESSION-CHAR > <, { EXPRESSION-CST-LIST } >' '<, TimeStep { EXPRESSION-CST-LIST } >]' Print the system SYSTEM-ID. If the EXPRESSION-CST-LIST is given, print only the values of the degrees of freedom given in that list. If the 'TimeStep' option is present, limit the printing to the selected time steps. 'EigenSolve' '[SYSTEM-ID, EXPRESSION-CST, EXPRESSION-CST, EXPRESSION-CST < , EXPRESSION > ]' Eigenvalue/eigenvector computation using Arpack or SLEPc. The parameters are: the system (which has to be generated with 'GenerateSeparate[]'), the number of eigenvalues/eigenvectors to compute and the real and imaginary spectral shift (around which to look for eigenvalues). The last optional argument allows to filter which eigenvalue/eigenvector pairs will be saved. For example, '($EigenvalueReal > 0)' would only keep pairs corresponding to eigenvalues with a striclty positive real part. 'Lanczos' '[SYSTEM-ID, EXPRESSION-CST, { EXPRESSION-CST-LIST } , EXPRESSION-CST]' Eigenvalue/eigenvector computation using the Lanczos algorithm. The parameters are: the system (which has to be generated with 'GenerateSeparate[]'), the size of the Lanczos space, the indices of the eigenvalues/eigenvectors to store, the spectral shift. This routine is deprecated: use 'EigenSolve' instead. 'FourierTransform' '[SYSTEM-ID, SYSTEM-ID, { EXPRESSION-CST-LIST }]' On-the-fly (incremental) computation of a Fourier transform. The parameters are: the (time domain) system, the destination system in which the result of the Fourier tranform is to be saved (it should be declared with 'Type Complex') and the list of frequencies to consider. The computation is an approximation that assumes that the time step is constant; it is not an actual Discrete Fourier Transform (the number of samples is unknown a priori). 'TimeLoopTheta' '[EXPRESSION-CST,EXPRESSION-CST,EXPRESSION,EXPRESSION-CST]' '{ RESOLUTION-OP }' Time loop of a theta scheme. The parameters are: the initial time, the end time, the time step and the theta parameter (e.g., 1 for implicit Euler, 0.5 for Crank-Nicholson). Warning: GetDP automatically handles time-dependent constraints when they are provided using the 'TimeFunction' mechanism in an 'Assign'-type 'Constraint' (*note Constraint::). However, GetDP cannot automatically transform general time-dependent source terms in weak formulations (time-dependent functions written in a 'Integral' term). Such source terms will be correctly treated only for implicit Euler, as the expression in the 'Integral' term is evaluated at the current time step. For other schemes, the source term should be written explicitly, by splitting it in two ('theta f_n+1 + (1-theta) f_n'), making use of the 'AtAnteriorTimeStep[]' for the second part, and specifying 'NeverDt' in the 'Integral' term. 'TimeLoopNewmark' '[EXPRESSION-CST,EXPRESSION-CST,EXPRESSION,EXPRESSION-CST,EXPRESSION-CST]' { RESOLUTION-OP } Time loop of a Newmark scheme. The parameters are: the initial time, the end time, the time step, the beta and the gamma parameter. Warning: same restrictions apply for time-dependent functions in the weak formulations as for 'TimeLoopTheta'. 'TimeLoopAdaptive' '[EXPRESSION-CST,EXPRESSION-CST,EXPRESSION-CST,EXPRESSION-CST, EXPRESSION-CST,INTEGRATION-METHOD,, System { {SYSTEM-ID,EXPRESSION-CST,EXPRESSION-CST,NORM-TYPE} ... } | PostOperation { {POST-OPERATION-ID,EXPRESSION-CST,EXPRESSION-CST,NORM-TYPE} ... } ]' '{ RESOLUTION-OP }' '{ RESOLUTION-OP }' Time loop with variable time steps. The step size is adjusted according the local truncation error (LTE) of the specified Systems/PostOperations via a predictor-corrector method. The parameters are: start time, end time, initial time step, min. time step, max. time step, integration method, list of breakpoints (time points to be hit). The LTE calculation can be based on all DOFs of a system and/or on a PostOperation result. The parameters here are: System/PostOperation for LTE assessment, relative LTE tolerance, absolute LTE tolerance, norm-type for LTE calculation. Possible choices for INTEGRATION-METHOD are: 'Euler, Trapezoidal, Gear_2, Gear_3, Gear_4, Gear_5, Gear_6'. The Gear methods correspond to backward differentiation formulas of order 2..6. Possible choices for NORM-TYPE: 'L1Norm, MeanL1Norm, L2Norm, MeanL2Norm, LinfNorm'. 'MeanL1Norm' and 'MeanL2Norm' correspond to 'L1Norm' and 'L2Norm' divided by the number of degrees of freedom, respectively. The first RESOLUTION-OP is executed every time step. The second one is only executed if the actual time step is accepted (LTE is in the specified range). E.g. 'SaveSolution[]' is usually placed in the 2nd RESOLUTION-OP. 'IterativeLoop' '[EXPRESSION-CST,EXPRESSION,EXPRESSION-CST<,EXPRESSION-CST>]' { RESOLUTION-OP } Iterative loop for nonlinear analysis. The parameters are: the maximum number of iterations (if no convergence), the relative error to achieve and the relaxation factor (multiplies the iterative correction DX). The optional parameter is a flag for testing purposes. 'IterativeLoopN' '[EXPRESSION-CST,EXPRESSION, System { {SYSTEM-ID,EXPRESSION-CST,EXPRESSION-CST, ASSESSED-OBJECT NORM-TYPE} ... } | PostOperation { {POST-OPERATION-ID,EXPRESSION-CST,EXPRESSION-CST, NORM-TYPE} ... } ]' { RESOLUTION-OP } Similar to 'IterativeLoop[]' but allows to specify in detail the tolerances and the type of norm to be calculated for convergence assessment. The parameters are: the maximum number of iterations (if no convergence), the relaxation factor (multiplies the iterative correction DX). The convergence assessment can be based on all DOFs of a system and/or on a PostOperation result. The parameters here are: System/PostOperation for convergence assessment, relative tolerance, absolute tolerance, assessed object (only applicable for a specified system), norm-type for error calculation. Possible choices for ASSESSED-OBJECT: 'Solution, Residual, RecalcResidual'. 'Residual' assesses the residual from the last iteration whereas 'RecalcResidual' calculates the residual once again after each iteration. This means that with 'Residual' usually one extra iteration is performed, but 'RecalcResidual' causes higher computational effort per iteration. Assessing the residual can only be used for Newton's method. Possible choices for NORM-TYPE: 'L1Norm, MeanL1Norm, L2Norm, MeanL2Norm, LinfNorm'. 'MeanL1Norm' and 'MeanL2Norm' correspond to 'L1Norm' and 'L2Norm' divided by the number of degrees of freedom, respectively. 'IterativeLinearSolver' Generic iterative linear solver. To be documented. 'PostOperation' '[POST-OPERATION-ID]' Perform the specified 'PostOperation'. 'GmshRead' '[EXPRESSION-CHAR]' When GetDP is linked with the Gmsh library, read a file using Gmsh. This file can be in any format recognized by Gmsh. If the file contains one or multiple post-processing fields, these fields will be evaluated using the built-in 'Field[]', 'ScalarField[]', 'VectorField[]', etc., functions (*note Miscellaneous functions::). (Note that 'GmshOpen' and 'GmshMerge' can be used instead of 'GmshRead' to force Gmsh to do classical "open" and "merge" operations, instead of trying to "be intelligent" when reading post-processing datasets, i.e., creating new models on the fly if necessary.) 'GmshRead' '[EXPRESSION-CHAR, EXPRESSION-CST]' Same thing as the 'GmshRead' command above, except that the field is forced to be stored with the given tag. The tag can be used to retrieve the given field with the built-in 'Field[]', 'ScalarField[]', 'VectorField[]', etc., functions (*note Miscellaneous functions::). 'GmshRead' '[EXPRESSION-CHAR, $STRING]' Same as the 'GmshRead', but evaluates EXPRESSION-CHAR by replacing a double precision format specifier with the value of the runtime variable '$'STRING. 'GmshWrite' '[EXPRESSION-CHAR, EXPRESSION-CST]' Writes the a Gmsh field to disk. (The format is guessed from the file extension.) 'GmshClearAll' '[]' Clears all Gmsh data (loaded with 'GmshRead' and friends). 'ReadTable' '[EXPRESSION-CHAR, EXPRESSION-CHAR]' Reads tabular data in the same format as 'ListFromFile', and stores in the run-time table named after the second EXPRESSION-CHAR. 'DeleteFile' '[EXPRESSION-CHAR]' Delete a file. 'RenameFile' '[EXPRESSION-CHAR, EXPRESSION-CHAR]' Rename a file. 'CreateDir | CreateDirectory' '[EXPRESSION-CHAR]' Create a directory. 'MPI_SetCommSelf' '[]' Changes MPI communicator to self. 'MPI_SetCommWorld' '[]' Changes MPI communicator to world. 'MPI_Barrier' '[]' MPI barrier (blocks until all processes have reached this call). 'MPI_BroadcastFields' '[ < EXPRESSION-LIST > ]' Broadcast all fields over MPI (except those listed in the list). 'MPI_BroadcastVariables' '[]' Broadcast all runtime variables over MPI. 6.9 Types for 'PostProcessing' ============================== POST-VALUE: 'Local' { LOCAL-VALUE } To compute a local quantity. 'Integral' { INTEGRAL-VALUE } To integrate the expression over each element. 6.10 Types for 'PostOperation' ============================== PRINT-SUPPORT: 'OnElementsOf' GROUP-DEF To compute a quantity on the elements belonging to the region GROUP-DEF, where the solution was computed during the processing stage. 'OnRegion' GROUP-DEF To compute a global quantity associated with the region GROUP-DEF. 'OnGlobal' To compute a global integral quantity, with no associated region. 'OnSection' { { EXPRESSION-CST-LIST } { EXPRESSION-CST-LIST } { EXPRESSION-CST-LIST } } To compute a quantity on a section of the mesh defined by three points (i.e., on the intersection of the mesh with a cutting a plane, specified by three points). Each EXPRESSION-CST-LIST must contain exactly three elements (the coordinates of the points). 'OnGrid' GROUP-DEF To compute a quantity in elements of a mesh which differs from the real support of the solution. 'OnGrid GROUP-DEF' differs from 'OnElementsOf GROUP-DEF' by the reinterpolation that must be performed. 'OnGrid' '{ EXPRESSION, EXPRESSION, EXPRESSION }' '{ EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST } ,' ' EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST } ,' ' EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST } }' To compute a quantity on a parametric grid. The three EXPRESSIONs represent the three cartesian coordinates X, Y and Z, and can be functions of the current values '$A', '$B' and '$C'. The values for '$A', '$B' and '$C' are specified by each EXPRESSION-CST-LIST-ITEM or EXPRESSION-CST-LIST. For example, 'OnGrid {Cos[$A], Sin[$A], 0} { 0:2*Pi:Pi/180, 0, 0 }' will compute the quantity on 360 points equally distributed on a circle in the z=0 plane, and centered on the origin. 'OnPoint' { EXPRESSION-CST-LIST } To compute a quantity at a point. The EXPRESSION-CST-LIST must contain exactly three elements (the coordinates of the point). 'OnLine' { { EXPRESSION-CST-LIST } { EXPRESSION-CST-LIST } } { EXPRESSION-CST } To compute a quantity along a line (given by its two end points), with an associated number of divisions equal to EXPRESSION-CST. The interpolation points on the line are equidistant. Each EXPRESSION-CST-LIST must contain exactly three elements (the coordinates of the points). 'OnPlane' { { EXPRESSION-CST-LIST } { EXPRESSION-CST-LIST } { EXPRESSION-CST-LIST } } '{ EXPRESSION-CST, EXPRESSION-CST }' To compute a quantity on a plane (specified by three points: the origin and the end of the unit vectors), with an associated number of divisions equal to each EXPRESSION-CST along both generating directions. Each EXPRESSION-CST-LIST must contain exactly three elements (the coordinates of the points). 'OnBox' { { EXPRESSION-CST-LIST } { EXPRESSION-CST-LIST } { EXPRESSION-CST-LIST } ' { EXPRESSION-CST-LIST } } { EXPRESSION-CST, EXPRESSION-CST, EXPRESSION-CST }' To compute a quantity in a box (specified by four points), with an associated number of divisions equal to each EXPRESSION-CST along the three generating directions. Each EXPRESSION-CST-LIST must contain exactly three elements (the coordinates of the points). PRINT-OPTION: 'File' 'EXPRESSION-CHAR' Outputs the result in a file named EXPRESSION-CHAR. 'File' '> EXPRESSION-CHAR' Same as 'File EXPRESSION-CHAR', except that, if several 'File > EXPRESSION-CHAR' options appear in the same 'PostOperation', the results are concatenated in the file EXPRESSION-CHAR. 'File' '>> EXPRESSION-CHAR' Appends the result to a file named EXPRESSION-CHAR. 'AppendToExistingFile' EXPRESSION-CST Appends the result to the file specified with 'File'. (Same behavior as '>' if EXPRESSION-CST = 1; same behavior as '>>' if EXPRESSION-CST = 2.) 'Name | Label' 'EXPRESSION-CHAR' For formats that support it, sets the label of the output field to EXPRESSION-CHAR (also used with with 'SendToServer' to force the label). 'Depth' EXPRESSION-CST Recursive division of the elements if EXPRESSION-CST is greater than zero, derefinement if EXPRESSION-CST is smaller than zero. If EXPRESSION-CST is equal to zero, evaluation at the barycenter of the elements. 'AtGaussPoints' EXPRESSION-CST Print result at the specified number of Gauss points. 'Skin' Computes the result on the boundary of the region. 'Smoothing' < EXPRESSION-CST > Smoothes the solution at the nodes. 'HarmonicToTime' EXPRESSION-CST Converts a harmonic solution into a time-dependent one (with EXPRESSION-CST steps). 'Dimension' EXPRESSION-CST Forces the dimension of the elements to consider in an element search. Specifies the problem dimension during an adaptation (h- or p-refinement). 'TimeStep' 'EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST }' Outputs results for the specified time steps only. 'TimeValue' 'EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST }' Outputs results for the specified time value(s) only. 'TimeImagValue' 'EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST }' Outputs results for the specified imaginary time value(s) only. 'LastTimeStepOnly' Outputs results for the last time step only (useful when calling a 'PostOperation' directly in a 'Resolution', for example). 'AppendExpressionToFileName' EXPRESSION Evaluate the given EXPRESSION at run-time and append it to the filename. 'AppendExpressionFormat' EXPRESSION-CHAR C-style format string for printing the EXPRESSION provided in 'AppendExpressionToFileName'. Default is '"%.16g"'. 'AppendTimeStepToFileName' < EXPRESSION-CST > Appends the time step to the output file; only makes sense with 'LastTimeStepOnly'. 'AppendStringToFileName' EXPRESSION-CHAR Append the given EXPRESSION-CHAR to the filename. 'OverrideTimeStepValue' EXPRESSION-CST Overrides the value of the current time step with the given value. 'NoMesh' < EXPRESSION-CST > Prevents the mesh from being written in the output file (useful with new mesh-based solution formats). 'SendToServer' EXPRESSION-CHAR Send the value to the Onelab server, using EXPRESSION-CHAR as the parameter name. 'SendToServer' EXPRESSION-CHAR { EXPRESSION-CST-LIST } Send the requested harmonics of the value to the Onelab server, using EXPRESSION-CHAR as the parameter name. 'Color' EXPRESSION-CHAR Used with 'SendToServer', sets the color of the parameter in the Onelab server. 'Hidden' < EXPRESSION-CST > Used with 'SendToServer', selects the visibility of the exchanged value. 'Closed' EXPRESSION-CHAR Used with 'SendToServer', closes (or opens) the subtree containing the parameter. 'Units' EXPRESSION-CHAR Used with 'SendToServer', sets the units of the parameter in the Onelab server. 'Frequency' 'EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST }' Outputs results for the specified frequencies only. 'Format' POST-OPERATION-FMT Outputs results in the specified format. 'Adapt' 'P1 | H1 | H2' Performs p- or h-refinement on the post-processing result, considered as an error map. 'Target' EXPRESSION-CST Specifies the target for the optimizer during adaptation (error for 'P1|H1', number of elements for 'H2'). 'Value' 'EXPRESSION-CST-LIST-ITEM | { EXPRESSION-CST-LIST }' Specifies acceptable output values for discrete optimization (e.g. the available interpolation orders with 'Adapt P1'). 'Sort' 'Position | Connection' Sorts the output by position (x, y, z) or by connection (for 'LINE' elements only). 'Iso' EXPRESSION-CST Outputs directly contour prints (with EXPRESSION-CST values) instead of elementary values. 'Iso' '{ EXPRESSION-CST-LIST }' Outputs directly contour prints for the values specified in the EXPRESSION-CST-LIST instead of elementary values. 'NoNewLine' Suppresses the new lines in the output when printing global quantities (i.e., with 'Print OnRegion' or 'Print OnGlobal'). 'ChangeOfCoordinates' '{ EXPRESSION, EXPRESSION, EXPRESSION }' Changes the coordinates of the results according to the three expressions given in argument. The three EXPRESSIONs represent the three new cartesian coordinates X, Y and Z, and can be functions of the current values of the cartesian coordinates '$X', '$Y' and '$Z'. 'ChangeOfValues' '{ EXPRESSION-LIST }' Changes the values of the results according to the expressions given in argument. The EXPRESSIONs represent the new values (X-compoment, Y-component, etc.), and can be functions of the current values of the solution ($VAL0, $VAL1, etc.). 'DecomposeInSimplex' Decomposes all output elements in simplices (points, lines, triangles or tetrahedra). 'StoreInVariable' '$EXPRESSION-CHAR' Stores the result of a point-wise evaluation or an 'OnRegion' post-processing operation in the run-time variable $code[$]EXPRESSION-CHAR. 'StoreInRegister' 'EXPRESSION-CST' Stores the result of point-wise evaluation or an 'OnRegion' post-processing operation in the register EXPRESSION-CST. 'StoreMinInRegister' 'StoreMaxInRegister' 'EXPRESSION-CST' Stores the minimum or maximum value of an 'OnElementsOf' post-processing operation in the register EXPRESSION-CST. 'StoreMinXinRegister' 'StoreMinYinRegister' 'StoreMinZinRegister' 'StoreMaxXinRegister' 'StoreMaxYinRegister' 'StoreMaxZinRegister' 'EXPRESSION-CST' Stores the X, Y or Z coordinate of the location, where the minimum or maximum of an 'OnElementsOf' post-processing operation occurs, in the register EXPRESSION-CST. 'StoreInField' 'EXPRESSION-CST' Stores the result of a post-processing operation in the field (Gmsh list-based post-processing view) with tag EXPRESSION-CST. 'StoreInMeshBasedField' 'EXPRESSION-CST' Stores the result of a post-processing operation in the mesh-based field (Gmsh mesh-based post-processing view) with tag EXPRESSION-CST. 'TimeLegend' '< { EXPRESSION, EXPRESSION, EXPRESSION } >' Includes a time legend in Gmsh plots. If the three optional expressions giving the position of the legend are not specified, the legend is centered on top of the plot. 'FrequencyLegend' '< { EXPRESSION, EXPRESSION, EXPRESSION } >' Includes a frequency legend in Gmsh plots. If the three optional expressions giving the position of the legend are not specified, the legend is centered on top of the plot. 'EigenvalueLegend' '< { EXPRESSION, EXPRESSION, EXPRESSION } >' Includes an eigenvalue legend in Gmsh plots. If the three optional expressions giving the position of the legend are not specified, the legend is centered on top of the plot. POST-OPERATION-FMT: 'Gmsh' 'GmshParsed' Gmsh output. See *note Input file format:: and the documentation of Gmsh () for a description of the file formats. 'Table' Space oriented column output, e.g., suitable for Gnuplot, Excel, Caleida Graph, etc. The columns are: ELEMENT-TYPE ELEMENT-INDEX X-COORD Y-COORD Z-COORD ... REAL REAL REAL VALUES. The three REAL numbers preceding the VALUES contain context-dependent information, depending on the type of plot: curvilinear abscissa for 'OnLine' plots, normal to the plane for 'OnPlane' plots, parametric coordinates for parametric 'OnGrid' plots, etc. 'SimpleTable' Like 'Table', but with only the X-COORD Y-COORD Z-COORD and VALUES columns. 'TimeTable' Time oriented column output, e.g., suitable for Gnuplot, Excel, Caleida Graph, etc. The columns are: TIME-STEP TIME X-COORD Y-COORD Z-COORD ... VALUE. 'NodeTable' Table of nodal values, in the form NODE-NUMBER NODE-VALUE(s). When exported to a file, the total number of nodal values is printed first. The data is automatically exported as a run-time accessible list as well as a ONELAB variable, with the name of the 'PostOperation' quantity. The values are also directly usable by the 'ValueFromTable' function, which allows to use them as values in a nodal 'Constraint'. 'ElementTable' Table of element values, in the form ELEMENT-NUMBER ELEMENT-NODE-VALUE(s). When exported to a file, the total number of element values is printed first. The data is automatically exported as a run-time accessible list as well as a ONELAB variable, with the name of the 'PostOperation' quantity. The values are also directly usable by the 'ValueFromTable' function, which allows to use them as values in an element-wise 'Constraint'. 'Gnuplot' Space oriented column output similar to the 'Table' format, except that a new line is created for each node of each element, with a repetition of the first node if the number of nodes in the element is greater than 2. This permits to draw unstructured meshes and nice three-dimensional elevation plots in Gnuplot. The columns are: ELEMENT-TYPE ELEMENT-INDEX X-COORD Y-COORD Z-COORD REAL REAL REAL VALUES. The three REAL numbers preceding the VALUES contain context-dependent information, depending on the type of plot: curvilinear abscissa for 'OnLine' plots, normal to the plane for 'OnPlane' plots, parametric coordinates for parametric 'OnGrid' plots, etc. 'Adaptation' Adaptation map, suitable for the GetDP '-adapt' command line option. 7 Short examples **************** 7.1 Constant expression examples ================================ The simplest constant expression consists of an INTEGER or a REAL number as in 21 -3 or -3.1415 27e3 -290.53e-12 Using operators and the classic math functions, CONSTANT-IDs can be defined: c1 = Sin[2/3*3.1415] * 5000^2; c2 = -1/c1; 7.2 'Group' examples ==================== Let us assume that some elements in the input mesh have the region numbers 1000, 2000 and 3000. In the definitions Group { Air = Region[1000]; Core = Region[2000]; Inductor = Region[3000]; NonConductingDomain = Region[{Air, Core}]; ConductingDomain = Region[{Inductor}]; } 'Air', 'Core', 'Inductor' are identifiers of elementary region groups while 'NonConductingDomain' and 'ConductingDomain' are global region groups. Groups of function type contain lists of entities built on the region groups appearing in their arguments. For example, NodesOf[NonConductingDomain] represents the group of nodes of geometrical elements belonging to the regions in 'NonConductingDomain' and EdgesOf[DomainC, Not SkinDomainC] represents the group of edges of geometrical elements belonging to the regions in 'DomainC' but not to those of 'SkinDomainC'. 7.3 'Function' examples ======================= A physical characteristic is a piecewise defined function. The magnetic permeability 'mu[]' can for example be defined in the considered regions by Function { mu[Air] = 4.e-7*Pi; mu[Core] = 1000.*4.e-7*Pi; } A nonlinear characteristic can be defined through an EXPRESSION with arguments, e.g., Function { mu0 = 4.e-7*Pi; a1 = 1000.; b1 = 100.; // Constants mu[NonlinearCore] = mu0 + 1./(a1+b1*Norm[$1]^6); } where function 'mu[]' in region 'NonLinearCore' has one argument '$1' which has to be the magnetic flux density. This function is actually called when writing the equations of a formulation, which permits to directly extend it to a nonlinear form by adding only the necessary arguments. For example, in a magnetic vector potential formulation, one may write 'mu[{Curl a}]' instead of 'mu[]' in 'Equation' terms (*note Formulation examples::). Multiple arguments can be specified in a similar way: writing 'mu[{Curl a},{T}]' in an 'Equation' term will provide the function 'mu[]' with two usable arguments, '$1' (the magnetic flux density) and '$2' (the temperature). It is also possible to directly interpolate one-dimensional functions from tabulated data. In the following example, the function F(X) as well as its derivative F'(X) are interpolated from the (X,F(X)) couples (0,0.65), (1,0.72), (2,0.98) and (3,1.12): Function { couples = {0, 0.65 , 1, 0.72 , 2, 0.98 , 3, 1.12}; f[] = InterpolationLinear[$1]{List[couples]}; dfdx[] = dInterpolationLinear[$1]{List[couples]}; } The function 'f[]' may then be called in an 'Equation' term of a 'Formulation' with one argument, X. Notice how the list of constants 'List[couples]' is supplied as a list of parameters to the built-in function 'InterpolationLinear' (*note Constants::, as well as *note Functions::). In order to facilitate the construction of such interpolations, the couples can also be specified in two separate lists, merged with the alternate list 'ListAlt' command (*note Constants::): Function { data_x = {0, 1, 2, 3}; data_f = {0.65, 0.72, 0.98, 1.12}; f[] = InterpolationLinear[$1]{ListAlt[data_x, data_f]}; dfdx[] = dInterpolationLinear[$1]{ListAlt[data_x, data_f]}; } In order to optimize the evaluation time of complex expressions, registers may be used (*note Run-time variables and registers::). For example, the evaluation of 'g[] = f[$1]*Sin[f[$1]^2]' would require two (costly) linear interpolations. But the result of the evaluation of 'f[]' may be stored in a register (for example the register 0) with g[] = f[$1]#0 * Sin[#0^2]; thus reducing the number of evaluations of 'f[]' (and of the argument '$1') to one. The same results can be obtained using a run-time variable '$v': g[] = ($v = f[$1]) * Sin[$v^2]; A function can also be time dependent, e.g., Function { Freq = 50.; Phase = 30./180.*Pi; // Constants TimeFct_Sin[] = Sin [ 2.*Pi*Freq * $Time + Phase ]; TimeFct_Exp[] = Exp [ - $Time / 0.0119 ]; TimeFct_ExtSin[] = Sin_wt_p [] {2.*Pi*Freq, Phase}; } Note that 'TimeFct_ExtSin[]' is identical to 'TimeFct_Sin[]' in a time domain analysis, but also permits to define phasors implicitely in the case of harmonic analyses. 7.4 'Constraint' examples ========================= Constraints are referred to in 'FunctionSpace's and are usually used for boundary conditions ('Assign' type). For example, essential conditions on two surface regions, 'Surf0' and 'Surf1', will be first defined by Constraint { { Name DirichletBoundaryCondition1; Type Assign; Case { { Region Surf0; Value 0.; } { Region Surf1; Value 1.; } } } } The way the 'Value's are associated with 'Region's (with their nodes, their edges, their global regions, ...) is defined in the 'FunctionSpace's which use the 'Constraint'. In other words, a 'Constraint' defines data but does not define the method to process them. A time dependent essential boundary condition on 'Surf1' would be introduced as (cf. *note Function examples:: for the definition of 'TimeFct_Exp[]'): { Region Surf1; Value 1.; TimeFunction 3*TimeFct_Exp[] } It is important to notice that the time dependence cannot be introduced in the 'Value' field, since the 'Value' is only evaluated once during the pre-processing. Other constraints can be referred to in 'Formulation's. It is the case of those defining electrical circuit connections ('Network' type), e.g., Constraint { { Name ElectricalCircuit; Type Network; Case Circuit1 { { Region VoltageSource; Branch {1,2}; } { Region PrimaryCoil; Branch {1,2}; } } Case Circuit2 { { Region SecondaryCoil; Branch {1,2}; } { Region Charge; Branch {1,2}; } } } } which defines two non-connected circuits ('Circuit1' and 'Circuit2'), with an independent numbering of nodes: region 'VoltageSource' is connected in parallel with region 'PrimaryCoil', and region 'SecondaryCoil' is connected in parallel with region 'Charge'. 7.5 'FunctionSpace' examples ============================ Various discrete function spaces can be defined in the frame of the finite element method. 7.5.1 Nodal finite element spaces --------------------------------- The most elementary function space is the nodal finite element space, defined on a mesh of a domain W and denoted S0(W) (associated finite elements can be of various geometries), and associated with essential boundary conditions (Dirichlet conditions). It contains 0-forms, i.e., scalar fields of potential type: V = Sum [ VN * SN, for all N in N ], V in S0(W) where N is the set of nodes of W, SN is the nodal basis function associated with node N and VN is the value of V at node N. It is defined by FunctionSpace { { Name Hgrad_v; Type Form0; BasisFunction { { Name sn; NameOfCoef vn; Function BF_Node; Support Domain; Entity NodesOf[All]; } } Constraint { { NameOfCoef vn; EntityType NodesOf; NameOfConstraint DirichletBoundaryCondition1; } } } } Function 'sn' is the built-in basis function BF_Node associated with all nodes ('NodesOf') in the mesh of W ('Domain'). Previously defined 'Constraint DirichletBoundaryCondition1' (*note Constraint examples::) is used as boundary condition. In the example above, 'Entity NodesOf[All]' is preferred to 'Entity NodesOf[Domain]'. In this way, the list of all the nodes of 'Domain' will not have to be generated. All the nodes of each geometrical element in 'Support Domain' will be directly taken into account. 7.5.2 High order nodal finite element space ------------------------------------------- Higher order finite elements can be directly taken into account by 'BF_Node'. Hierarchical finite elements for 0-forms can be used by simply adding other basis functions (associated with other geometrical entities, e.g., edges and facets) to 'BasisFunction', e.g., ... BasisFunction { { Name sn; NameOfCoef vn; Function BF_Node; Support Domain; Entity NodesOf[All]; } { Name s2; NameOfCoef v2; Function BF_Node_2E; Support Domain; Entity EdgesOf[All]; } } ... 7.5.3 Nodal finite element space with floating potentials --------------------------------------------------------- A scalar potential with floating values VF on certain boundaries GF, F in CF, e.g., for electrostatic problems, can be expressed as V = Sum [ VN * SN, for all N in NV ] + Sum [ VF * SF, for all F in CF ], V in S0(W) where NV is the set of inner nodes of W and each function SF is associated with the group of nodes of boundary GF, F in CF ('SkinDomainC'); SF is the sum of the nodal basis functions of all the nodes of CF. Its function space is defined by FunctionSpace { { Name Hgrad_v_floating; Type Form0; BasisFunction { { Name sn; NameOfCoef vn; Function BF_Node; Support Domain; Entity NodesOf[All, Not SkinDomainC]; } { Name sf; NameOfCoef vf; Function BF_GroupOfNodes; Support Domain; Entity GroupsOfNodesOf[SkinDomainC]; } } GlobalQuantity { { Name GlobalElectricPotential; Type AliasOf; NameOfCoef vf; } { Name GlobalElectricCharge; Type AssociatedWith; NameOfCoef vf; } } Constraint { ... } } } Two global quantities have been associated with this space: the electric potential 'GlobalElectricPotential', being an alias of coefficient 'vf', and the electric charge 'GlobalElectricCharge', being associated with coefficient 'vf'. 7.5.4 Edge finite element space ------------------------------- Another space is the edge finite element space, denoted S1(W), containing 1-forms, i.e., curl-conform fields: H = Sum [ HE * SE, for all E in E ], H in S1(W) where E is the set of edges of W, SE is the edge basis function for edge E and HE is the circulation of H along edge E. It is defined by FunctionSpace { { Name Hcurl_h; Type Form1; BasisFunction { { Name se; NameOfCoef he; Function BF_Edge; Support Domain; Entity EdgesOf[All]; } } Constraint { ... } } } 7.5.5 Edge finite element space with gauge condition ---------------------------------------------------- A 1-form function space containing vector potentials can be associated with a gauge condition, which can be defined as a constraint, e.g., a zero value is fixed for all circulations along edges of a tree ('EdgesOfTreeIn') built in the mesh ('Domain'), having to be complete on certain boundaries ('StartingOn Surf'): Constraint { { Name GaugeCondition_a_Mag_3D; Type Assign; Case { { Region Domain; SubRegion Surf; Value 0.; } } } } FunctionSpace { { Name Hcurl_a_Gauge; Type Form1; BasisFunction { { Name se; NameOfCoef ae; Function BF_Edge; Support Domain; Entity EdgesOf[All]; } } Constraint { { NameOfCoef ae; EntityType EdgesOfTreeIn; EntitySubType StartingOn; NameOfConstraint GaugeCondition_a_Mag_3D; } ... } } } 7.5.6 Coupled edge and nodal finite element spaces -------------------------------------------------- A 1-form function space, containing curl free fields in certain regions WCC ('DomainCC') of W, which are the complementary part of WC ('DomainC') in W, can be explicitly characterized by H = Sum [ HK * SK, for all E in EC ] + Sum [ PHIN * VN, for all N in NCC ], H in S1(W) where EC is the set of inner edges of W, NCC is the set of nodes inside WCC and on its boundary DWCC, SK is an edge basis function and VN is a vector nodal function. Such a space, coupling a vector field with a scalar potential, can be defined by FunctionSpace { { Name Hcurl_hphi; Type Form1; BasisFunction { { Name sk; NameOfCoef hk; Function BF_Edge; Support DomainC; Entity EdgesOf[All, Not SkinDomainC]; } { Name vn; NameOfCoef phin; Function BF_GradNode; Support DomainCC; Entity NodesOf[All]; } { Name vn; NameOfCoef phic; Function BF_GroupOfEdges; Support DomainC; Entity GroupsOfEdgesOnNodesOf[SkinDomainC];} } Constraint { { NameOfCoef hk; EntityType EdgesOf; NameOfConstraint MagneticField; } { NameOfCoef phin; EntityType NodesOf; NameOfConstraint MagneticScalarPotential; } { NameOfCoef phic; EntityType NodesOf; NameOfConstraint MagneticScalarPotential; } } } } This example points out the definition of a piecewise defined basis function, e.g., function 'vn' being defined with 'BF_GradNode' in 'DomainCC' and 'BF_GroupOfEdges' in 'DomainC'. This leads to an easy coupling between these regions. 7.5.7 Coupled edge and nodal finite element spaces for multiply connected domains --------------------------------------------------------------------------------- In case a multiply connected domain WCC is considered, basis functions associated with cuts ('SurfaceCut') have to be added to the previous basis functions, which gives the function space below: Group { _TransitionLayer_SkinDomainC_ = ElementsOf[SkinDomainC, OnOneSideOf SurfaceCut]; } FunctionSpace { { Name Hcurl_hphi; Type Form1; BasisFunction { ... SAME AS ABOVE ... { Name sc; NameOfCoef Ic; Function BF_GradGroupOfNodes; Support ElementsOf[DomainCC, OnOneSideOf SurfaceCut]; Entity GroupsOfNodesOf[SurfaceCut]; } { Name sc; NameOfCoef Icc; Function BF_GroupOfEdges; Support DomainC; Entity GroupsOfEdgesOf [SurfaceCut, InSupport _TransitionLayer_SkinDomainC_]; } } GlobalQuantity { { Name I; Type AliasOf ; NameOfCoef Ic; } { Name U; Type AssociatedWith; NameOfCoef Ic; } } Constraint { ... SAME AS ABOVE ... { NameOfCoef Ic; EntityType GroupsOfNodesOf; NameOfConstraint Current; } { NameOfCoef Icc; EntityType GroupsOfNodesOf; NameOfConstraint Current; } { NameOfCoef U; EntityType GroupsOfNodesOf; NameOfConstraint Voltage; } } } } Global quantities associated with the cuts, i.e., currents and voltages if H is the magnetic field, have also been defined. 7.6 'Jacobian' examples ======================= A simple Jacobian method is for volume transformations (of N-D regions in N-D geometries; N = 1, 2 or 3), e.g., in region 'Domain', Jacobian { { Name Vol; Case { { Region Domain; Jacobian Vol; } } } } 'Jacobian VolAxi' would define a volume Jacobian for axisymmetrical problems. A Jacobian method can also be piecewise defined, in 'DomainInf', where an infinite geometrical transformation has to be made using two constant parameters (inner and outer radius of a spherical shell), and in all the other regions ('All', being the default); in each case, a volume Jacobian is used. This method is defined by: Jacobian { { Name Vol; Case { { Region DomainInf; Jacobian VolSphShell {Val_Rint, Val_Rext}; } { Region All; Jacobian Vol; } } } } 7.7 'Integration' examples ========================== A commonly used numerical integration method is the 'Gauss' integration, with a number of integration points ('NumberOfPoints') depending on geometrical element types ('GeoElement'), i.e. Integration { { Name Int_1; Case { {Type Gauss; Case { { GeoElement Triangle ; NumberOfPoints 4; } { GeoElement Quadrangle ; NumberOfPoints 4; } { GeoElement Tetrahedron; NumberOfPoints 4; } { GeoElement Hexahedron ; NumberOfPoints 6; } { GeoElement Prism ; NumberOfPoints 9; } } } } } } The method above is valid for both 2D and 3D problems, for different kinds of elements. 7.8 'Formulation' examples ========================== 7.8.1 Electrostatic scalar potential formulation ------------------------------------------------ An electrostatic formulation using an electric scalar potential V, i.e. ( epsr grad V, grad VP ) W = 0, for all VP in S0(W), is expressed by Formulation { { Name Electrostatics_v; Type FemEquation; Quantity { { Name v; Type Local; NameOfSpace Hgrad_v; } } Equation { Integral { [ epsr[] * Dof{Grad v} , {Grad v} ]; In Domain; Jacobian Vol; Integration Int_1; } } } } The density of the 'Integral' term is a copy of the symbolic form of the formulation, i.e., the product of a relative permittivity function 'epsr[]' by a vector of degrees of freedom ('Dof{.}'); the scalar product of this with the gradient of test function 'v' results in a symmetrical matrix. Note that another 'Quantity' could be defined for test functions, e.g., 'vp' defined by '{ Name vp; Type Local; NameOfSpace Hgrad_v; }'. However, its use would result in the computation of a full matrix and consequently in a loss of efficiency. 7.8.2 Electrostatic scalar potential formulation with floating potentials and electric charges ---------------------------------------------------------------------------------------------- An extension of the formulation above can be made to take floating potentials and electrical charges into account (the latter being defined in 'FunctionSpace Hgrad_v_floating'), i.e. Formulation { { Name Electrostatics_v_floating; Type FemEquation; Quantity { { Name v; Type Local; NameOfSpace Hgrad_v_floating; } { Name V; Type Global; NameOfSpace Hgrad_v_floating [GlobalElectricPotential]; } { Name Q; Type Global; NameOfSpace Hgrad_v_floating [GlobalElectricCharge]; } } Equation { Integral { [ epsr[] * Dof{Grad v} , {Grad v} ]; In Domain; Jacobian Vol; Integration Int_1; } GlobalTerm { [ - Dof{Q}/eps0 , {V} ]; In SkinDomainC; } } } } with the predefinition 'Function { eps0 = 8.854187818e-12; }'. 7.8.3 Magnetostatic 3D vector potential formulation --------------------------------------------------- A magnetostatic 3D vector potential formulation ( NU curl A , curl AP ) W - ( JS , AP ) WS = 0, for all AP in S1(W) with gauge condition, with a source current density JS in inductors WS, is expressed by Formulation { { Name Magnetostatics_a_3D; Type FemEquation; Quantity { { Name a; Type Local; NameOfSpace Hcurl_a_Gauge; } } Equation { Integral { [ nu[] * Dof{Curl a} , {Curl a} ]; In Domain; Jacobian Vol; Integration Int_1; } Integral { [ - SourceCurrentDensity[] , {a} ]; In DomainWithSourceCurrentDensity; Jacobian Vol; Integration Int_1; } } } } Note that JS is here given by a function 'SourceCurrentDensity[]', but could also be given by data computed from another problem, e.g., from an electrokinetic problem (coupling of formulations) or from a fully fixed function space (constraints fixing the density, which is usually more efficient in time domain analyses). 7.8.4 Magnetodynamic 3D or 2D magnetic field and magnetic scalar potential formulation -------------------------------------------------------------------------------------- A magnetodynamic 3D or 2D H-PHI formulation, i.e., coupling the magnetic field H with a magnetic scalar potential PHI, Dt ( MU H , HP ) W + ( RO curl H , curl HP ) WC = 0, for all HP in S1(W), can be expressed by Formulation { { Name Magnetodynamics_hphi; Type FemEquation; Quantity { { Name h; Type Local; NameOfSpace Hcurl_hphi; } } Equation { Integral { Dt [ mu[] * Dof{h} , {h} ]; In Domain; Jacobian Vol; Integration Int_1; } Integral { [ rho[] * Dof{Curl h} , {Curl h} ]; In DomainC; Jacobian Vol; Integration Int_1; } } } } 7.8.5 Nonlinearities, Mixed formulations, ... --------------------------------------------- In case nonlinear physical characteristics are considered, arguments are used for associated functions, e.g., 'mu[{h}]'. Several test functions can be considered in an 'Equation' field. Consequently, mixed formulations can be defined. 7.9 'Resolution' examples ========================= 7.9.1 Static resolution (electrostatic problem) ----------------------------------------------- A static resolution, e.g., for the electrostatic formulation (*note Formulation examples::), can be defined by Resolution { { Name Electrostatics_v; System { { Name Sys_Ele; NameOfFormulation Electrostatics_v; } } Operation { Generate[Sys_Ele]; Solve[Sys_Ele]; SaveSolution[Sys_Ele]; } } } The generation ('Generate') of the matrix of the system 'Sys_Ele' will be made with the formulation 'Electrostatics_v', followed by its solving ('Solve') and the saving of the solution ('SaveSolution'). 7.9.2 Frequency domain resolution (magnetodynamic problem) ---------------------------------------------------------- A frequency domain resolution, e.g., for the magnetodynamic H-PHI formulation (*note Formulation examples::), is given by Resolution { { Name Magnetodynamics_hphi; System { { Name Sys_Mag; NameOfFormulation Magnetodynamics_hphi; Frequency Freq; } } Operation { Generate[Sys_Mag]; Solve[Sys_Mag]; SaveSolution[Sys_Mag]; } } } preceded by the definition of constant 'Freq', e.g., Function { Freq = 50.; } 7.9.3 Time domain resolution (magnetodynamic problem) ----------------------------------------------------- A time domain resolution, e.g., for the same magnetodynamic H-PHI formulation (*note Formulation examples::), is given by Resolution { { Name Magnetodynamics_hphi_Time; System { { Name Sys_Mag; NameOfFormulation Magnetodynamics_hphi; } } Operation { InitSolution[Sys_Mag]; SaveSolution[Sys_Mag]; TimeLoopTheta[Mag_Time0, Mag_TimeMax, Mag_DTime[], Mag_Theta[]] { Generate[Sys_Mag]; Solve[Sys_Mag]; SaveSolution[Sys_Mag]; } } } } If, e.g., the 'Resolution' above is preceded by the constant and function definitions below Function { Tc = 10.e-3; Mag_Time0 = 0.; Mag_TimeMax = 2.*Tc; Mag_DTime[] = Tc/20.; Mag_Theta[] = 1./2.; } the performed time domain analysis will be a Crank-Nicolson scheme (theta-scheme with 'Theta = 0.5') with initial time 0 ms, end time 20 ms and time step 1 ms. 7.9.4 Nonlinear time domain resolution (magnetodynamic problem) --------------------------------------------------------------- In case a nonlinear problem is solved, an iterative loop has to be defined in an appropriate level of the recursive resolution operations, e.g., for the magnetodynamic problem above, ... Operation { InitSolution[Sys_Mag]; SaveSolution[Sys_Mag]; TimeLoopTheta[Mag_Time0, Mag_TimeMax, Mag_DTime[], Mag_Theta[]] { IterativeLoop[NL_NbrMax, NL_Eps, NL_Relax] { GenerateJac[Sys_Mag]; SolveJac[Sys_Mag]; } SaveSolution[Sys_Mag]; } } ... preceded by constant definitions, e.g., Function { NL_Eps = 1.e-4; NL_Relax = 1.; NL_NbrMax = 80; } 7.9.5 Coupled formulations -------------------------- A coupled problem, e.g., magnetodynamic (in frequency domain; 'Frequency Freq') - thermal (in time domain) coupling, with temperature dependent characteristics (e.g., 'rho[{T}]', ...), can be defined by: Resolution { { Name MagnetoThermalCoupling_hphi_T; System { { Name Sys_Mag; NameOfFormulation Magnetodynamics_hphi; Frequency Freq; } { Name Sys_The; NameOfFormulation Thermal_T; } } Operation { InitSolution[Sys_Mag]; InitSolution[Sys_The]; IterativeLoop[NL_NbrMax, NL_Eps, NL_Relax] { GenerateJac[Sys_Mag]; SolveJac[Sys_Mag]; GenerateJac[Sys_The]; SolveJac[Sys_The]; } SaveSolution[Sys_Mag]; SaveSolution[Sys_The]; } } } Two systems of equations, 'Sys_Mag' and 'Sys_The', will be solved iteratively until convergence ('Criterion'), using a relaxation factor ('RelaxationFactor'). It can be seen through these examples that many resolutions can be linked or nested directly by the user, which gives a great freedom for coupled problems. 7.10 'PostProcessing' examples ============================== The quantities to be post-computed based on a solution of a resolution are defined, e.g., for the electrostatic problem (*note Formulation examples::; *note Resolution examples::), for the solution associated with the formulation 'Electrostatics_v', by PostProcessing { { Name EleSta_v; NameOfFormulation Electrostatics_v; Quantity { { Name v; Value { Local { [ {v} ]; In Domain; } } } { Name e; Value { Local { [ -{Grad v} ]; In Domain; } } } { Name d; Value { Local { [ -eps0*epsr[] *{Grad v} ]; In Domain; } } } } } } The electric scalar potential V ('v'), the electric field E ('e') and the electric flux density D ('d') can all be computed from the solution. They are all defined in the region 'Domain'. The quantities for the solution associated with the formulation 'Electrostatics_v_floating' are defined by PostProcessing { { Name EleSta_vf; NameOfFormulation Electrostatics_v_floating; Quantity { ... SAME AS ABOVE ... { Name Q; Value { Local { [ {Q} ]; In SkinDomainC; } } } { Name V; Value { Local { [ {V} ]; In SkinDomainC; } } } } } } which points out the way to define post-quantities based on global quantities. 7.11 'PostOperation' examples ============================= The simplest post-processing operation is the generation of maps of local quantities, i.e., the display of the computed fields on the mesh. For example, using the 'PostProcessing' defined in *note PostProcessing examples::, the maps of the electric scalar potential and of the electric field on the elements of the region 'Domain' are defined as: PostOperation { { Name Map_v_e; NameOfPostProcessing EleSta_v ; Operation { Print [ v, OnElementsOf Domain, File "map_v.pos" ]; Print [ e, OnElementsOf Domain, File "map_e.pos" ]; } } } It is also possible to display local quantities on sections of the mesh, here for example on the plane containing the points (0,0,1), (1,0,1) and (0,1,1): Print [ v, OnSection { {0,0,1} {1,0,1} {0,1,1} }, File "sec_v.pos" ]; Finally, local quantities can also be interpolated on another mesh than the one on which they have been computed. Six types of grids can be specified for this interpolation: a single point, a set of points evenly distributed on a line, a set of points evenly distributed on a plane, a set of points evenly distributed in a box, a set of points defined by a parametric equation, and a set of elements belonging to a different mesh than the original one: Print [ e, OnPoint {0,0,1} ]; Print [ e, OnLine { {0,0,1} {1,0,1} } {125} ]; Print [ e, OnPlane { {0,0,1} {1,0,1} {0,1,1} } {125, 75} ]; Print [ e, OnBox { {0,0,1} {1,0,1} {0,1,1} {0,0,2} } {125, 75, 85} ]; Print [ e, OnGrid {$A, $B, 1} { 0:1:1/125, 0:1:1/75, 0 } ]; Print [ e, OnGrid Domain2 ]; Many options can be used to modify the aspect of all these maps, as well as the default behaviour of the 'Print' commands. See *note Types for PostOperation::, to get the list of all these options. For example, to obtain a map of the scalar potential at the barycenters of the elements on the boundary of the region 'Domain', in a table oriented format appended to an already existing file 'out.txt', the operation would be: Print [ v, OnElementsOf Domain, Depth 0, Skin, Format Table, File >> "out.txt" ]; Global quantities, which are associated with regions (and not with the elements of the mesh of these regions), are displayed thanks to the 'OnRegion' operation. For example, the global potential and charge on the region 'SkinDomainC' can be displayed with: PostOperation { { Name Val_V_Q; NameOfPostProcessing EleSta_vf ; Operation { Print [ V, OnRegion SkinDomainC ]; Print [ Q, OnRegion SkinDomainC ]; } } } 8 Complete examples ******************* This chapter presents complete examples that can be run "as is" with GetDP (*note Running GetDP::). Many other ready-to-use examples are available on the website of the ONELAB project: . 8.1 Electrostatic problem ========================= Let us first consider a simple electrostatic problem. The formulation used is an electric scalar potential formulation (file 'EleSta_v.pro', including files 'Jacobian_Lib.pro' and 'Integration_Lib.pro'). It is applied to a microstrip line (file 'mStrip.pro'), whose geometry is defined in the file 'mStrip.geo' (*note Gmsh examples::). The geometry is two-dimensional and by symmetry only one half of the structure is modeled. SurfInf / / +------------------------------------+ / | | / | Air |/ | | | Line | | / / / | 2D elements in: +-------/---+ / | Air, Diel1 / |- | +-----------+------------------------+ 1D elements in: | Diel1 | Line, Ground, SurfInf | | +------------------------------------+ \ Ground Note that the structure of the following files points out the separation of the data describing the particular problem and the method used to solve it (*note Numerical tools as objects::), and therefore how it is possible to build black boxes adapted to well defined categories of problems. The files are commented (*note Comments::) and can be run without any modification. /* ------------------------------------------------------------------- File "mStrip.pro" This file defines the problem dependent data structures for the microstrip problem. To compute the solution: getdp mStrip -solve EleSta_v To compute post-results: getdp mStrip -pos Map or getdp mStrip -pos Cut ------------------------------------------------------------------- */ Group { /* Let's start by defining the interface (i.e. elementary groups) between the mesh file and GetDP (no mesh object is defined, so the default mesh will be assumed to be in GMSH format and located in "mStrip.msh") */ Air = Region[101]; Diel1 = Region[111]; Ground = Region[120]; Line = Region[121]; SurfInf = Region[130]; /* We can then define a global group (used in "EleSta_v.pro", the file containing the function spaces and formulations) */ DomainCC_Ele = Region[{Air, Diel1}]; } Function { /* The relative permittivity (needed in the formulation) is piecewise defined in elementary groups */ epsr[Air] = 1.; epsr[Diel1] = 9.8; } Constraint { /* Now, some Dirichlet conditions are defined. The name 'ElectricScalarPotential' refers to the constraint name given in the function space */ { Name ElectricScalarPotential; Type Assign; Case { { Region Region[{Ground, SurfInf}]; Value 0.; } { Region Line; Value 1.e-3; } } } } /* The formulation used and its tools, considered as being in a black box, can now be included */ Include "Jacobian_Lib.pro" Include "Integration_Lib.pro" Include "EleSta_v.pro" /* Finally, we can define some operations to output results */ e = 1.e-7; PostOperation { { Name Map; NameOfPostProcessing EleSta_v; Operation { Print [ v, OnElementsOf DomainCC_Ele, File "mStrip_v.pos" ]; Print [ e, OnElementsOf DomainCC_Ele, File "mStrip_e.pos" ]; } } { Name Cut; NameOfPostProcessing EleSta_v; Operation { Print [ e, OnLine {{e,e,0}{10.e-3,e,0}} {500}, File "Cut_e" ]; } } } /* ------------------------------------------------------------------- File "EleSta_v.pro" Electrostatics - Electric scalar potential v formulation ------------------------------------------------------------------- I N P U T --------- Global Groups : (Extension '_Ele' is for Electric problem) ------------- Domain_Ele Whole electric domain (not used) DomainCC_Ele Nonconducting regions DomainC_Ele Conducting regions (not used) Function : -------- epsr[] Relative permittivity Constraint : ---------- ElectricScalarPotential Fixed electric scalar potential (classical boundary condition) Physical constants : ------------------ */ eps0 = 8.854187818e-12; Group { DefineGroup[ Domain_Ele, DomainCC_Ele, DomainC_Ele ]; } Function { DefineFunction[ epsr ]; } FunctionSpace { { Name Hgrad_v_Ele; Type Form0; BasisFunction { // v = v s , for all nodes // n n { Name sn; NameOfCoef vn; Function BF_Node; Support DomainCC_Ele; Entity NodesOf[ All ]; } } Constraint { { NameOfCoef vn; EntityType NodesOf; NameOfConstraint ElectricScalarPotential; } } } } Formulation { { Name Electrostatics_v; Type FemEquation; Quantity { { Name v; Type Local; NameOfSpace Hgrad_v_Ele; } } Equation { Galerkin { [ epsr[] * Dof{d v} , {d v} ]; In DomainCC_Ele; Jacobian Vol; Integration GradGrad; } } } } Resolution { { Name EleSta_v; System { { Name Sys_Ele; NameOfFormulation Electrostatics_v; } } Operation { Generate[Sys_Ele]; Solve[Sys_Ele]; SaveSolution[Sys_Ele]; } } } PostProcessing { { Name EleSta_v; NameOfFormulation Electrostatics_v; Quantity { { Name v; Value { Local { [ {v} ]; In DomainCC_Ele; Jacobian Vol; } } } { Name e; Value { Local { [ -{d v} ]; In DomainCC_Ele; Jacobian Vol; } } } { Name d; Value { Local { [ -eps0*epsr[] * {d v} ]; In DomainCC_Ele; Jacobian Vol; } } } } } } /* ------------------------------------------------------------------- File "Jacobian_Lib.pro" Definition of a jacobian method ------------------------------------------------------------------- I N P U T --------- GlobalGroup : ----------- DomainInf Regions with Spherical Shell Transformation Parameters : ---------- Val_Rint, Val_Rext Inner and outer radius of the Spherical Shell of DomainInf */ Group { DefineGroup[ DomainInf ] ; DefineVariable[ Val_Rint, Val_Rext ] ; } Jacobian { { Name Vol ; Case { { Region DomainInf ; Jacobian VolSphShell {Val_Rint, Val_Rext} ; } { Region All ; Jacobian Vol ; } } } } /* ------------------------------------------------------------------- File "Integration_Lib.pro" Definition of integration methods ------------------------------------------------------------------- */ Integration { { Name GradGrad ; Case { {Type Gauss ; Case { { GeoElement Triangle ; NumberOfPoints 4 ; } { GeoElement Quadrangle ; NumberOfPoints 4 ; } { GeoElement Tetrahedron ; NumberOfPoints 4 ; } { GeoElement Hexahedron ; NumberOfPoints 6 ; } { GeoElement Prism ; NumberOfPoints 9 ; } } } } } { Name CurlCurl ; Case { {Type Gauss ; Case { { GeoElement Triangle ; NumberOfPoints 4 ; } { GeoElement Quadrangle ; NumberOfPoints 4 ; } { GeoElement Tetrahedron ; NumberOfPoints 4 ; } { GeoElement Hexahedron ; NumberOfPoints 6 ; } { GeoElement Prism ; NumberOfPoints 9 ; } } } } } } 8.2 Magnetostatic problem ========================= We now consider a magnetostatic problem. The formulation used is a 2D magnetic vector potential formulation (see file 'MagSta_a_2D.pro'). It is applied to a core-inductor system (file 'CoreSta.pro'), whose geometry is defined in theh file 'Core.geo' (*note Gmsh examples::). The geometry is two-dimensional and, by symmetry, one fourth of the structure is modeled. SurfaceGInf ______ / | -----____/ | \___ |____ AirInf \__ S | ------_ \ u | \ \ r | Air \ \ f | \ \ a | \ | c | | | e +------+ | | G | | | | e | Core | +---+ | | 0 | | |Ind| | | | | | | | | +------+---+---+---------+------+ \ SurfaceGh0 2D elements in: Air, AirInf, Core, Ind 1D elements in: SurfaceGh0, SurfaceGe0, SurfaceGInf (AirInf is a spherical shell corresponding to an infinite region) The jacobian and integration methods used are the same as for the electrostatic problem presented in *note Electrostatic problem::. /* ------------------------------------------------------------------- File "CoreSta.pro" This file defines the problem dependent data structures for the static core-inductor problem. To compute the solution: getdp CoreSta -msh Core.msh -solve MagSta_a_2D To compute post-results: getdp CoreSta -msh Core.msh -pos Map_a ------------------------------------------------------------------- */ Group { Air = Region[ 101 ]; Core = Region[ 102 ]; Ind = Region[ 103 ]; AirInf = Region[ 111 ]; SurfaceGh0 = Region[ 1100 ]; SurfaceGe0 = Region[ 1101 ]; SurfaceGInf = Region[ 1102 ]; Val_Rint = 200.e-3; Val_Rext = 250.e-3; DomainCC_Mag = Region[ {Air, AirInf, Core, Ind} ]; DomainC_Mag = Region[ {} ]; DomainS_Mag = Region[ {Ind} ]; // Stranded inductor DomainInf = Region[ {AirInf} ]; Domain_Mag = Region[ {DomainCC_Mag, DomainC_Mag} ]; } Function { mu0 = 4.e-7 * Pi; murCore = 100.; nu [ Region[{Air, Ind, AirInf}] ] = 1. / mu0; nu [ Core ] = 1. / (murCore * mu0); Sc[ Ind ] = 2.5e-2 * 5.e-2; } Constraint { { Name MagneticVectorPotential_2D; Case { { Region SurfaceGe0 ; Value 0.; } { Region SurfaceGInf; Value 0.; } } } Val_I_1_ = 0.01 * 1000.; { Name SourceCurrentDensityZ; Case { { Region Ind; Value Val_I_1_/Sc[]; } } } } Include "Jacobian_Lib.pro" Include "Integration_Lib.pro" Include "MagSta_a_2D.pro" e = 1.e-5; p1 = {e,e,0}; p2 = {0.12,e,0}; PostOperation { { Name Map_a; NameOfPostProcessing MagSta_a_2D; Operation { Print[ az, OnElementsOf Domain_Mag, File "CoreSta_a.pos" ]; Print[ b, OnLine{{List[p1]}{List[p2]}} {1000}, File "k_a" ]; } } } /* ------------------------------------------------------------------- File "MagSta_a_2D.pro" Magnetostatics - Magnetic vector potential a formulation (2D) ------------------------------------------------------------------- I N P U T --------- GlobalGroup : (Extension '_Mag' is for Magnetic problem) ----------- Domain_Mag Whole magnetic domain DomainS_Mag Inductor regions (Source) Function : -------- nu[] Magnetic reluctivity Constraint : ---------- MagneticVectorPotential_2D Fixed magnetic vector potential (2D) (classical boundary condition) SourceCurrentDensityZ Fixed source current density (in Z direction) */ Group { DefineGroup[ Domain_Mag, DomainS_Mag ]; } Function { DefineFunction[ nu ]; } FunctionSpace { // Magnetic vector potential a (b = curl a) { Name Hcurl_a_Mag_2D; Type Form1P; BasisFunction { // a = a s // e e { Name se; NameOfCoef ae; Function BF_PerpendicularEdge; Support Domain_Mag; Entity NodesOf[ All ]; } } Constraint { { NameOfCoef ae; EntityType NodesOf; NameOfConstraint MagneticVectorPotential_2D; } } } // Source current density js (fully fixed space) { Name Hregion_j_Mag_2D; Type Vector; BasisFunction { { Name sr; NameOfCoef jsr; Function BF_RegionZ; Support DomainS_Mag; Entity DomainS_Mag; } } Constraint { { NameOfCoef jsr; EntityType Region; NameOfConstraint SourceCurrentDensityZ; } } } } Formulation { { Name Magnetostatics_a_2D; Type FemEquation; Quantity { { Name a ; Type Local; NameOfSpace Hcurl_a_Mag_2D; } { Name js; Type Local; NameOfSpace Hregion_j_Mag_2D; } } Equation { Galerkin { [ nu[] * Dof{d a} , {d a} ]; In Domain_Mag; Jacobian Vol; Integration CurlCurl; } Galerkin { [ - Dof{js} , {a} ]; In DomainS_Mag; Jacobian Vol; Integration CurlCurl; } } } } Resolution { { Name MagSta_a_2D; System { { Name Sys_Mag; NameOfFormulation Magnetostatics_a_2D; } } Operation { Generate[Sys_Mag]; Solve[Sys_Mag]; SaveSolution[Sys_Mag]; } } } PostProcessing { { Name MagSta_a_2D; NameOfFormulation Magnetostatics_a_2D; Quantity { { Name a; Value { Local { [ {a} ]; In Domain_Mag; Jacobian Vol; } } } { Name az; Value { Local { [ CompZ[{a}] ]; In Domain_Mag; Jacobian Vol; } } } { Name b; Value { Local { [ {d a} ]; In Domain_Mag; Jacobian Vol; } } } { Name h; Value { Local { [ nu[] * {d a} ]; In Domain_Mag; Jacobian Vol; } } } } } } 8.3 Magnetodynamic problem ========================== As a third example we consider a magnetodynamic problem. The formulation is a two-dimensional a-v formulation (see file 'MagDyn_av_2D.pro', which includes the same jacobian and integration library files as in *note Electrostatic problem::). It is applied to a core-inductor system (defined in file 'CoreMassive.pro'), whose geometry has already been defined in file 'Core.geo'. /* ------------------------------------------------------------------- File "CoreMassive.pro" This file defines the problem dependent data structures for the dynamic core-inductor problem. To compute the solution: getdp CoreMassive -msh Core.msh -solve MagDyn_av_2D To compute post-results: getdp CoreMassive -msh Core.msh -pos Map_a getdp CoreMassive -msh Core.msh -pos U_av ------------------------------------------------------------------- */ Group { Air = Region[ 101 ]; Core = Region[ 102 ]; Ind = Region[ 103 ]; AirInf = Region[ 111 ]; SurfaceGh0 = Region[ 1100 ]; SurfaceGe0 = Region[ 1101 ]; SurfaceGInf = Region[ 1102 ]; Val_Rint = 200.e-3; Val_Rext = 250.e-3; DomainCC_Mag = Region[ {Air, AirInf} ]; DomainC_Mag = Region[ {Ind, Core} ]; // Massive inductor + conducting core DomainB_Mag = Region[ {} ]; DomainS_Mag = Region[ {} ]; DomainInf = Region[ {AirInf} ]; Domain_Mag = Region[ {DomainCC_Mag, DomainC_Mag} ]; } Function { mu0 = 4.e-7 * Pi; murCore = 100.; nu [ #{Air, Ind, AirInf} ] = 1. / mu0; nu [ Core ] = 1. / (murCore * mu0); sigma [ Ind ] = 5.9e7; sigma [ Core ] = 2.5e7; Freq = 1.; } Constraint { { Name MagneticVectorPotential_2D; Case { { Region SurfaceGe0 ; Value 0.; } { Region SurfaceGInf; Value 0.; } } } { Name SourceCurrentDensityZ; Case { } } Val_I_ = 0.01 * 1000.; { Name Current_2D; Case { { Region Ind; Value Val_I_; } } } { Name Voltage_2D; Case { { Region Core; Value 0.; } } } } Include "Jacobian_Lib.pro" Include "Integration_Lib.pro" Include "MagDyn_av_2D.pro" PostOperation { { Name Map_a; NameOfPostProcessing MagDyn_av_2D; Operation { Print[ az, OnElementsOf Domain_Mag, File "Core_m_a.pos" ]; Print[ j, OnElementsOf Domain_Mag, File "Core_m_j.pos" ]; } } { Name U_av; NameOfPostProcessing MagDyn_av_2D; Operation { Print[ U, OnRegion Ind ]; Print[ I, OnRegion Ind ]; } } } /* ------------------------------------------------------------------- File "MagDyn_av_2D.pro" Magnetodynamics - Magnetic vector potential and electric scalar potential a-v formulation (2D) ------------------------------------------------------------------- I N P U T --------- GlobalGroup : (Extension '_Mag' is for Magnetic problem) ----------- Domain_Mag Whole magnetic domain DomainCC_Mag Nonconducting regions (not used) DomainC_Mag Conducting regions DomainS_Mag Inductor regions (Source) DomainV_Mag All regions in movement (for speed term) Function : -------- nu[] Magnetic reluctivity sigma[] Electric conductivity Velocity[] Velocity of regions Constraint : ---------- MagneticVectorPotential_2D Fixed magnetic vector potential (2D) (classical boundary condition) SourceCurrentDensityZ Fixed source current density (in Z direction) Voltage_2D Fixed voltage Current_2D Fixed Current Parameters : ---------- Freq Frequency (Hz) Parameters for time loop with theta scheme : Mag_Time0, Mag_TimeMax, Mag_DTime Initial time, Maximum time, Time step (s) Mag_Theta Theta (e.g. 1. : Implicit Euler, 0.5 : Cranck Nicholson) */ Group { DefineGroup[ Domain_Mag, DomainCC_Mag, DomainC_Mag, DomainS_Mag, DomainV_Mag ]; } Function { DefineFunction[ nu, sigma ]; DefineFunction[ Velocity ]; DefineVariable[ Freq ]; DefineVariable[ Mag_Time0, Mag_TimeMax, Mag_DTime, Mag_Theta ]; } FunctionSpace { // Magnetic vector potential a (b = curl a) { Name Hcurl_a_Mag_2D; Type Form1P; BasisFunction { // a = a s // e e { Name se; NameOfCoef ae; Function BF_PerpendicularEdge; Support Domain_Mag; Entity NodesOf[ All ]; } } Constraint { { NameOfCoef ae; EntityType NodesOf; NameOfConstraint MagneticVectorPotential_2D; } } } // Gradient of Electric scalar potential (2D) { Name Hregion_u_Mag_2D; Type Form1P; BasisFunction { { Name sr; NameOfCoef ur; Function BF_RegionZ; Support DomainC_Mag; Entity DomainC_Mag; } } GlobalQuantity { { Name U; Type AliasOf ; NameOfCoef ur; } { Name I; Type AssociatedWith; NameOfCoef ur; } } Constraint { { NameOfCoef U; EntityType Region; NameOfConstraint Voltage_2D; } { NameOfCoef I; EntityType Region; NameOfConstraint Current_2D; } } } // Source current density js (fully fixed space) { Name Hregion_j_Mag_2D; Type Vector; BasisFunction { { Name sr; NameOfCoef jsr; Function BF_RegionZ; Support DomainS_Mag; Entity DomainS_Mag; } } Constraint { { NameOfCoef jsr; EntityType Region; NameOfConstraint SourceCurrentDensityZ; } } } } Formulation { { Name Magnetodynamics_av_2D; Type FemEquation; Quantity { { Name a ; Type Local ; NameOfSpace Hcurl_a_Mag_2D; } { Name ur; Type Local ; NameOfSpace Hregion_u_Mag_2D; } { Name I ; Type Global; NameOfSpace Hregion_u_Mag_2D [I]; } { Name U ; Type Global; NameOfSpace Hregion_u_Mag_2D [U]; } { Name js; Type Local ; NameOfSpace Hregion_j_Mag_2D; } } Equation { Galerkin { [ nu[] * Dof{d a} , {d a} ]; In Domain_Mag; Jacobian Vol; Integration CurlCurl; } Galerkin { DtDof [ sigma[] * Dof{a} , {a} ]; In DomainC_Mag; Jacobian Vol; Integration CurlCurl; } Galerkin { [ sigma[] * Dof{ur} , {a} ]; In DomainC_Mag; Jacobian Vol; Integration CurlCurl; } Galerkin { [ - sigma[] * (Velocity[] *^ Dof{d a}) , {a} ]; In DomainV_Mag; Jacobian Vol; Integration CurlCurl; } Galerkin { [ - Dof{js} , {a} ]; In DomainS_Mag; Jacobian Vol; Integration CurlCurl; } Galerkin { DtDof [ sigma[] * Dof{a} , {ur} ]; In DomainC_Mag; Jacobian Vol; Integration CurlCurl; } Galerkin { [ sigma[] * Dof{ur} , {ur} ]; In DomainC_Mag; Jacobian Vol; Integration CurlCurl; } GlobalTerm { [ Dof{I} , {U} ]; In DomainC_Mag; } } } } Resolution { { Name MagDyn_av_2D; System { { Name Sys_Mag; NameOfFormulation Magnetodynamics_av_2D; Type ComplexValue; Frequency Freq; } } Operation { Generate[Sys_Mag]; Solve[Sys_Mag]; SaveSolution[Sys_Mag]; } } { Name MagDyn_t_av_2D; System { { Name Sys_Mag; NameOfFormulation Magnetodynamics_av_2D; } } Operation { InitSolution[Sys_Mag]; SaveSolution[Sys_Mag]; TimeLoopTheta[Mag_Time0, Mag_TimeMax, Mag_DTime, Mag_Theta] { Generate[Sys_Mag]; Solve[Sys_Mag]; SaveSolution[Sys_Mag]; } } } } PostProcessing { { Name MagDyn_av_2D; NameOfFormulation Magnetodynamics_av_2D; Quantity { { Name a; Value { Local { [ {a} ]; In Domain_Mag; Jacobian Vol; } } } { Name az; Value { Local { [ CompZ[{a}] ]; In Domain_Mag; Jacobian Vol; } } } { Name b; Value { Local { [ {d a} ]; In Domain_Mag; Jacobian Vol; } } } { Name h; Value { Local { [ nu[] * {d a} ]; In Domain_Mag; Jacobian Vol; } } } { Name j; Value { Local { [ - sigma[]*(Dt[{a}]+{ur}) ]; In DomainC_Mag; Jacobian Vol; } } } { Name jz; Value { Local { [ - sigma[]*CompZ[Dt[{a}]+{ur}] ]; In DomainC_Mag; Jacobian Vol; } } } { Name roj2; Value { Local { [ sigma[]*SquNorm[Dt[{a}]+{ur}] ]; In DomainC_Mag; Jacobian Vol; } } } { Name U; Value { Local { [ {U} ]; In DomainC_Mag; } } } { Name I; Value { Local { [ {I} ]; In DomainC_Mag; } } } } } } Appendix A File formats *********************** This chapter describes the file formats that cannot be modified by the user. The format of the problem definition structure is explained in *note Objects::, and *note Types for objects::. The format of the post-processing files is explained in *note Types for PostOperation::. A.1 Input file format ===================== The native mesh format read by GetDP is the mesh file format produced by Gmsh (). In its "version 1" incarnation, an 'msh' file is divided into two sections, defining the nodes and the elements in the mesh. $NOD NUMBER-OF-NODES NODE-NUMBER X-COORD Y-COORD Z-COORD ... $ENDNOD $ELM NUMBER-OF-ELEMENTS ELM-NUMBER ELM-TYPE ELM-REGION UNUSED NUMBER-OF-NODES NODE-NUMBERS ... $ENDELM All the syntactic variables stand for integers except X-COORD, Y-COORD and Z-COORD which stand for floating point values. The ELM-TYPE value defines the geometrical type for the element: ELM-TYPE: '1' Line (2 nodes, 1 edge). '2' Triangle (3 nodes, 3 edges). '3' Quadrangle (4 nodes, 4 edges). '4' Tetrahedron (4 nodes, 6 edges, 4 facets). '5' Hexahedron (8 nodes, 12 edges, 6 facets). '6' Prism (6 nodes, 9 edges, 5 facets). '7' Pyramid (5 nodes, 8 edges, 5 facets). '15' Point (1 node). GetDP can also read more recent versions of the 'msh' format (2.0 and above), as well as binary meshes. See the Gmsh documentation for more information about these formats. A.2 Output file format ====================== A.2.1 File '.pre' ----------------- The '.pre' file is generated by the pre-processing stage. It contains all the information about the degrees of freedom to be considered during the processing stage for a given resolution (i.e., unknowns, fixed values, initial values, etc.). $Resolution /* 'RESOLUTION-ID' */ MAIN-RESOLUTION-NUMBER NUMBER-OF-DOFDATA $EndResolution $DofData /* #DOFDATA-NUMBER */ RESOLUTION-NUMBER SYSTEM-NUMBER NUMBER-OF-FUNCTION-SPACES FUNCTION-SPACE-NUMBER ... NUMBER-OF-TIME-FUNCTIONS TIME-FUNCTION-NUMBER ... NUMBER-OF-PARTITIONS PARTITION-INDEX ... NUMBER-OF-ANY-DOF NUMBER-OF-DOF DOF-BASIS-FUNCTION-NUMBER DOF-ENTITY DOF-HARMONIC DOF-TYPE DOF-DATA ... $EndDofData ... with DOF-DATA: EQUATION-NUMBER NNZ (DOF-TYPE: 1; UNKNOWN) | DOF-VALUE DOF-TIME-FUNCTION-NUMBER (DOF-TYPE: 2; FIXED VALUE) | DOF-ASSOCIATE-DOF-NUMBER DOF-VALUE DOF-TIME-FUNCTION-NUMBER (DOF-TYPE: 3; ASSOCIATED DEGREE OF FREEDOM) | EQUATION-NUMBER DOF-VALUE (DOF-TYPE: 5; INITIAL VALUE FOR AN UNKNOWN) Notes: 1. There is one '$DofData' field for each system of equations considered in the resolution (including those considered in pre-resolutions). 2. The DOFDATA-NUMBER of a '$DofData' field is determined by the order of this field in the '.pre' file. 3. NUMBER-OF-DOF is the dimension of the considered system of equations, while NUMBER-OF-ANY-DOF is the total number of degrees of freedom before the application of constraints. 4. Each degree of freedom is coded with three integer values, which are the associated basis function, entity and harmonic numbers, i.e., DOF-BASIS-FUNCTION-NUMBER, DOF-ENTITY and DOF-HARMONIC. 5. NNZ is not used at the moment. A.2.2 File '.res' ----------------- The '.res' file is generated by the processing stage. It contains the solution of the problem (or a part of it in case of program interruption). $ResFormat /* GetDP vGETDP-VERSION-NUMBER, STRING-FOR-FORMAT */ 1.1 FILE-RES-FORMAT $EndResFormat $Solution /* DofData #DOFDATA-NUMBER */ DOFDATA-NUMBER TIME-VALUE TIME-IMAG-VALUE TIME-STEP-NUMBER SOLUTION-VALUE ... $EndSolution ... Notes: 1. A '$Solution' field contains the solution associated with a '$DofData' field. 2. There is one '$Solution' field for each time step, of which the time is TIME-VALUE (0 for non time dependent or non modal analyses) and the imaginary time is TIME-IMAG-VALUE (0 for non time dependent or non modal analyses). 3. The order of the SOLUTION-VALUEs in a '$Solution' field follows the numbering of the equations given in the '.pre' file (one floating point value for each degree of freedom). Appendix B Gmsh examples ************************ Gmsh is a three-dimensional finite element mesh generator with simple CAD and post-processing capabilities that can be used as a graphical front-end for GetDP. Gmsh can be downloaded from . This appendix reproduces verbatim the input files needed by Gmsh to produce the mesh files 'mStrip.msh' and 'Core.msh' used in the examples of *note Complete examples::. /* ------------------------------------------------------------------- File "mStrip.geo" This file is the geometrical description used by GMSH to produce the file "mStrip.msh". ------------------------------------------------------------------- */ /* Definition of some parameters for geometrical dimensions, i.e. h (height of 'Diel1'), w (width of 'Line'), t (thickness of 'Line') xBox (width of the air box) and yBox (height of the air box) */ h = 1.e-3 ; w = 4.72e-3 ; t = 0.035e-3 ; xBox = w/2. * 6. ; yBox = h * 12. ; /* Definition of parameters for local mesh dimensions */ s = 1. ; p0 = h / 10. * s ; pLine0 = w/2. / 10. * s ; pLine1 = w/2. / 50. * s ; pxBox = xBox / 10. * s ; pyBox = yBox / 8. * s ; /* Definition of gemetrical points */ Point(1) = { 0 , 0, 0, p0} ; Point(2) = { xBox, 0, 0, pxBox} ; Point(3) = { xBox, h, 0, pxBox} ; Point(4) = { 0 , h, 0, pLine0} ; Point(5) = { w/2., h, 0, pLine1} ; Point(6) = { 0 , h+t, 0, pLine0} ; Point(7) = { w/2., h+t, 0, pLine1} ; Point(8) = { 0 , yBox, 0, pyBox} ; Point(9) = { xBox, yBox, 0, pyBox} ; /* Definition of gemetrical lines */ Line(1) = {1,2}; Line(2) = {2,3}; Line(3) = {3,9}; Line(4) = {9,8}; Line(5) = {8,6}; Line(7) = {4,1}; Line(8) = {5,3}; Line(9) = {4,5}; Line(10) = {6,7}; Line(11) = {5,7}; /* Definition of geometrical surfaces */ Line Loop(12) = {8,-2,-1,-7,9}; Plane Surface(13) = {12}; Line Loop(14) = {10,-11,8,3,4,5}; Plane Surface(15) = {14}; /* Definition of Physical entities (surfaces, lines). The Physical entities tell GMSH the elements and their associated region numbers to save in the file 'mStrip.msh'. For example, the Region 111 is made of elements of surface 13, while the Region 121 is made of elements of lines 9, 10 and 11 */ Physical Surface (101) = {15} ; /* Air */ Physical Surface (111) = {13} ; /* Diel1 */ Physical Line (120) = {1} ; /* Ground */ Physical Line (121) = {9,10,11} ; /* Line */ Physical Line (130) = {2,3,4} ; /* SurfInf */ /* ------------------------------------------------------------------- File "Core.geo" This file is the geometrical description used by GMSH to produce the file "Core.msh". ------------------------------------------------------------------- */ dxCore = 50.e-3; dyCore = 100.e-3; xInd = 75.e-3; dxInd = 25.e-3; dyInd = 50.e-3; rInt = 200.e-3; rExt = 250.e-3; s = 1.; p0 = 12.e-3 *s; pCorex = 4.e-3 *s; pCorey0 = 8.e-3 *s; pCorey = 4.e-3 *s; pIndx = 5.e-3 *s; pIndy = 5.e-3 *s; pInt = 12.5e-3*s; pExt = 12.5e-3*s; Point(1) = {0,0,0,p0}; Point(2) = {dxCore,0,0,pCorex}; Point(3) = {dxCore,dyCore,0,pCorey}; Point(4) = {0,dyCore,0,pCorey0}; Point(5) = {xInd,0,0,pIndx}; Point(6) = {xInd+dxInd,0,0,pIndx}; Point(7) = {xInd+dxInd,dyInd,0,pIndy}; Point(8) = {xInd,dyInd,0,pIndy}; Point(9) = {rInt,0,0,pInt}; Point(10) = {rExt,0,0,pExt}; Point(11) = {0,rInt,0,pInt}; Point(12) = {0,rExt,0,pExt}; Line(1) = {1,2}; Line(2) = {2,5}; Line(3) = {5,6}; Line(4) = {6,9}; Line(5) = {9,10}; Line(6) = {1,4}; Line(7) = {4,11}; Line(8) = {11,12}; Line(9) = {2,3}; Line(10) = {3,4}; Line(11) = {6,7}; Line(12) = {7,8}; Line(13) = {8,5}; Circle(14) = {9,1,11}; Circle(15) = {10,1,12}; Line Loop(16) = {-6,1,9,10}; Plane Surface(17) = {16}; Line Loop(18) = {11,12,13,3}; Plane Surface(19) = {18}; Line Loop(20) = {7,-14,-4,11,12,13,-2,9,10}; Plane Surface(21) = {20}; Line Loop(22) = {8,-15,-5,14}; Plane Surface(23) = {22}; Physical Surface(101) = {21}; /* Air */ Physical Surface(102) = {17}; /* Core */ Physical Surface(103) = {19}; /* Ind */ Physical Surface(111) = {23}; /* AirInf */ Physical Line(1000) = {1,2}; /* Cut */ Physical Line(1001) = {2}; /* CutAir */ Physical Line(202) = {9,10}; /* SkinCore */ Physical Line(203) = {11,12,13}; /* SkinInd */ Physical Line(1100) = {1,2,3,4,5}; /* SurfaceGh0 */ Physical Line(1101) = {6,7,8}; /* SurfaceGe0 */ Physical Line(1102) = {15}; /* SurfaceGInf */ Appendix C Compiling the source code ************************************ Stable releases and source snapshots are available from . You can also access the Git repository directly: 1. The first time you want to download the latest full source, type: git clone 2. To update your local version to the latest and greatest, go in the getdp directory and type: git pull Once you have the source code, you need to run CMake to configure your build (see the README.txt (http://gitlab.onelab.info/getdp/getdp/tree/master/README.txt) file in the top-level source directory for detailed information on how to run CMake). Each build can be configured using a series of options, to selectively enable optional modules or features. Here is the list of CMake options: 'ENABLE_ARPACK' Enable Arpack eigensolver (requires Fortran) (default: ON) 'ENABLE_BLAS_LAPACK' Enable BLAS/Lapack for linear algebra (e.g. for Arpack) (default: ON) 'ENABLE_BUILD_LIB' Enable 'lib' target for building static GetDP library (default: OFF) 'ENABLE_BUILD_SHARED' Enable 'shared' target for building shared GetDP library (default: OFF) 'ENABLE_BUILD_DYNAMIC' Enable dynamic GetDP executable (linked with shared lib) (default: OFF) 'ENABLE_BUILD_ANDROID' Enable Android NDK library target (experimental) (default: OFF) 'ENABLE_BUILD_IOS' Enable iOS (ARM) library target (experimental) (default: OFF) 'ENABLE_FORTRAN' Enable Fortran (needed for Arpack/Sparskit/Zitsol & Bessel) (default: ON) 'ENABLE_GMSH' Enable Gmsh functions (for field interpolation) (default: ON) 'ENABLE_GSL' Enable GSL functions (for some built-in functions) (default: ON) 'ENABLE_KERNEL' Enable kernel (required for actual computations) (default: ON) 'ENABLE_MMA' Enable MMA optimizer (default: ON) 'ENABLE_MPI' Enable MPI parallelization (with PETSc/SLEPc) (default: OFF) 'ENABLE_MULTIHARMONIC' Enable multi-harmonic support (default: OFF) 'ENABLE_NR' Enable NR functions (if GSL is unavailable) (default: ON) 'ENABLE_NX' Enable proprietary NX extension (default: OFF) 'ENABLE_OCTAVE' Enable Octave functions (default: OFF) 'ENABLE_OPENMP' Enable OpenMP parallelization of some functions (experimental) (default: OFF) 'ENABLE_PETSC' Enable PETSc linear solver (default: ON) 'ENABLE_PRIVATE_API' Enable private API (default: OFF) 'ENABLE_PYTHON' Enable Python functions (default: ON) 'ENABLE_SLEPC' Enable SLEPc eigensolver (default: ON) 'ENABLE_SMALLFEM' Enable experimental SmallFem assembler (default: OFF) 'ENABLE_SPARSKIT' Enable Sparskit solver instead of PETSc (requires Fortran) (default: ON) 'ENABLE_SYSTEM_CONTRIB' Use system versions of contrib libraries, when possible (default: OFF) 'ENABLE_PEWE' Enable PeWe exact solutions (requires Fortran) (default: ON) 'ENABLE_WRAP_PYTHON' Build Python wrappers (default: OFF) 'ENABLE_ZITSOL' Enable Zitsol solvers (requires PETSc and Fortran) (default: OFF) Appendix D Frequently asked questions ************************************* D.1 The basics ============== 1. What is GetDP? GetDP is a scientific software environment for the numerical solution of integro-differential equations, open to the coupling of physical problems (electromagnetic, thermal, mechanical, etc) as well as of numerical methods (finite element method, integral methods, etc). It can deal with such problems of various dimensions (1D, 2D, 2D axisymmetric or 3D) and time states (static, transient or harmonic). The main feature of GetDP is the closeness between the organization of data defining discrete problems (written by the user in ASCII data files) and the symbolic mathematical expressions of these problems. 2. What are the terms and conditions of use? GetDP is distributed under the terms of the GNU General Public License. See *note License:: for more information. 3. What does 'GetDP' mean? It's an acronym for a "General environment for the treatment of Discrete Problems". 4. Where can I find more information? is the primary location to obtain information about GetDP. There you will for example find the complete reference manual and the bug tracking database (https://gitlab.onelab.info/getdp/getdp/issues). D.2 Installation ================ 1. Which OSes does GetDP run on? Gmsh runs on Windows, MacOS X, Linux and most Unix variants. 2. What do I need to compile GetDP from the sources? You need a C++ and a Fortran compiler as well as the GSL (version 1.2 or higher; freely available from ). 3. How do I compile GetDP? You need cmake () and a C++ compiler (and a Fortran compiler depending on the modules/solvers you want to compile). See *note Compiling the source code:: and the README.txt (http://gitlab.onelab.info/getdp/getdp/tree/master/README.txt) file in the top-level source directory for more information. 4. GetDP [from a binary distribution] complains about missing libraries. Try 'ldd getdp' (or 'otool -L getdp' on MacOS X) to check if all the required shared libraries are installed on your system. If not, install them. If it still doesn't work, recompile GetDP from the sources. D.3 Usage ========= 1. How can I provide a mesh to GetDP? The only meshing format accepted by this version of GetDP is the 'msh' format created by Gmsh . This format being very simple (see the Gmsh reference manual for more details), it should be straightforward to write a converter from your mesh format to the 'msh' format. 2. How can I visualize the results produced by GetDP? You can specify a format in all post-processing operations. Available formats include 'Table', 'SimpleTable', 'TimeTable' and 'Gmsh'. 'Table', 'SimpleTable' and 'TimeTable' output lists of numbers easily readable by Excel/gnuplot/Caleida Graph/etc. 'Gmsh' outputs post-processing views directly loadable by Gmsh. 3. How do I change the linear solver used by GetDP? It depends on which linear solver toolkit was enabled when GetDP was compiled (PETSc or Sparskit). With PETSc-based linear solvers you can either specify options on the command line (e.g. with '-ksp_type gmres -pc_type ilu'), through a specific option file (with '-solver file'), through the '.petscrc' file located in your home directly, or directly in the 'Resolution' field using the 'SetGlobalSolverOptions[]' command. With Sparskit-based linear solvers can either specify options directly on command line (e.g. with '-Nb_Fill 200'), specify an option file explicitly (with '-solver file'), or edit the 'solver.par' file in the current working directory. If no 'solver.par' file exists in the current directory, GetDP will give create it the next time you perform a linear system solution. Appendix E Tips and tricks ************************** * Install the 'info' version of this user's guide! On your (Unix) system, this can be achieved by 1) copying all getdp.info* files to the place where your info files live (usually /usr/info), and 2) issuing the command 'install-info /usr/info/getdp.info /usr/info/dir'. You will then be able to access the documentation with the command 'info getdp'. Note that particular sections ("nodes") can be accessed directly. For example, 'info getdp functionspace' will take you directly to the definition of the FunctionSpace object. * Use emacs to edit your files, and load the C++ mode! This permits automatic syntax highlighting and easy indentation. Automatic loading of the C++ mode for '.pro' files can be achieved by adding the following command in your '.emacs' file: '(setq auto-mode-alist (append '(("\\.pro$" . c++-mode)) auto-mode-alist))'. * Define integration and Jacobian method in separate files, reusable in all your problem definition structures (*note Includes::). Define meshes, groups, functions and constraints in one file dependent of the geometrical model, and function spaces, formulations, resolutions and post-processings in files independent of the geometrical model. * Use 'All' as soon as possible in the definition of topological entities used as 'Entity' of 'BasisFunction's. This will prevent GetDP from constructing unnecessary lists of entities. * Intentionally misspelling an object type in the problem definition structure will produce an error message listing all available types in the particular context. * If you don't specify the mandatory arguments on the command line, GetDP will give you the available choices. For example, 'getdp test -pos' (the name of the PostOperation is missing) will produce an error message listing all available PostOperations. Appendix F Version history ************************** 3.6.0 (Work-in-progress): new functions ValueFromFile and ReadTable; improved support for high-order meshes; improved parsing speed of .pro files with many functions and groups; new -sparsity option to use exact sparsity pattern for PETSc matrices; bug fixes (SaveMesh, adaptive time stepping with MPI). 3.5.0 (May 13, 2022): generalized Trace operator on non-conforming meshes; new Errf function; source code reorganization. 3.4.0 (September 23, 2021): new Min and Max functions on constants (at parse time); fixed regression in trees of edges in 2D; added support for non-ASCII paths on command line on Windows; GetDP now requires C++11 and CMake 3.3; small bug fixes. 3.3.0 (December 21, 2019): improved support for curved elements; added support for auto-similar trees of edges (e.g. for sliding surfaces in 3D); update for latest Gmsh version. 3.2.0 (July 1, 2019): improved node and edge link constraints search using rtree; added support for BF_Edge basis functions on curved elements; small fixes. 3.1.0 (April 19, 2019): added support for high-order (curved) Lagrange elements (P2, P3 and P4); added support for latest Gmsh version; code refactoring. 3.0.4 (December 9, 2018): allow general groups in Jacobian definitions; fixed string parser regression. 3.0.3 (October 18, 2018): new AtGaussPoint PostOperation option; bug fixes. 3.0.2 (September 10, 2018): small compilation fixes. 3.0.1 (September 7, 2018): small bug fixes. 3.0.0 (August 22, 2018): new extrapolation (see SetExtrapolationOrder) in time-domain resolutions; new string macros; added support for Gmsh MSH4 file format; new file handling operations and ElementTable format in PostOperation; added support for curved (2nd order) simplices; enhanced communication of post-processing data with ONELAB; many new functions (Atanh, JnSph, YnSph, ValueFromTable, ListFromServer, GroupExists, ...); various small bug fixes. 2.11.3 (November 5, 2017): new 'Eig' operator for general eigenvalue problems (polynomial, rational); small improvements and bug fixes. 2.11.2 (June 23, 2017): minor build system changes. 2.11.1 (May 13, 2017): small bug fixes and improvements. 2.11.0 (January 3, 2017): small improvements (complex math functions, mutual terms, one side of, get/save runtime variables) and bug fixes. 2.10.0 (October 9, 2016): ONELAB 1.3 with usability and performance improvements. 2.9.2 (August 21, 2016): small bug fixes. 2.9.1 (August 18, 2016): small improvements (CopySolution[], -cpu) and bug fixes. 2.9.0 (July 11, 2016): new ONELAB 1.2 protocol with native support for lists; simple C++ and Python API for exchanging (lists of) numbers and strings; extended .pro language for the construction of extensible problem definitions ("Append"); new VolCylShell transformation; new functions (Min, Max, SetDTime, ...); small fixes. 2.8.0 (March 5, 2016): new Parse[], {Set,Get}{Number,String}[] and OnPositiveSideOf commands; added support for lists of strings; various improvements and bug fixes for better interactive use with ONELAB. 2.7.0 (November 7, 2015): new Else/ElseIf commands; new timing and memory reporting functions. 2.6.1 (July 30, 2015): enhanced Print[] command; minor fixes. 2.6.0 (July 21, 2015): new ability to define and use Macros in .pro files; new run-time variables (act as registers, but with user-defined names starting with '$') and run-time ONELAB Get/Set functions; new Append*ToFileName PostOperation options; new GetResdidual and associated operations; fixes and extended format support in MSH file reader; fixed UpdateConstraint for complex-simulated-real and multi-harmonic calculations. 2.5.1 (April 18, 2015): enhanced Python[] and DefineFunction[]. 2.5.0 (March 12, 2015): added option to embed Octave and Python interpreters; extended "Field" functions with gradient; extended string and list handling functions; new resolution and postprocessing functions (RenameFile, While, ...); extended EigenSolve with eigenvalue filter and high order polynomial EV problems; small bug fixes. 2.4.4 (July 9, 2014): better stability, updated onelab API version and inline parameter definitions, fixed UpdateConstraint in harmonic case, improved performance of multi-harmonic assembly, fixed memory leak in parallel MPI version, improved EigenSolve (quadratic EVP with SLEPC, EVP on real matrices), new CosineTransform, MPI_Printf, SendMergeFileRequest parser commands, small improvements and bug fixes. 2.4.3 (February 7, 2014): new mandatory 'Name' attribute to define onelab variables in DefineConstant[] & co; minor bug fixes. 2.4.2 (Septembre 27, 2013): fixed function arguments in nested expressions; minor improvements. 2.4.1 (July 16, 2013): minor improvements and bug fixes. 2.4.0 (July 9, 2013): new two-step Init constraints; faster network computation (with new -cache); improved Update operation; better cpu/memory reporting; new -setnumber, -setstring and -gmshread command line options; accept unicode file paths on Windows; small bug fixes. 2.3.1 (May 11, 2013): updated onelab; small bug fixes. 2.3.0 (March 9, 2013): moved build system from autoconf to cmake; new family of Field functions to use data imported from Gmsh; improved list handling; general code cleanup. 2.2.1 (July 15, 2012): cleaned up nonlinear convergence tests and integrated experimental adaptive time loop code; small bug fixes. 2.2.0 (June 19, 2012): new solver interface based on ONELAB; parallel SLEPC eigensolvers; cleaned up syntax for groups, moving band and global basis functions; new Field[] functions to interpolate post-processing datasets from Gmsh; fixed bug in Sur/Lin transformation of 2 forms; fixed bug for periodic constraints on high-order edge elements. 2.1.1 (April 12, 2011): default direct solver using MUMPS. 2.1.0 (October 24, 2010): parallel resolution using PETSc solvers; new Gmsh2 output format; new experimental SLEPc-based eigensolvers; various bug and performance fixes (missing face basis functions, slow PETSc assembly with global quantities, ...) 2.0.0 (March 16, 2010): general code cleanup (separated interface from kernel code; removed various undocumented, unstable and otherwise experimental features; moved to C++); updated input file formats; default solvers are now based on PETSc; small bug fixes (binary .res read, Newmark -restart). 1.2.1 (March 18, 2006): Small fixes. 1.2.0 (March 10, 2006): Windows versions do not depend on Cygwin anymore; major parser cleanup (loops & co). 1.1.2 (September 3, 2005): Small fixes. 1.1.0 (August 21, 2005): New eigensolver based on Arpack (EigenSolve); generalized old Lanczos solver to work with GSL+lapack; reworked PETSc interface, which now requires PETSc 2.3; documented many previously undocumented features (loops, conditionals, strings, link constraints, etc.); various improvements and bug fixes. 1.0.1 (February 6, 2005): Small fixes. 1.0.0 (April 24, 2004): New license (GNU GPL); added support for latest Gmsh mesh file format; more code cleanups. 0.91: Merged moving band and multi-harmonic code; new loops and conditionals in the parser; removed old readline code (just use GNU readline if available); upgraded to latest Gmsh post-processing format; various small enhancements and bug fixes. 0.89 (March 26, 2003): Code cleanup. 0.88: Integrated FMM code. 0.87: Fixed major performance problem on Windows (matrix assembly and post-processing can be up to 3-4 times faster with 0.87 compared to 0.86, bringing performance much closer to Unix versions); fixed stack overflow on Mac OS X; Re-introduced face basis functions mistakenly removed in 0.86; fixed post-processing bug with pyramidal basis functions; new build system based on autoconf. 0.86 (January 25, 2003): Updated Gmsh output format; many small bug fixes. 0.85 (January 21, 2002): Upgraded communication interface with Gmsh; new ChangeOfValues option in PostOperation; many internal changes. 0.84 (September 6, 2001): New ChangeOfCoordinate option in PostOperation; fixed crash in InterpolationAkima; improved interactive postprocessing (-ipos); changed syntax of parametric OnGrid ($S, $T -> $A, $B, $C); corrected Skin for non simplicial meshes; fixed floating point exception in diagonal matrix scaling; many other small fixes and cleanups. 0.83: Fixed bugs in SaveSolutions[] and InitSolution[]; fixed corrupted binary post-processing files in the harmonic case for the Gmsh format; output files are now created relatively to the input file directory; made solver options available on the command line; added optional matrix scaling and changed default parameter file name to 'solver.par' (Warning: please check the scaling definition in your old SOLVER.PAR files); generalized syntax for lists (start:[incr]end -> start:end:incr); updated reference guide; added a new short presentation on the web site; OnCut -> OnSection; new functional syntax for resolution operations (e.g. Generate X -> Generate[X]); many other small fixes and cleanups. 0.82: Added communication socket for interactive use with Gmsh; corrected (again) memory problem (leak + seg. fault) in time stepping schemes; corrected bug in Update[]. 0.81: Generalization of transformation jacobians (spherical and rectangular, with optional parameters); changed handling of missing command line arguments; enhanced Print OnCut; fixed memory leak for time domain analysis of coupled problems; -name option; fixed seg. fault in ILUK. 0.80: Fixed computation of time derivatives on first time step (in post-processing); added tolerance in transformation jacobians; fixed parsing of DOS files (carriage return problems); automatic memory reallocation in ILUD/ILUK. 0.79: Various bug fixes (mainly for the post-processing of intergal quantities); automatic treatment of degenerated cases in axisymmetrical problems. 0.78: Various bug fixes. 0.77: Changed syntax for PostOperations (Plot suppressed in favour of Print; Plot OnRegion becomes Print OnElementsOf); changed table oriented post-processing formats; new binary formats; new error diagnostics. 0.76: Reorganized high order shape functions; optimization of the post-processing (faster and less bloated); lots of internal cleanups. 0.74: High order shape functions; lots of small bug fixes. 0.73: Eigen value problems (Lanczos); minor corrections. 0.7: constraint syntax; fourier transform; unary minus correction; complex integral quantity correction; separate iteration matrix generation. 0.6: Second order time derivatives; Newton nonlinear scheme; Newmark time stepping scheme; global quantity syntax; interactive post-processing; tensors; integral quantities; post-processing facilities. 0.3: First distributed version. Appendix G Copyright and credits ******************************** GetDP is copyright (C) 1997-2022 Patrick Dular and Christophe Geuzaine University of Liege Major code contributions to GetDP have been provided by Johan Gyselinck, Ruth Sabariego, Michael Asam, Bertrand Thierry, Francois Henrotte, Guillaume Dem\'esy. Other code contributors include: David Colignon, Tuan Ledinh, Patrick Lefevre, Andre Nicolet, Jean-Francois Remacle, Timo Tarhasaari, Christophe Trophime, Marc Ume, Peter Binde and Louis Denis. See the source code for more details. Thanks to the following folks who have contributed by providing fresh ideas on theoretical or programming topics, who have sent patches, requests for changes or improvements, or who gave us access to exotic machines for testing GetDP: Olivier Adam, Alejandro Angulo, Geoffrey Deliege, Mark Evans, Philippe Geuzaine, Eric Godard, Sebastien Guenneau, Daniel Kedzierski, Samuel Kvasnica, Benoit Meys, Uwe Pahner, Georgia Psoni, Robert Struijs, Ahmed Rassili, Thierry Scordilis, Herve Tortel, Jose Geraldo A. Brito Neto, Matthias Fenner, Daryl Van Vorst. The AVL tree code (src/common/avl.*) is copyright (C) 1988-1993, 1995 The Regents of the University of California. Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The University of California makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. The KissFFT code (src/numeric/kissfft.hh) is copyright (c) 2003-2010 Mark Borgerding. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the author nor the names of any contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The picojson code (src/common/picojson.h) is Copyright 2009-2010 Cybozu Labs, Inc., Copyright 2011-2014 Kazuho Oku, All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of GetDP may contain code (in the contrib/Arpack subdirectory) written by Danny Sorensen, Richard Lehoucq, Chao Yang and Kristi Maschhoff from the Dept. of Computational & Applied Mathematics at Rice University, Houston, Texas, USA. See http://www.caam.rice.edu/software/ARPACK/ for more info. This version of GetDP may contain code (in the contrib/Sparskit subdirectory) copyright (C) 1990 Yousef Saad: check the configuration options. Appendix H License ****************** GetDP is provided under the terms of the GNU General Public License (GPL), Version 2 or later. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. Concept index ************* * Menu: * .msh file: Input file format. (line 6079) * .pre file: File pre. (line 6128) * .res file: File res. (line 6177) * Acknowledgments: Copyright and credits. (line 6791) * Analytical integration: Integration. (line 1747) * Approximation spaces: FunctionSpace. (line 1588) * Arguments: Functions. (line 1022) * Arguments, definition: Arguments. (line 1112) * Axisymmetric, transformation: Jacobian. (line 1704) * Basis Functions: FunctionSpace. (line 1588) * Binary operators: Operator types. (line 928) * Boundary conditions: Constraint. (line 1517) * Boundary Element Method: Which problems can GetDP actually solve?. (line 307) * Bugs, reporting: Bug reports. (line 353) * Built-in functions: Functions. (line 1022) * Change of coordinates: Jacobian. (line 1704) * Changelog: Version history. (line 6558) * Circuit equations: Constraint. (line 1517) * Command line options: Running GetDP. (line 405) * Comments: Comments. (line 611) * Complete examples: Complete examples. (line 5209) * Complex-valued, system: Resolution. (line 1895) * Concepts, index: Concept index. (line 7227) * Conditionals: Macros loops and conditionals. (line 1284) * Constant, definition: Constants. (line 693) * Constant, evaluation: Constants. (line 693) * Constraint, definition: Constraint. (line 1517) * Constraint, examples: Constraint examples. (line 4496) * Constraint, types: Types for Constraint. (line 2953) * Contributors, list: Copyright and credits. (line 6791) * Coordinate change: Jacobian. (line 1704) * Copyright: Copying conditions. (line 152) * Copyright <1>: Copyright and credits. (line 6791) * Credits: Copyright and credits. (line 6791) * Curl: Fields. (line 1169) * Current values: Current values. (line 1056) * Dependences, objects: Numerical tools as objects. (line 216) * Derivative, exterior: Fields. (line 1169) * Derivative, time: Formulation. (line 1795) * Developments, future: Which problems can GetDP actually solve?. (line 307) * Differential operators: Fields. (line 1169) * Discrete function spaces: FunctionSpace. (line 1588) * Discrete quantities: Fields. (line 1169) * Discretized Geometry: Group. (line 1385) * Divergence: Fields. (line 1169) * Document syntax: Syntactic rules. (line 383) * Download: Obtaining GetDP. (line 142) * Download <1>: Copying conditions. (line 152) * Edge element space, example: Magnetostatics. (line 4902) * Efficiency, tips: Tips and tricks. (line 6524) * Electromagnetism: Which problems can GetDP actually solve?. (line 307) * Electrostatic formulation: Electrostatics. (line 4844) * Elementary matrices: Formulation. (line 1795) * Entities, topological: Group. (line 1385) * Equations: Formulation. (line 1795) * Evaluation mechanism: Constants. (line 693) * Evaluation, order: Evaluation order. (line 1004) * Examples, complete: Complete examples. (line 5209) * Examples, short: Short examples. (line 4358) * Exporting results: PostOperation. (line 2038) * Expression, definition: Expression definition. (line 636) * Exterior derivative: Fields. (line 1169) * FAQ: Frequently asked questions. (line 6422) * Fields: Fields. (line 1169) * File, .msh: Input file format. (line 6079) * File, .pre: File pre. (line 6128) * File, .res: File res. (line 6177) * File, comment: Comments. (line 611) * File, include: Includes. (line 622) * File, mesh: Input file format. (line 6079) * File, pre-processing: File pre. (line 6128) * File, result: File res. (line 6177) * Finite Difference Method: Which problems can GetDP actually solve?. (line 307) * Finite Element Method: Which problems can GetDP actually solve?. (line 307) * Finite Volume Method: Which problems can GetDP actually solve?. (line 307) * Floating point numbers: Constants. (line 693) * Floating potential, example: Electrostatics 2. (line 4876) * Format, output: PostOperation. (line 2038) * Formulation, definition: Formulation. (line 1795) * Formulation, electrostatics: Electrostatics. (line 4844) * Formulation, examples: Formulation examples. (line 4841) * Formulation, types: Types for Formulation. (line 3257) * Frequency: Resolution. (line 1895) * Frequently asked questions: Frequently asked questions. (line 6422) * Function groups: Group. (line 1385) * Function space, definition: FunctionSpace. (line 1588) * Function space, examples: FunctionSpace examples. (line 4547) * Function space, types: Types for FunctionSpace. (line 3008) * Function, definition: Functions. (line 1022) * Function, definition <1>: Function. (line 1474) * Function, examples: Function examples. (line 4411) * Future developments: Which problems can GetDP actually solve?. (line 307) * Gauss, integration: Integration. (line 1747) * Geometric transformations: Jacobian. (line 1704) * Global quantity: Formulation. (line 1795) * Global quantity, example: Electrostatics 2. (line 4876) * Gmsh, examples: Gmsh examples. (line 6205) * Gmsh, file format: Input file format. (line 6079) * Gradient: Fields. (line 1169) * Grid: Group. (line 1385) * Group, definition: Group. (line 1385) * Group, examples: Group examples. (line 4382) * Group, types: Types for Group. (line 2124) * Hierarchical basis functions: FunctionSpace. (line 1588) * History, versions: Version history. (line 6558) * Includes: Includes. (line 622) * Index, concepts: Concept index. (line 7227) * Index, metasyntactic variables: Metasyntactic variable index. (line 0) * Index, syntax: Syntax index. (line 0) * Input file format: Input file format. (line 6079) * Integer numbers: Constants. (line 693) * Integral Equation Method: Which problems can GetDP actually solve?. (line 307) * Integral quantity: Formulation. (line 1795) * Integration, definition: Integration. (line 1747) * Integration, examples: Integration examples. (line 4818) * Integration, types: Types for Integration. (line 3215) * Internet address: Obtaining GetDP. (line 142) * Internet address <1>: Copying conditions. (line 152) * Interpolation: Fields. (line 1169) * Interpolation <1>: FunctionSpace. (line 1588) * Introduction: Overview. (line 191) * Iterative loop: Resolution. (line 1895) * Jacobian, definition: Jacobian. (line 1704) * Jacobian, examples: Jacobian examples. (line 4786) * Jacobian, types: Types for Jacobian. (line 3141) * Keywords, index: Syntax index. (line 0) * License: Copying conditions. (line 152) * License <1>: License. (line 6880) * Linear system solving: Resolution. (line 1895) * Linking, objects: Numerical tools as objects. (line 216) * Local quantity: Formulation. (line 1795) * Loops: Macros loops and conditionals. (line 1284) * Macros: Macros loops and conditionals. (line 1284) * Maps: PostOperation. (line 2038) * Matrices, elementary: Formulation. (line 1795) * Mechanics: Which problems can GetDP actually solve?. (line 307) * Mesh: Group. (line 1385) * Mesh, examples: Gmsh examples. (line 6205) * Mesh, file format: Input file format. (line 6079) * Metasyntactic variables, index: Metasyntactic variable index. (line 0) * Method of Moments: Which problems can GetDP actually solve?. (line 307) * Networks: Constraint. (line 1517) * Newmark, time scheme: Resolution. (line 1895) * Newton, nonlinear scheme: Resolution. (line 1895) * Nodal function space, example: Electrostatics. (line 4844) * Nonlinear system solving: Resolution. (line 1895) * Numbers, integer: Constants. (line 693) * Numbers, real: Constants. (line 693) * Numerical integration: Integration. (line 1747) * Objects, definition: Objects. (line 1376) * Objects, dependences: Numerical tools as objects. (line 216) * Objects, types: Types for objects. (line 2121) * Operating system: Running GetDP. (line 405) * Operation, priorities: Evaluation order. (line 1004) * Operators, definition: Operator types. (line 928) * Operators, differential: Fields. (line 1169) * Options, command line: Running GetDP. (line 405) * Order of evaluation: Evaluation order. (line 1004) * Output file format: Output file format. (line 6125) * Overview: Overview. (line 191) * Parameters: Functions. (line 1022) * Parse: Macros loops and conditionals. (line 1284) * Philosophy, general: Numerical tools as objects. (line 216) * Physical problems: Which problems can GetDP actually solve?. (line 307) * Picard, nonlinear scheme: Resolution. (line 1895) * Piecewise functions: Functions. (line 1022) * Piecewise functions <1>: Function. (line 1474) * Platforms: Running GetDP. (line 405) * Post-operation, definition: PostOperation. (line 2038) * Post-operation, examples: PostOperation examples. (line 5146) * Post-operation, types: Types for PostOperation. (line 3912) * Post-processing, definition: PostProcessing. (line 1976) * Post-processing, examples: PostProcessing examples. (line 5105) * Post-processing, types: Types for PostProcessing. (line 3897) * Priorities, operations: Evaluation order. (line 1004) * Processing cycle: Numerical tools as objects. (line 216) * Quantities, discrete: Fields. (line 1169) * Quantity, global: Formulation. (line 1795) * Quantity, integral: Formulation. (line 1795) * Quantity, local: Formulation. (line 1795) * Quantity, post-processing: PostProcessing. (line 1976) * Questions, frequently asked: Frequently asked questions. (line 6422) * Reading, guidelines: How to Read this Manual. (line 366) * Real numbers: Constants. (line 693) * Region groups: Group. (line 1385) * Registers, definition: Run-time variables and registers. (line 1124) * Relaxation factor: Resolution. (line 1895) * Reporting bugs: Bug reports. (line 353) * Resolution, definition: Resolution. (line 1895) * Resolution, examples: Resolution examples. (line 4966) * Resolution, types: Types for Resolution. (line 3328) * Results, exploitation: PostProcessing. (line 1976) * Results, export: PostOperation. (line 2038) * Rules, syntactic: Syntactic rules. (line 383) * Run-time variables, definition: Run-time variables and registers. (line 1124) * Running GetDP: Running GetDP. (line 405) * Scope of GetDP: Which problems can GetDP actually solve?. (line 307) * Sections: PostOperation. (line 2038) * Short examples: Short examples. (line 4358) * Solving, system: Resolution. (line 1895) * Spaces, discrete: FunctionSpace. (line 1588) * String: Constants. (line 693) * Symmetry, integral kernel: Formulation. (line 1795) * Syntax, index: Syntax index. (line 0) * Syntax, rules: Syntactic rules. (line 383) * System, definition: Resolution. (line 1895) * Ternary operators: Operator types. (line 928) * Thermics: Which problems can GetDP actually solve?. (line 307) * Theta, time scheme: Resolution. (line 1895) * Time derivative: Formulation. (line 1795) * Time stepping: Resolution. (line 1895) * Time, discretization: Resolution. (line 1895) * Tips: Tips and tricks. (line 6524) * Tools, order of definition: Numerical tools as objects. (line 216) * Topology: Group. (line 1385) * Transformations, geometric: Jacobian. (line 1704) * Tree: Group. (line 1385) * Tricks: Tips and tricks. (line 6524) * Types, definition: Types for objects. (line 2121) * Unary operators: Operator types. (line 928) * User-defined functions: Function. (line 1474) * Values, current: Current values. (line 1056) * Variables, index: Metasyntactic variable index. (line 0) * Versions: Version history. (line 6558) * Web site: Obtaining GetDP. (line 142) * Web site <1>: Copying conditions. (line 152) * Wiki: Complete examples. (line 5209) Metasyntactic variable index **************************** * Menu: * :: Syntactic rules. (line 383) * <, >: Syntactic rules. (line 383) * |: Syntactic rules. (line 383) * ...: Syntactic rules. (line 383) * AFFECTATION: Constants. (line 693) * ARGUMENT: Arguments. (line 1112) * BASIS-FUNCTION-ID: FunctionSpace. (line 1588) * BASIS-FUNCTION-LIST: FunctionSpace. (line 1588) * BASIS-FUNCTION-TYPE: FunctionSpace. (line 1588) * BASIS-FUNCTION-TYPE <1>: Types for FunctionSpace. (line 3008) * BUILT-IN-FUNCTION-ID: Functions. (line 1022) * COEF-ID: FunctionSpace. (line 1588) * CONSTANT-DEF: Constants. (line 693) * CONSTANT-ID: Constants. (line 693) * CONSTRAINT-CASE-ID: Constraint. (line 1517) * CONSTRAINT-CASE-VAL: Constraint. (line 1517) * CONSTRAINT-ID: Constraint. (line 1517) * CONSTRAINT-TYPE: Constraint. (line 1517) * CONSTRAINT-TYPE <1>: Types for Constraint. (line 2953) * CONSTRAINT-VAL: Constraint. (line 1517) * COORD-FUNCTION-ID: Coordinate functions. (line 2668) * ELEMENT-TYPE: Integration. (line 1747) * ELEMENT-TYPE <1>: Types for Integration. (line 3215) * ETC: Syntactic rules. (line 383) * EXPRESSION: Expression definition. (line 636) * EXPRESSION-CHAR: Constants. (line 693) * EXPRESSION-CST: Constants. (line 693) * EXPRESSION-CST-LIST: Constants. (line 693) * EXPRESSION-CST-LIST-ITEM: Constants. (line 693) * EXPRESSION-LIST: Expression definition. (line 636) * EXTENDED-MATH-FUNCTION-ID: Extended math functions. (line 2377) * FORMULATION-ID: Formulation. (line 1795) * FORMULATION-LIST: Resolution. (line 1895) * FORMULATION-TYPE: Formulation. (line 1795) * FORMULATION-TYPE <1>: Types for Formulation. (line 3257) * FUNCTION-ID: Function. (line 1474) * FUNCTION-SPACE-ID: FunctionSpace. (line 1588) * FUNCTION-SPACE-TYPE: FunctionSpace. (line 1588) * FUNCTION-SPACE-TYPE <1>: Types for FunctionSpace. (line 3008) * GLOBAL-QUANTITY-ID: FunctionSpace. (line 1588) * GLOBAL-QUANTITY-TYPE: FunctionSpace. (line 1588) * GLOBAL-QUANTITY-TYPE <1>: Types for FunctionSpace. (line 3008) * GREEN-FUNCTION-ID: Green functions. (line 2466) * GROUP-DEF: Group. (line 1385) * GROUP-ID: Group. (line 1385) * GROUP-LIST: Group. (line 1385) * GROUP-LIST-ITEM: Group. (line 1385) * GROUP-SUB-TYPE: Group. (line 1385) * GROUP-TYPE: Group. (line 1385) * GROUP-TYPE <1>: Types for Group. (line 2124) * INTEGER: Constants. (line 693) * INTEGRAL-VALUE: PostProcessing. (line 1976) * INTEGRATION-ID: Integration. (line 1747) * INTEGRATION-TYPE: Integration. (line 1747) * INTEGRATION-TYPE <1>: Types for Integration. (line 3215) * JACOBIAN-ID: Jacobian. (line 1704) * JACOBIAN-TYPE: Jacobian. (line 1704) * JACOBIAN-TYPE <1>: Types for Jacobian. (line 3141) * LOCAL-TERM-TYPE: Formulation. (line 1795) * LOCAL-TERM-TYPE <1>: Types for Formulation. (line 3257) * LOCAL-VALUE: PostProcessing. (line 1976) * LOOP: Macros loops and conditionals. (line 1284) * MATH-FUNCTION-ID: Math functions. (line 2215) * MISC-FUNCTION-ID: Miscellaneous functions. (line 2693) * OPERATOR-BINARY: Operator types. (line 928) * OPERATOR-TERNARY-LEFT: Operator types. (line 928) * OPERATOR-TERNARY-RIGHT: Operator types. (line 928) * OPERATOR-UNARY: Operator types. (line 928) * POST-OPERATION-FMT: PostOperation. (line 2038) * POST-OPERATION-FMT <1>: Types for PostOperation. (line 4294) * POST-OPERATION-ID: PostOperation. (line 2038) * POST-OPERATION-OP: PostOperation. (line 2038) * POST-PROCESSING-ID: PostProcessing. (line 1976) * POST-QUANTITY-ID: PostProcessing. (line 1976) * POST-QUANTITY-TYPE: PostProcessing. (line 1976) * POST-VALUE: PostProcessing. (line 1976) * POST-VALUE <1>: Types for PostProcessing. (line 3897) * PRINT-OPTION: PostOperation. (line 2038) * PRINT-OPTION <1>: Types for PostOperation. (line 3999) * PRINT-SUPPORT: PostOperation. (line 2038) * PRINT-SUPPORT <1>: Types for PostOperation. (line 3912) * QUANTITY: Fields. (line 1169) * QUANTITY-DOF: Fields. (line 1169) * QUANTITY-ID: Fields. (line 1169) * QUANTITY-OPERATOR: Fields. (line 1169) * QUANTITY-TYPE: Formulation. (line 1795) * QUANTITY-TYPE <1>: Types for Formulation. (line 3257) * REAL: Constants. (line 693) * REGISTER-GET: Run-time variables and registers. (line 1124) * REGISTER-SET: Run-time variables and registers. (line 1124) * RESOLUTION-ID: Resolution. (line 1895) * RESOLUTION-OP: Resolution. (line 1895) * RESOLUTION-OP <1>: Types for Resolution. (line 3328) * STRING: Constants. (line 693) * STRING-ID: Constants. (line 693) * SUB-SPACE-ID: FunctionSpace. (line 1588) * SYSTEM-ID: Resolution. (line 1895) * SYSTEM-TYPE: Resolution. (line 1895) * TERM-OP-TYPE: Formulation. (line 1795) * TERM-OP-TYPE <1>: Types for Formulation. (line 3257) * TYPE-FUNCTION-ID: Type manipulation functions. (line 2503) * VARIABLE-GET: Run-time variables and registers. (line 1124) * VARIABLE-SET: Run-time variables and registers. (line 1124) Syntax index ************ * Menu: * !: Operator types. (line 928) * !=: Operator types. (line 928) * #EXPRESSION-CST: Run-time variables and registers. (line 1124) * #include: Includes. (line 622) * $A: Current values. (line 1056) * $B: Current values. (line 1056) * $Breakpoint: Current values. (line 1056) * $C: Current values. (line 1056) * $DTime: Current values. (line 1056) * $EigenvalueImag: Current values. (line 1056) * $EigenvalueReal: Current values. (line 1056) * $INTEGER: Arguments. (line 1112) * $Iteration: Current values. (line 1056) * $Theta: Current values. (line 1056) * $Time: Current values. (line 1056) * $TimeStep: Current values. (line 1056) * $X: Current values. (line 1056) * $XS: Current values. (line 1056) * $Y: Current values. (line 1056) * $YS: Current values. (line 1056) * $Z: Current values. (line 1056) * $ZS: Current values. (line 1056) * %: Operator types. (line 928) * &: Operator types. (line 928) * &&: Operator types. (line 928) * (): Evaluation order. (line 1004) * *: Operator types. (line 928) * +: Operator types. (line 928) * -: Operator types. (line 928) * - <1>: Operator types. (line 928) * -adapt: Running GetDP. (line 513) * -bin: Running GetDP. (line 527) * -cache: Running GetDP. (line 523) * -cal: Running GetDP. (line 440) * -check: Running GetDP. (line 535) * -cpu: Running GetDP. (line 546) * -gmshread: Running GetDP. (line 471) * -help: Running GetDP. (line 581) * -info: Running GetDP. (line 573) * -msh: Running GetDP. (line 459) * -msh_scaling: Running GetDP. (line 466) * -name: Running GetDP. (line 487) * -onelab: Running GetDP. (line 558) * -order: Running GetDP. (line 518) * -p: Running GetDP. (line 550) * -pos: Running GetDP. (line 450) * -pre: Running GetDP. (line 429) * -progress: Running GetDP. (line 551) * -res: Running GetDP. (line 482) * -restart: Running GetDP. (line 493) * -setnumber: Running GetDP. (line 563) * -setstring: Running GetDP. (line 568) * -slepc: Running GetDP. (line 509) * -solve: Running GetDP. (line 498) * -solver: Running GetDP. (line 503) * -split: Running GetDP. (line 478) * -v: Running GetDP. (line 539) * -v2: Running GetDP. (line 531) * -verbose: Running GetDP. (line 540) * -version: Running GetDP. (line 577) * /: Operator types. (line 928) * /*, */: Comments. (line 611) * //: Comments. (line 611) * /\: Operator types. (line 928) * 0D: Constants. (line 693) * 1D: Constants. (line 693) * 2D: Constants. (line 693) * 3D: Constants. (line 693) * <: Operator types. (line 928) * <<: Operator types. (line 928) * <=: Operator types. (line 928) * =: Constants. (line 693) * = <1>: Group. (line 1385) * = <2>: Function. (line 1474) * ==: Operator types. (line 928) * >: Operator types. (line 928) * >=: Operator types. (line 928) * >>: Operator types. (line 928) * ?:: Operator types. (line 928) * ^: Operator types. (line 928) * |: Operator types. (line 928) * ||: Operator types. (line 928) * ~: Constants. (line 693) * Abs: Math functions. (line 2307) * Acos: Math functions. (line 2259) * Adapt: Types for PostOperation. (line 4166) * Adaptation: Types for PostOperation. (line 4351) * AliasOf: Types for FunctionSpace. (line 3131) * All: Group. (line 1385) * All <1>: Jacobian. (line 1704) * Analytic: Integration. (line 1747) * Append: Constraint. (line 1517) * Append <1>: FunctionSpace. (line 1588) * Append <2>: Jacobian. (line 1704) * Append <3>: Integration. (line 1747) * Append <4>: Formulation. (line 1795) * Append <5>: Resolution. (line 1895) * Append <6>: PostProcessing. (line 1976) * Append <7>: PostOperation. (line 2038) * AppendExpressionFormat: Types for PostOperation. (line 4092) * AppendExpressionToFileName: Types for PostOperation. (line 4086) * AppendStringToFileName: Types for PostOperation. (line 4104) * AppendTimeStepToFileName: Types for PostOperation. (line 4098) * AppendToExistingFile: Types for PostOperation. (line 4018) * Apply: Types for Resolution. (line 3474) * Asin: Math functions. (line 2248) * Assign: Types for Constraint. (line 2955) * AssignFromResolution: Types for Constraint. (line 2965) * AssociatedWith: Types for FunctionSpace. (line 3134) * Atan: Math functions. (line 2270) * Atan2: Math functions. (line 2276) * AtGaussPoints: Types for PostOperation. (line 4040) * AtIndex: Miscellaneous functions. (line 2766) * BasisFunction: FunctionSpace. (line 1588) * BF: Fields. (line 1213) * BF_CurlEdge: Types for FunctionSpace. (line 3053) * BF_CurlGroupOfEdges: Types for FunctionSpace. (line 3069) * BF_CurlGroupOfPerpendicularEdge: Types for FunctionSpace. (line 3082) * BF_CurlPerpendicularEdge: Types for FunctionSpace. (line 3076) * BF_dGlobal: Types for FunctionSpace. (line 3110) * BF_DivFacet: Types for FunctionSpace. (line 3056) * BF_DivPerpendicularFacet: Types for FunctionSpace. (line 3090) * BF_Edge: Types for FunctionSpace. (line 3041) * BF_Facet: Types for FunctionSpace. (line 3044) * BF_Global: Types for FunctionSpace. (line 3106) * BF_GradGroupOfNodes: Types for FunctionSpace. (line 3062) * BF_GradNode: Types for FunctionSpace. (line 3050) * BF_GroupOfEdges: Types for FunctionSpace. (line 3066) * BF_GroupOfNodes: Types for FunctionSpace. (line 3059) * BF_GroupOfPerpendicularEdge: Types for FunctionSpace. (line 3079) * BF_Node: Types for FunctionSpace. (line 3038) * BF_NodeX: Types for FunctionSpace. (line 3114) * BF_NodeY: Types for FunctionSpace. (line 3117) * BF_NodeZ: Types for FunctionSpace. (line 3120) * BF_One: Types for FunctionSpace. (line 3126) * BF_PerpendicularEdge: Types for FunctionSpace. (line 3073) * BF_PerpendicularFacet: Types for FunctionSpace. (line 3086) * BF_Region: Types for FunctionSpace. (line 3094) * BF_RegionX: Types for FunctionSpace. (line 3097) * BF_RegionY: Types for FunctionSpace. (line 3100) * BF_RegionZ: Types for FunctionSpace. (line 3103) * BF_Volume: Types for FunctionSpace. (line 3047) * BF_Zero: Types for FunctionSpace. (line 3123) * Break: Types for Resolution. (line 3621) * Call STRING | EXPRESSION-CHAR;: Macros loops and conditionals. (line 1309) * Cart2Cyl: Type manipulation functions. (line 2642) * Cart2Pol: Type manipulation functions. (line 2532) * Cart2Sph: Type manipulation functions. (line 2636) * Case: Constraint. (line 1517) * Case <1>: Jacobian. (line 1704) * Case <2>: Integration. (line 1747) * Ceil: Math functions. (line 2318) * ChangeOfCoordinates: Types for PostOperation. (line 4206) * ChangeOfValues: Types for PostOperation. (line 4215) * Closed: Types for PostOperation. (line 4144) * Color: Types for PostOperation. (line 4132) * CompElementNum: Miscellaneous functions. (line 2744) * Complex: Type manipulation functions. (line 2505) * ComplexScalarField: Miscellaneous functions. (line 2849) * ComplexTensorField: Miscellaneous functions. (line 2861) * ComplexVectorField: Miscellaneous functions. (line 2855) * Complex_MH: Type manipulation functions. (line 2512) * CompX: Type manipulation functions. (line 2576) * CompXX: Type manipulation functions. (line 2591) * CompXY: Type manipulation functions. (line 2596) * CompXZ: Type manipulation functions. (line 2601) * CompY: Type manipulation functions. (line 2581) * CompYX: Type manipulation functions. (line 2606) * CompYY: Type manipulation functions. (line 2611) * CompYZ: Type manipulation functions. (line 2616) * CompZ: Type manipulation functions. (line 2586) * CompZX: Type manipulation functions. (line 2621) * CompZY: Type manipulation functions. (line 2626) * CompZZ: Type manipulation functions. (line 2631) * Conj: Type manipulation functions. (line 2527) * Constraint: Constraint. (line 1517) * Constraint <1>: FunctionSpace. (line 1588) * CopyResidual: Types for Resolution. (line 3524) * CopyResidual <1>: Types for Resolution. (line 3533) * CopyRightHandSide: Types for Resolution. (line 3509) * CopyRightHandSide <1>: Types for Resolution. (line 3518) * CopySolution: Types for Resolution. (line 3494) * CopySolution <1>: Types for Resolution. (line 3503) * Cos: Math functions. (line 2254) * Cosh: Math functions. (line 2287) * Cos_wt_p: Extended math functions. (line 2433) * CreateDir | CreateDirectory: Types for Resolution. (line 3864) * CreateSolution: Types for Resolution. (line 3462) * CreateSolution <1>: Types for Resolution. (line 3468) * Criterion: Integration. (line 1747) * Cross: Extended math functions. (line 2379) * Curl: Fields. (line 1225) * d: Fields. (line 1219) * D1: Fields. (line 1232) * D2: Fields. (line 1255) * DecomposeInSimplex: Types for PostOperation. (line 4223) * DefineConstant: Constants. (line 693) * DefineFunction: Function. (line 1474) * DefineGroup: Group. (line 1385) * DeleteFile: Types for Resolution. (line 3854) * Depth: Types for PostOperation. (line 4032) * deRham: Types for Formulation. (line 3268) * DestinationSystem: Resolution. (line 1895) * Det: Extended math functions. (line 2416) * dFunction: FunctionSpace. (line 1588) * Dimension: Types for PostOperation. (line 4059) * dInterpolationAkima: Miscellaneous functions. (line 2802) * dInterpolationBilinear: Miscellaneous functions. (line 2790) * dInterpolationLinear: Miscellaneous functions. (line 2779) * Distance: Miscellaneous functions. (line 2867) * Div: Fields. (line 1229) * dJn: Math functions. (line 2353) * Dof: Fields. (line 1188) * Dt: Types for Formulation. (line 3289) * DtDof: Types for Formulation. (line 3293) * DtDofJacNL: Types for Formulation. (line 3316) * DtDt: Types for Formulation. (line 3296) * DtDtDof: Types for Formulation. (line 3300) * DualEdgesOf: Types for Group. (line 2200) * DualFacetsOf: Types for Group. (line 2203) * DualNodesOf: Types for Group. (line 2197) * DualVolumesOf: Types for Group. (line 2206) * dYn: Math functions. (line 2367) * EdgesOf: Types for Group. (line 2142) * EdgesOfTreeIn: Types for Group. (line 2187) * Eig: Types for Formulation. (line 3304) * EigenSolve: Types for Resolution. (line 3659) * EigenvalueLegend: Types for PostOperation. (line 4287) * ElementNum: Miscellaneous functions. (line 2756) * ElementsOf: Types for Group. (line 2157) * ElementTable: Types for PostOperation. (line 4329) * ElementVol: Miscellaneous functions. (line 2728) * Else: Macros loops and conditionals. (line 1358) * ElseIf ( EXPRESSION-CST ): Macros loops and conditionals. (line 1352) * ENABLE_ARPACK: Compiling the source code. (line 6354) * ENABLE_BLAS_LAPACK: Compiling the source code. (line 6356) * ENABLE_BUILD_ANDROID: Compiling the source code. (line 6368) * ENABLE_BUILD_DYNAMIC: Compiling the source code. (line 6365) * ENABLE_BUILD_IOS: Compiling the source code. (line 6370) * ENABLE_BUILD_LIB: Compiling the source code. (line 6359) * ENABLE_BUILD_SHARED: Compiling the source code. (line 6362) * ENABLE_FORTRAN: Compiling the source code. (line 6372) * ENABLE_GMSH: Compiling the source code. (line 6375) * ENABLE_GSL: Compiling the source code. (line 6377) * ENABLE_KERNEL: Compiling the source code. (line 6379) * ENABLE_MMA: Compiling the source code. (line 6381) * ENABLE_MPI: Compiling the source code. (line 6383) * ENABLE_MULTIHARMONIC: Compiling the source code. (line 6385) * ENABLE_NR: Compiling the source code. (line 6387) * ENABLE_NX: Compiling the source code. (line 6389) * ENABLE_OCTAVE: Compiling the source code. (line 6391) * ENABLE_OPENMP: Compiling the source code. (line 6393) * ENABLE_PETSC: Compiling the source code. (line 6396) * ENABLE_PEWE: Compiling the source code. (line 6412) * ENABLE_PRIVATE_API: Compiling the source code. (line 6398) * ENABLE_PYTHON: Compiling the source code. (line 6400) * ENABLE_SLEPC: Compiling the source code. (line 6402) * ENABLE_SMALLFEM: Compiling the source code. (line 6404) * ENABLE_SPARSKIT: Compiling the source code. (line 6406) * ENABLE_SYSTEM_CONTRIB: Compiling the source code. (line 6409) * ENABLE_WRAP_PYTHON: Compiling the source code. (line 6414) * ENABLE_ZITSOL: Compiling the source code. (line 6416) * EndFor: Macros loops and conditionals. (line 1344) * EndIf: Macros loops and conditionals. (line 1363) * Entity: FunctionSpace. (line 1588) * EntitySubType: FunctionSpace. (line 1588) * EntityType: FunctionSpace. (line 1588) * Equation: Formulation. (line 1795) * Error: Types for Resolution. (line 3597) * Evaluate: Types for Resolution. (line 3567) * Exit: Types for Resolution. (line 3626) * Exp: Math functions. (line 2223) * Fabs: Math functions. (line 2302) * FacetsOf: Types for Group. (line 2147) * FacetsOfTreeIn: Types for Group. (line 2192) * FemEquation: Types for Formulation. (line 3259) * Field: Miscellaneous functions. (line 2813) * Field <1>: Miscellaneous functions. (line 2820) * File: Types for PostOperation. (line 4001) * File <1>: Types for PostOperation. (line 4006) * File <2>: Types for PostOperation. (line 4013) * Floor: Math functions. (line 2312) * Fmod: Math functions. (line 2324) * For ( EXPRESSION-CST : EXPRESSION-CST ): Macros loops and conditionals. (line 1312) * For ( EXPRESSION-CST : EXPRESSION-CST : EXPRESSION-CST ): Macros loops and conditionals. (line 1319) * For STRING In { EXPRESSION-CST : EXPRESSION-CST : EXPRESSION-CST }: Macros loops and conditionals. (line 1335) * For STRING In { EXPRESSION-CST : EXPRESSION-CST }: Macros loops and conditionals. (line 1327) * Form0: Types for FunctionSpace. (line 3010) * Form1: Types for FunctionSpace. (line 3013) * Form1P: Types for FunctionSpace. (line 3022) * Form2: Types for FunctionSpace. (line 3016) * Form2P: Types for FunctionSpace. (line 3026) * Form3: Types for FunctionSpace. (line 3019) * Format: PostOperation. (line 2038) * Format <1>: Types for PostOperation. (line 4161) * Formulation: FunctionSpace. (line 1588) * Formulation <1>: Formulation. (line 1795) * FourierTransform: Types for Resolution. (line 3682) * Frequency: Resolution. (line 1895) * Frequency <1>: Types for PostOperation. (line 4156) * FrequencyLegend: Types for PostOperation. (line 4280) * Function: Function. (line 1474) * Function <1>: FunctionSpace. (line 1588) * FunctionSpace: FunctionSpace. (line 1588) * Gauss: Types for Integration. (line 3217) * GaussLegendre: Types for Integration. (line 3220) * Generate: Types for Resolution. (line 3330) * GenerateGroup: Types for Resolution. (line 3387) * GenerateJac: Types for Resolution. (line 3353) * GenerateOnly: Types for Resolution. (line 3377) * GenerateOnlyJac: Types for Resolution. (line 3382) * GenerateRightHandSideGroup: Types for Resolution. (line 3391) * GenerateSeparate: Types for Resolution. (line 3368) * GeoElement: Integration. (line 1747) * GetCpuTime: Miscellaneous functions. (line 2875) * GetMemory: Miscellaneous functions. (line 2887) * GetNormSolution | GetNormRightHandSide | GetNormResidual | GetNormIncrement: Types for Resolution. (line 3427) * GetNumberRunTime: Miscellaneous functions. (line 2906) * GetNumElements: Miscellaneous functions. (line 2750) * GetResidual: Types for Resolution. (line 3421) * GetVariable: Miscellaneous functions. (line 2921) * GetVolume: Miscellaneous functions. (line 2739) * GetWallClockTime: Miscellaneous functions. (line 2881) * Global: Types for Group. (line 2133) * Global <1>: Types for Formulation. (line 3278) * GlobalEquation: Formulation. (line 1795) * GlobalQuantity: FunctionSpace. (line 1588) * GlobalTerm: Formulation. (line 1795) * Gmsh: Types for PostOperation. (line 4296) * GmshClearAll: Types for Resolution. (line 3843) * GmshParsed: Types for PostOperation. (line 4297) * GmshRead: Types for Resolution. (line 3806) * GmshRead <1>: Types for Resolution. (line 3821) * GmshRead <2>: Types for Resolution. (line 3830) * GmshWrite: Types for Resolution. (line 3837) * Gnuplot: Types for PostOperation. (line 4338) * Grad: Fields. (line 1222) * GradHelmholtz: Green functions. (line 2494) * GradLaplace: Green functions. (line 2482) * Group: Group. (line 1385) * Group <1>: FunctionSpace. (line 1588) * GroupOfRegionsOf: Types for Group. (line 2183) * GroupsOfEdgesOf: Types for Group. (line 2170) * GroupsOfEdgesOnNodesOf: Types for Group. (line 2177) * GroupsOfNodesOf: Types for Group. (line 2166) * HarmonicToTime: Types for PostOperation. (line 4053) * Helmholtz: Green functions. (line 2488) * Hexahedron: Types for Integration. (line 3238) * Hidden: Types for PostOperation. (line 4138) * Hypot: Extended math functions. (line 2384) * If ( EXPRESSION-CST ): Macros loops and conditionals. (line 1347) * Im: Type manipulation functions. (line 2522) * In: Formulation. (line 1795) * In <1>: PostProcessing. (line 1976) * Include: Includes. (line 622) * IndexOfSystem: Formulation. (line 1795) * Init: Types for Constraint. (line 2958) * InitFromResolution: Types for Constraint. (line 2968) * InitSolution: Types for Resolution. (line 3444) * InitSolution1: Types for Resolution. (line 3456) * Integral: PostProcessing. (line 1976) * Integral <1>: Types for Formulation. (line 3265) * Integral <2>: Types for Formulation. (line 3283) * Integral <3>: Types for PostProcessing. (line 3904) * Integration: Integration. (line 1747) * Integration <1>: Formulation. (line 1795) * Integration <2>: PostProcessing. (line 1976) * InterpolationAkima: Miscellaneous functions. (line 2796) * InterpolationBilinear: Miscellaneous functions. (line 2785) * InterpolationLinear: Miscellaneous functions. (line 2773) * Interval: Extended math functions. (line 2457) * Inv: Extended math functions. (line 2411) * Iso: Types for PostOperation. (line 4190) * Iso <1>: Types for PostOperation. (line 4196) * IterativeLinearSolver: Types for Resolution. (line 3797) * IterativeLoop: Types for Resolution. (line 3757) * IterativeLoopN: Types for Resolution. (line 3767) * JacNL: Types for Formulation. (line 3312) * Jacobian: Jacobian. (line 1704) * Jacobian <1>: Formulation. (line 1795) * Jacobian <2>: PostProcessing. (line 1976) * Jn: Math functions. (line 2346) * Lanczos: Types for Resolution. (line 3672) * Laplace: Green functions. (line 2477) * LastTimeStepOnly: Types for PostOperation. (line 4081) * LevelTest: Macros loops and conditionals. (line 1366) * Lin: Types for Jacobian. (line 3150) * Line: Types for Integration. (line 3226) * Link: Types for Constraint. (line 2974) * LinkCplx: Types for Constraint. (line 3000) * List: Constants. (line 693) * ListAlt: Constants. (line 693) * Local: PostProcessing. (line 1976) * Local <1>: Types for Formulation. (line 3273) * Local <2>: Types for PostProcessing. (line 3899) * Log: Math functions. (line 2228) * Log10: Math functions. (line 2233) * Loop: Formulation. (line 1795) * Macro ( EXPRESSION-CHAR , EXPRESSION-CHAR ) ;: Macros loops and conditionals. (line 1296) * Macro STRING | EXPRESSION-CHAR: Macros loops and conditionals. (line 1286) * Max: Math functions. (line 2335) * Min: Math functions. (line 2330) * MPI_Barrier: Types for Resolution. (line 3879) * MPI_BroadcastFields: Types for Resolution. (line 3884) * MPI_BroadcastVariables: Types for Resolution. (line 3889) * MPI_SetCommSelf: Types for Resolution. (line 3869) * MPI_SetCommWorld: Types for Resolution. (line 3874) * Name: Constraint. (line 1517) * Name <1>: FunctionSpace. (line 1588) * Name <2>: Jacobian. (line 1704) * Name <3>: Integration. (line 1747) * Name <4>: Formulation. (line 1795) * Name <5>: Resolution. (line 1895) * Name <6>: PostProcessing. (line 1976) * Name <7>: PostOperation. (line 2038) * Name | Label: Types for PostOperation. (line 4025) * NameOfBasisFunction: FunctionSpace. (line 1588) * NameOfCoef: FunctionSpace. (line 1588) * NameOfConstraint: FunctionSpace. (line 1588) * NameOfConstraint <1>: Formulation. (line 1795) * NameOfFormulation: Resolution. (line 1895) * NameOfFormulation <1>: PostProcessing. (line 1976) * NameOfMesh: Resolution. (line 1895) * NameOfPostProcessing: PostOperation. (line 2038) * NameOfSpace: Formulation. (line 1795) * NameOfSystem: PostProcessing. (line 1976) * Network: Formulation. (line 1795) * Network <1>: Types for Constraint. (line 2971) * NeverDt: Types for Formulation. (line 3321) * Node: Formulation. (line 1795) * NodesOf: Types for Group. (line 2137) * NodeTable: Types for PostOperation. (line 4320) * NoMesh: Types for PostOperation. (line 4114) * NoNewLine: Types for PostOperation. (line 4202) * Norm: Extended math functions. (line 2389) * Normal: Miscellaneous functions. (line 2706) * NormalSource: Miscellaneous functions. (line 2711) * NumberOfPoints: Integration. (line 1747) * OnBox: Types for PostOperation. (line 3988) * OnElementsOf: Types for PostOperation. (line 3914) * OnGlobal: Types for PostOperation. (line 3926) * OnGrid: Types for PostOperation. (line 3938) * OnGrid <1>: Types for PostOperation. (line 3946) * OnLine: Types for PostOperation. (line 3967) * OnPlane: Types for PostOperation. (line 3977) * OnPoint: Types for PostOperation. (line 3961) * OnRegion: Types for PostOperation. (line 3921) * OnSection: Types for PostOperation. (line 3929) * Operation: Resolution. (line 1895) * Operation <1>: PostOperation. (line 2038) * Order: Miscellaneous functions. (line 2808) * OriginSystem: Resolution. (line 1895) * OverrideTimeStepValue: Types for PostOperation. (line 4109) * Parse [ EXPRESSION-CHAR ];: Macros loops and conditionals. (line 1370) * Period: Extended math functions. (line 2451) * Pi: Constants. (line 693) * Point: Types for Integration. (line 3247) * PostOperation: PostOperation. (line 2038) * PostOperation <1>: Types for Resolution. (line 3801) * PostProcessing: PostProcessing. (line 1976) * Print: PostOperation. (line 2038) * Print <1>: Types for Resolution. (line 3642) * Print <2>: Types for Resolution. (line 3649) * Printf: Miscellaneous functions. (line 2695) * Prism: Types for Integration. (line 3241) * Pyramid: Types for Integration. (line 3244) * Quadrangle: Types for Integration. (line 3232) * QuadraturePointIndex: Miscellaneous functions. (line 2761) * Quantity: FunctionSpace. (line 1588) * Quantity <1>: Formulation. (line 1795) * Quantity <2>: PostProcessing. (line 1976) * Rand: Miscellaneous functions. (line 2701) * Re: Type manipulation functions. (line 2517) * ReadTable: Types for Resolution. (line 3848) * Region: Types for Group. (line 2130) * Region <1>: Constraint. (line 1517) * Region <2>: Jacobian. (line 1704) * RemoveLastSolution: Types for Resolution. (line 3552) * RenameFile: Types for Resolution. (line 3859) * Residual: Types for Resolution. (line 3489) * Resolution: FunctionSpace. (line 1588) * Resolution <1>: Resolution. (line 1895) * Return: Macros loops and conditionals. (line 1291) * Rot: Fields. (line 1226) * Rotate: Extended math functions. (line 2421) * SaveSolution: Types for Resolution. (line 3539) * SaveSolutions: Types for Resolution. (line 3544) * Scalar: Types for FunctionSpace. (line 3030) * ScalarField: Miscellaneous functions. (line 2828) * SendToServer: Types for PostOperation. (line 4120) * SendToServer <1>: Types for PostOperation. (line 4126) * SetDTime: Types for Resolution. (line 3582) * SetExtrapolationOrder: Types for Resolution. (line 3636) * SetFrequency: Types for Resolution. (line 3587) * SetGlobalSolverOptions: Types for Resolution. (line 3346) * SetNumberRunTime: Miscellaneous functions. (line 2893) * SetNumberRunTimeWithChoices: Miscellaneous functions. (line 2898) * SetRightHandSideAsSolution: Types for Resolution. (line 3484) * SetSolutionAsRightHandSide: Types for Resolution. (line 3479) * SetTime: Types for Resolution. (line 3572) * SetTimeStep: Types for Resolution. (line 3577) * SetVariable: Miscellaneous functions. (line 2913) * Sign: Math functions. (line 2340) * SimpleTable: Types for PostOperation. (line 4311) * Sin: Math functions. (line 2243) * Sinh: Math functions. (line 2282) * Sin_wt_p: Extended math functions. (line 2442) * Skin: Types for PostOperation. (line 4045) * Sleep: Types for Resolution. (line 3631) * Smoothing: Types for PostOperation. (line 4048) * Solve: Types for Resolution. (line 3335) * SolveAgain: Types for Resolution. (line 3340) * SolveJac: Types for Resolution. (line 3360) * Solver: Resolution. (line 1895) * Sort: Types for PostOperation. (line 4184) * Sqrt: Math functions. (line 2238) * SquDyadicProduct: Type manipulation functions. (line 2571) * SquNorm: Extended math functions. (line 2395) * StoreInField: Types for PostOperation. (line 4260) * StoreInMeshBasedField: Types for PostOperation. (line 4266) * StoreInRegister: Types for PostOperation. (line 4235) * StoreInVariable: Types for PostOperation. (line 4228) * StoreMaxInRegister: Types for PostOperation. (line 4242) * StoreMaxXinRegister: Types for PostOperation. (line 4251) * StoreMaxYinRegister: Types for PostOperation. (line 4252) * StoreMaxZinRegister: Types for PostOperation. (line 4253) * StoreMinInRegister: Types for PostOperation. (line 4241) * StoreMinXinRegister: Types for PostOperation. (line 4248) * StoreMinYinRegister: Types for PostOperation. (line 4249) * StoreMinZinRegister: Types for PostOperation. (line 4250) * SubRegion: Constraint. (line 1517) * SubSpace: FunctionSpace. (line 1588) * Support: FunctionSpace. (line 1588) * Sur: Types for Jacobian. (line 3146) * SurAxi: Types for Jacobian. (line 3157) * SurfaceArea: Miscellaneous functions. (line 2733) * SwapSolutionAndResidual: Types for Resolution. (line 3434) * SwapSolutionAndRightHandSide: Types for Resolution. (line 3439) * Symmetry: Formulation. (line 1795) * System: Resolution. (line 1895) * SystemCommand: Types for Resolution. (line 3592) * Table: Types for PostOperation. (line 4301) * Tan: Math functions. (line 2265) * Tangent: Miscellaneous functions. (line 2717) * TangentSource: Miscellaneous functions. (line 2722) * Tanh: Math functions. (line 2292) * TanhC2: Math functions. (line 2297) * Target: Types for PostOperation. (line 4172) * Tensor: Type manipulation functions. (line 2543) * TensorDiag: Type manipulation functions. (line 2566) * TensorField: Miscellaneous functions. (line 2843) * TensorSym: Type manipulation functions. (line 2561) * TensorV: Type manipulation functions. (line 2553) * Test: Types for Resolution. (line 3602) * Test <1>: Types for Resolution. (line 3608) * Tetrahedron: Types for Integration. (line 3235) * TimeFunction: Constraint. (line 1517) * TimeImagValue: Types for PostOperation. (line 4076) * TimeLegend: Types for PostOperation. (line 4273) * TimeLoopAdaptive: Types for Resolution. (line 3725) * TimeLoopNewmark: Types for Resolution. (line 3714) * TimeLoopTheta: Types for Resolution. (line 3693) * TimeStep: Types for PostOperation. (line 4066) * TimeTable: Types for PostOperation. (line 4315) * TimeValue: Types for PostOperation. (line 4071) * TransferSolution: Types for Resolution. (line 3558) * Transpose: Extended math functions. (line 2406) * Triangle: Types for Integration. (line 3229) * TTrace: Extended math functions. (line 2428) * Type: Constraint. (line 1517) * Type <1>: FunctionSpace. (line 1588) * Type <2>: Integration. (line 1747) * Type <3>: Formulation. (line 1795) * Type <4>: Resolution. (line 1895) * Unit: Extended math functions. (line 2400) * Units: Types for PostOperation. (line 4150) * UnitVectorX: Type manipulation functions. (line 2650) * UnitVectorY: Type manipulation functions. (line 2655) * UnitVectorZ: Type manipulation functions. (line 2660) * Update: Types for Resolution. (line 3395) * Update <1>: Types for Resolution. (line 3405) * UpdateConstraint: Types for Resolution. (line 3415) * UsingPost: PostOperation. (line 2038) * Value: PostProcessing. (line 1976) * Value <1>: Types for PostOperation. (line 4178) * ValueFromIndex: Miscellaneous functions. (line 2928) * ValueFromTable: Miscellaneous functions. (line 2940) * Vector: Type manipulation functions. (line 2538) * Vector <1>: Types for FunctionSpace. (line 3033) * VectorField: Miscellaneous functions. (line 2837) * VectorFromIndex: Miscellaneous functions. (line 2935) * Vol: Types for Jacobian. (line 3143) * VolAxi: Types for Jacobian. (line 3153) * VolAxiRectShell: Types for Jacobian. (line 3200) * VolAxiSphShell: Types for Jacobian. (line 3181) * VolAxiSqu: Types for Jacobian. (line 3161) * VolAxiSquRectShell: Types for Jacobian. (line 3206) * VolAxiSquSphShell: Types for Jacobian. (line 3187) * VolCylShell: Types for Jacobian. (line 3172) * VolRectShell: Types for Jacobian. (line 3193) * VolSphShell: Types for Jacobian. (line 3165) * VolumesOf: Types for Group. (line 2152) * While: Types for Resolution. (line 3615) * X: Coordinate functions. (line 2670) * XYZ: Coordinate functions. (line 2685) * Y: Coordinate functions. (line 2675) * Yn: Math functions. (line 2360) * Z: Coordinate functions. (line 2680)